I am making a Flash website. I click on a link,... lets say 'Contact' The 'Contact' page opens. I click on 'Contact' again while it's open,... It opens again. I need to know how to prevent the link from reloading each time you click it
View 2 RepliesI am making a Flash website. I click on a link,... lets say 'Contact' The 'Contact' page opens. I click on 'Contact' again while it's open,... It opens again. I need to know how to prevent the link from reloading each time you click it
View 2 RepliesI'd been following several answers to similar problems with no luck at all, so i decided to try asking by myself:I have a page with several links that have to load data via Ajax using jquery and put the response inside a div. The main "tab" is a flash wich is inside a layer.Every time a user clicks on any of those links, flash container is resized to 0px and set visibility to hidden (trying to prevent the reload behaviour if display is set to none).
All works just fine EXCEPT the first time you click on any link that hides flash layer. In that particular case (only in Firefox) it resets the flash to initial state. I'm going nuts about this..
[Code]...
I did a simple full flash website, but my boss wants to separate the things out, he wants the button on top to be FLASH, and the content below all in HTML format. The problem is in the full flash site I made when you click button on top example: (chemical) you'll notice that the pressed button is being highlighted with a gray color so the users knows where they are, but when i tried to separate the button part i notice the gray highlight didnt stay to where it should be when the button is pressed. how to prevent the flash for being reloaded when the whole page reloads or any alternative to do this.
[URL]
how I can prevent flash from reloading when my page is refreshed? When I user clicks the search button the whole page reloads with the data they were looking for but the flash animation at the top of the page also reloads and I would like to prevent this.
View 9 RepliesI've seen a site a while back that as you went through it it would change the url without reloading the page/swf. I want to know how do you build a Flash banner and buttons and as they the movie plays or they click on buttons have it change the url and the html text but leave the swf playing? Can this be achieved without too much hassle or will it require advanced coding?
View 2 RepliesI don't want to resort to frames so I'm wondering if this is possible. I have an expanding menu on a php page, when user clicks on one of the menu items and the page reloads, the flash movie gets reload as well. I would like to keep it open to where it was, even if it reloads.
I'm using a modified version of Senoculars accordion menu and I thought the best way would be to pass a variable to the flash movie that tells it which menu the user clicked and so expand that menu.
I don't want to resort to frames so I'm wondering if this is possible. I have an expanding menu on a php page, when user clicks on one of the menu items and the page reloads, the flash movie gets reload as well. I would like to keep it open to where it was, even if it reloads. I'm using a modified version of Senoculars accordion menu and I thought the best way would be to pass a variable to the flash movie that tells it which menu the user clicked and so expand that menu.
View 1 RepliesI'm having an odd issue with reloading SWFS. I start of with loading my SWF:
var req:URLRequest = new URLRequest( "RegionalIntro.swf" ); introSWF = new Loader();introSWF.load(req);addChild(introSWF);Then once I'm finished I unload:
removeChild(introSWF);introSWF.unloadAndStop(true);Now when I want to reload the SWF I run the first bit of code again I get this error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.I cant work out why I'd get that the second time it loads and not the first. It's supposed to just be the same? This is being done inside Windows Projector .exe file, it's going to run as a kiosk application. I can catch the error by surrounding all of the code in the function at the top of the stack trace with a try/catch block. I trace the error and its the same, the weird thing is all the code executes as expected. All works fine and then throws an error
I'm having an odd issue with reloading SWFS. I start of with loading my SWF:
var req:URLRequest = new URLRequest( "RegionalIntro.swf" );
req.method = URLRequestMethod.POST;
req.data = true; // POST requests require non-null data
[Code]....
What I can't work out is why that works the first time, but when it's reloaded it doesn't work?
EDIT2: The plot thickens, I can catch the error by surrounding all of the code in the function at the top of the stack trace with a try/catch block. I trace the error and its the same, the weird thing is all the code executes as expected. All works fine and throws an error ... very odd! I'd hate to leave it like this without finding out why it's doing it though ...
I need browser refresh (page reloading), when we click on button in swf file. i dont know flash scripting. i want just html page reload when i click button in swf file. i want code for page refresh.
View 1 Repliesi made a video player with the xml playlist , it's a video channel indeed, it's embed swf in html. but my boss would like me to put a link on the web, when user click the link, it would directly play the specific video inside the video channel. is it possible to do it without server side script but javascript?
View 1 RepliesThere is a webpage based on PHP which use a swf flash file. inside .swf flash file there is a link connection to a website like [URL] How can i write a code for preventing it to connect to something.com from inside PHP file?
View 1 RepliesI need to suppress the default right click menu for flash embeds.
I've set menu to false, as well as used a stop default function on the right click event, but it still displays the menu.
Also, I don't have access to the .fla's, as the flash objects weren't created by me.
I had a dynamically created list of MCs that each had rollover states as well as click actions. Everything was working fine...
...Since the list was longer than the bounding areas that I wanted it constrained to, I added a mask to the container MC that was holding the dynamically created list (using AS3 - not through right-clicking the Layers). Now the list is still being generated, but the CLICK and MOUSE_OVER events are not working.
I have a Flash Professional CS5 project in Flash Builder 4, i'm trying to find a way to prevent it from publishing the FLA everytime I save, I only want it to publish when I actually debug or run it.
Is this possible, it's driving me nuts, I can't do inline checking without saving, but saving means I have to wait for the FLA to publish.
how to prevent any two objects from overlapping each other each time they are randomly played?
i make them randomly appear using the code below but some of them appear on top of the other.
onClipEvent(load) {
_x=Math.floor(Math.random()*271)+120;
_y=Math.floor(Math.random()*265)+120;
}
I am using Flex Spark Slider as a time-line for a Flex video player custom component I have created.
I want to prevent the user from clicking on the slider and changing its value, but at the same time I should be able to change the value of the slider programmatically.
Setting the "enabled" property for the slider to "false" doesn't help as then I am not able to change the slider value programmatically.
I am wondering how can one stop the user from clicking on a button (MC) without using btn.enabled = false.example: i have a menu that has buttons which have tweens on rollover and onRelease events. I want to be able to click on home for e.g. disabling all other buttons to avoid user clicking but still keep the rollover. I have tried btn.enabled = false and of course i dont want to disable the entire btn and instead i want to disable just the onRelease event or even avoid the mouse from clicking until the animation finish. Only Then, user can click on another menu button.
View 3 RepliesI noticed that when compiling a flash file (test Movie) and when I am loading some content from a webserver that is slow that I think flash is thinking it takes too long and crashes. So is there a way to control the compile time to prevent it from crashing?
View 1 RepliesI'm trying to prevent keyboard show when I click Textinput field on my device. I use Textinput only to show some text and for click event (to push a view).
View 2 RepliesI am using a flash swf from the website[url]...where it allows me to upload images via an xml file to the flash movie. However the flash movie is changing the mouse cursor to hand-cursor when passing the mouse on it, and also it is allowing users to click on the movie, while I wanted to leave the mouse cursor to remain as an arrow, and prevent users from clicking on it, I tried the following code, whereby I used another flash movie to call the dewslider swf, but in IE it is not working, although in firefox it is ok..[code]...
View 4 RepliesI made a game as the same site URL..Anyone knows how to prevent user open and play game on multiple browser windows at a time?I used flash control to embed flash into aspx page and connect to sql server
View 4 RepliesI've got sIFR setup to replace a navigation menu (looks pretty slick). It's individually replacing the LIs and their internal links. I have an onRelease tag that throws properly, extracts the actual href link address, all good so far. I want to tie this into an AJAX page loader, with backwards-compatability (+SEO) for the individual pages being able to load themselves. I've tried return false like I would for standard links, no dice.
I'm assuming it doesn't work because it's onRelease, not onClick or something BEFORE it is already changing the page? onClick doesn't seem to be a valid sIFR function, documentation at [URL] onRollOver, onRollOut, and onRelease.
I've got a bar chart with some elements.values as this:
[Code]...
This doesn't work, although the openflashchart doc says Each dot can have its own on click event. and Don't forget that all charts can have on click events
I want a link to trigger a sound click in flash AS3. I've taken the .play() outside of the function to confirm that it works by itself. What am I missing that will let me call an AS3 function from javascript?
Here is my html
<object width="5px" height="5px">
<param name="movie" value="play_coin_sound/playCoin.swf?v=5">
<param name="wmode" value="transparent">
<embed src="play_coin_sound/playCoin.swf?v=5" width="5px" height="5px">
[Code] .....
What I want is use a one page website like this:Unfortunately I have to have 50 posts first to place a link But on the website of project seven you can see the template named "Mercury" .And place 5 swf players on 5 different locations.Then when I click a menu button to go to an other location on the one page web site, I want to let the swf stop on the page where I am at that moment, and the swf on the location where the link leads to to start.
View 6 RepliesAs you can see from the attached load.swf, when I click on link 1, a blue movie 'runs in', and when I click link 2, an orange movie 'runs in'. Alls well right? Unfortunately, when I click link 1, it runs *behind* the orange file, so it can't be viewed.What I want to achieve here is that with every link I click, it overlaps the prev file, but the method I tried here only works if the user *nicely* clicks from link 1 to link 8, and not randomly. Any ways to go about this?
View 1 RepliesIs this possible? Do I have to use JavaScript? 1) If I have 20 html links on a site, what if I wanted each link to open up a new SWF movie? 2) If 1 is possible, could I then go further and not just open an SWF, but open it and issue a command?
View 3 RepliesI am using CS3. Here is what I am trying to accomplish:
On my loading page I have the following standard loading code:
Code:
stop();
this.loaderInfo.addEventListener(ProgressEvent.PROGRESS, onProgress);
this.loaderInfo.addEventListener(Event.COMPLETE, onComplete);
[Code].....
Because on some connections this can take quite some time, I want a link to appear after a specififc amount of time, say 10 seconds? Kind of like a, "loading too slow? Click here for whatever."
how to accomplish this within this loading code and frame?