i've been through alot of forum space and can't seem to find a way to fix this problem of mine. i have an mc named arrival and another named guy. i put this code on guy to make it play forward then reverse once you rollout on arrival.
Code:
onClipEvent (enterFrame) {
if (arrival.hitTest(_root._xmouse, _root._ymouse, true)) {
[code].....
I am creating some buttons for a menu, and am using movie clips so that I can have a multi-frame effect on them when you roll over them. The buttons are flowers that bloom on rollover, and I only want them to play once- so the first time you roll over them they bloom, and then they stay in that state as long as you're on the page.
So far I haven't been able to figure out how to do this. I can create the animated rollover effect, but the next time I rollover them, it plays again from frame 1. I've tried using a variable that increases by one every time you roll over it, and then if it's greater than 0 it doesn't play, but I don't know how to set it to 0 at the beginning without it setting to 0 every time you roll over it.
Like if i have an instance of an mc called NavBT which is inside a button. now on the button actions can i put this code:
on (rollOver) {
this.NavBt.gotoAndPlay("lb-over");
}
so that when i rollover the button it goes and plays the label called lb-over which is inside the NavBT?
I hit enter,it only plays next frame and then goes back to the frame where it stopped. What I've tried was something like:
stop();
Key.addListener(Key.ENTER)
if (Key.isDown.ENTER){
play();
};
I want it to play all the way to the end,not just go back.
I am working on a website where I have some movieclips on the stage scattered. Some overlapping each other. Now when I move my mouse over any movieclip, I want the movieclips around it to move away from it and when I rollout they should get back in place. An example of this can bee seen on [URL].
View 6 Replieshow do you do the following
A movieclip is playing...
When it reaches frame 20, it goes back and plays at frame 5. Then it keeps doing this. To me this is harder than it looks
In my CS4 flash document I have created a media gallery. It's a very simple interface that has mouse overs on thumbnail pictures, and then the larger picture will fadeUP in the center of the document. (With use of framelabels in the timeline).
In the same document, I want the user to be able to click on a video thumbnail, and that video plays back in the center of the document. Several questions: If the user clicks on the thumbnail "onrelease," the time line goes to the player, is it possible to stream this video from a youtube clip into my media player on the screen? If not and I have the document in a fl4 format, is there a simple process to have this video open? (I currently do not have the document in fl4 format).
[Code]...
Ok ... so i think this is related to bitmap caching however the "this" is a dynamically created object that then dynamically has a .jpg placed inside of it. I want the object to disappear on rollOver and go back to normal onRollOut. But i can't figure out how to assign bitmap caching to the dynamic jpeg or this.movieClip as they are both dynamic.
I want my flash file plays one and stops in the end and only plays again if play again button is pressed.How do i do it?
View 1 Replieswell i want to make buttons that on rollover move to left, on rollout move back to their initial position, and if clicked, they but stay this time at the final rollover place, and be there until something else is clicked. When something else is clicked, the previous button , returns to its initial place. So i ve got it all figured out except for the freeze and move part when the buttons are clicked. All it does now , is when they are clicked they freeze at the position i want, but i havent got a clue how to update them, after so they start moving back, and reacting on rollover and rollout, when the next button is clicked.
[Code]...
I want my movie to loop. Would prefer an If/Else loop so that the movie plays a certain number of times then plays the opening of a screen then stops. This is a simple 4 screen ad I am doing for a school project. Can't get it to work. I tried containing my code in the proper loop syntax, didn't work. Then wrapping the loop in a function and calling that with a timer event, didn't work. My final solution was to call my whole movie in a timer event set to play once. Then calling the entire movie again in a second timer event set to play 20 times and set to start at an interval when the first movie ended. This did work but each time the movie plays thru function calls drop off making the movie degrade.
[Code]....
This is my first post here and it my be a hard one to understand? Overview I have four buttons on the main stage (info) (help) (bio) (main) When you Rollover a button it fades to another color/when you rollout it fades back to the original color I have a script that does the color change because I do not want to use motion tweens. Here is what I did I made a 2 frame MC named infoMC In the 1st frame of the MC I made the word (info) a nested MC and attached the color change code to it. The 2nd frame of the MC Is the same as the 1st frame but I revesed the color change
[Code]....
The script for my timer worked for one button but as soon as I set up the other 2 buttons to do the same, I started having a problem where the rollover action would go after the set amount of time was up but then would repeat itself once after the set amount of time was up again. just to clarify, if it needs it, the reason I don't have a rollout attached to these buttons is because I want the menu to stay out until you leave the menu area
so I have an invisible button called menuin_btn which sits to the right of the menu and covers the rest of the stage where the content will be, so you have to rollover that area for the menu to roll back in. The "rollin" in my code brings the movie clip to frame 16 (the end) where I have a gotoAndStop(1); command to get it back to frame 1 so the rollover can be used again. I've attached a zip with my current flash file and swf and here is what my current script looks like on the main scene:
[Code]...
I am making a ball move from left to right and back. but when I rollover twice quickly, it also accepts the second rollover command. I would like it to accept that second rollover only when the first one is finished. I mean, I want the first to be finished before it accepts another rollover.I know it is simple to solve this with a tween using frames instead of as, but I was wondering if someone knows how to adapt the script.
on(rollOver){
ballTween = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut,balMC._x, 44, .5, true);
ballTween.onMotionFinished = function() {
ballTweenterug = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut, 44,11.9, .5, true);
I'm using actionscript 1.0 and 2.0 on flash Pro 8 and keep getting an error when I test the movie. Here is the error:
[Code]...
I've tried to create this rollover navigation...starting over 6 times already. Is there different language / coding for 1.0 and 2.0? I don't understand what I'm doing wrong.
i wnat to show the message "Hi how are u" as a rollover message or a tooltip when i rollover the hyperlink Know More
View 1 RepliesI have a Flash website with 3 interfaces( 3 frames with movie clips inside). they have a button that goes to different loaded .html page(text). But once the back button is pushed on the web browser, it always goes back to the first frame instead of the actual last page, which might have been frame 2 or 3.
View 1 RepliesI have a project (see attached) where I need to have the folders seem like they are floating in space, and I need the best way to make it so when you click on a back folder, it slides off the screen and come back in front of all the folders.
View 2 RepliesAnyways I am using action script 3.0 and I created multiple layers using just one scene. I created a layer with lables on them to mark where I want my buttons to point to and go to. I have the stop (); on the first frame. And I made my buttons mostly interactive with movie symbols and tweens.My first scene I have 2 doors, the user can pick which door to go to and it takes them into a different path.I made the buttons that are clicked to go forward, and then I tried to make an invisible button on the button edge of the scene to go backwards However, the PROBLEM is when I click my button to go backwards I am stuck on the first page and can't move forward.
function gotoOne(evt:Event):void{ gotoAndStop("one")}backbutton1.addEventListener("click",gotoOne);
function gotoFour(evt:Event):void{
[code].....
I'm trying to create a rollover for a movie clip. On rollover, a line underlines the text,and when it rolls out, the underline reverses. This works fine the first time. The next time you rollover, the animation doesn't work. Then when you move the mouse off the button, a line appears under the text and doesn't go away. Here's my code on the invisible button.
on(rollOver){
this.gotoAndPlay("animIn");
}
[code].....
The animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
View 1 RepliesI have a GUI using Flex. I have a condition like i need to execute some command line arguments in the local machine and get the results back or output back to a textbox area. How can i do a button on submit, execute command in the local machine and return the output?Command to execute example:
echo logfile.log | grep username
Code:
button1.onRelease = function ()
{
// in this computer, it will now run a command, please wait.
}
I am working on a having external swfs get loaded into the main swf one by one from an array.I can get the first one to load, but it just keeps on playing the first item in the array over and over, instead of loading the next movie. I have a container on my stage, cleverly named "container" and I am using AS2 and loadMovie.
I am guessing my conditon on my if statement is off, but I am not sure how to tell the onEnterFrame to check the currentframe of the loaded swf and not the container itself. I might be way off, but in my mind I feel like this mostly makes sense, but knowing Flash it is probably not nearly enough coding.I might also add this won't be running on the web, so I don't need to worry about preloading swfs since it will be running directly off a PC onto a screen in our office.Here is my code:
Code:
var myClips:Array = ["movie1.swf", "movie2.swf", "movie3.swf", "white_logo.swf"];
var i:Number = 0;
_root.container.onEnterFrame = function() {[code].....
I've got the standard scene 1 with three frames on it. the first frame has a movie clip with about a 70 frame timeline. the second frame has a movie clip with about a 20 frame timeline. the third frame is black with a stop action. i'm trying to make a leaderboard banner, and i need each clip to play one after the other.
right now, when ctrl+enter it plays nothing. i actually have to rewind it to have it play the first clip. then it just repeats the first clip and completely skips the second. in the first clip's timeline, I have a parent.gotoAndPlay(2); on the last frame.
I have some knowledge of Flash, but not enough obviously. Right now I've got the standard scene 1 with three frames on it. the first frame has a movie clip with about a 70 frame timeline. the second frame has a movie clip with about a 20 frame timeline. the third frame is black with a stop action. i'm trying to make a leaderboard banner, and i need each clip to play one after the other. right now, when ctrl+enter it plays nothing. i actually have to rewind it to have it play the first clip. then it just repeats the first clip and completely skips the second. in the first clip's timeline, I have a parent.gotoAndPlay(2); on the last frame.
View 1 Repliesi want to know how we can make back button in flash to go back to page same like browser back button.
View 1 RepliesIn my apps, i would like to:
1)have a pop-up menu when a button is touched, then ok to close but still in the same page as it is
2)invoke the popup menu by using samsung's "MENU keycode",then ok to return the same page as it is
3)having the user to swipe 5 images to view them, left image as 1st and 5th image as last image with smooth transitions
4)and also using the "BACK keycode" to go back to previous page
I have a button set up, that when you rollover the button, it changes into another picture and stops, and also when it's rolled over, a large picture appears under the rollover.But when I first rollover the button, it acts like it's told to go to the out state. When I rollover it again it works fine.URl...there is my code to go into the movieclip and play the button
View 1 RepliesHow do I do a onRollOver detect without using the onRollOver function?I have a movieclip and when it's rolled over I have it zooming using the AS2 tween function.In that movieclip there's a form with fields, and if I use the onRollOver function on the movieclip to zoom, the whole movieclip becomes a button thus preventing any input into the form fields. Is there an alternative I can use?
View 6 RepliesOkay, now things are getting a little complicated. I need to build a Flash object that can sit over the corner of an image to serve extra content. It's way beyond my Flash skill level, my work is usually limited to print work in Photoshop and Illustrator so please excuse me if any of the following isn't clear. I am trying to learn though, So this is how it's all supposed to work, along with my issues; When the image & Flash item load a small looping animation will play to draw the eye/show the item as interactive.
When the user rolls over this the corner will peelback. I have a working peelback animation for the rollover, that reacts to mouse over/mouse off, and a looping animation for the initial, but I cannot work out how to make the initial loop until mouseover, then play the peelback when the mouse is over. And go back to the initial animation loop if the user rolls off. (Each of these animations is stored as a movie clip in the Library)
Then it gets more complicated... if the user stays on the corner until it is fully peeled back I need to make a small countdown (sort of a 3, 2, 1 situation) show, before launching a lightbox (would this have to be jQuery, or could it be done in Flash?) in the browser to serve the content.
[Code]...