hopefully this is possible:
-1 large html (home.html) file houses 2 html files (aaa.html and bbb.html)
-aaa.html consists of 1 swf button
-bbb.html is empty
question: is it possible to click on the button in aaa.html and have the action occur in bbb.html? (for example, clicking the button in aaa.html will load a swf in bbb.html)
I am designing a web application in Flex 4 and currently facing an issue rendering advanced HTML tags and entities in Flex 4. All I want to do is basically render an HTML text coming to me something like the one given below:-
[Code]....
i have a flash button and i want to pass the button link (after click) as parameter.
View 2 RepliesI have a Flash-based SWFUpload upload button in a HTML page. I am trying to style that button. SWFUpload provides a Javascript setup interface to the Flash button's settings. I don't have Flash myself, so I have to work with the pre-compiled SWF file.
[Code]...
Following embed code is from [URL] but it doesn't work in Internet Explorer 8. Firefox no problems. Any recommendations for improvements?
[Code]....
UPDATE 2010-05-14: If I'm not mistaken HD.se uses Flowplayer and all those flasvars are for that. Perhaps someone here is good with Flowplayer? I've never used it myself.
trying to work with "simple" XML for the first time. I'm building a small CMS for a Flash based site and the content is held in an XML file. My problem is that many of the copy fields are XML CDATA fields. on the one hand, with:
$xml = simplexml_load_file($file, 'SimpleXMLElement', LIBXML_NOCDATA);
I can pull the data out of that node and the CDATA tags are stripped. My issues come with trying to save the data with:
file_put_contents($file, $xml->asXML());
Problems are: a) tags are interpreted with their HTML entity equivalents. I don't want this to happen.I gather this is coming from the asXML method because even if I do anhtml_entity _decode on the $_POST data it's still being converted.
b) because of the above, there's no way to add the CDATA tags because they also have their charachters converted.
I have a html/flash site now, [URL]. i access email from my site itself by giving the userid and pwd text box which i copied from the actual website hosting my email access. i copied the entire <form...></form> tag to my page and thus was able to put the name and pwd in my home page only and access the email in a separate window. now i have redesigned my webpage using only flash. i would like to know how i can implement the same using flash. as i have not much experience using action scripting i am a bit stuck about how you pass the hidden form variables. the below is the the exact form syntax:
[Code]...
I need to allow users to preview audio files for purchasing. I have CF pages that return records form a SQL database. Each record contains the same swf file however, each swf file points to a different mp3 for previews of different audio examples. So far, everything is working fine. My problem is that I need to be able to stop the sound from one swf when I click to play a second swf .The only solutions I see in Flash forums deal with loaded swf files. These are not loaded files they are separate files within a page. The question is: How do control one swf from another swf in the same page.The following items have not worked: soundChannel.stop();,soundMixer.stopAll()
View 2 RepliesI was wondering if anyone has came up with a way to float html elements, with some content, over .swf without triggering any flash events.
In my case the problem is I have flash map, and drop down menu on top of it.
I simplified this into the following example:
[URL]
If you mouseover any elements in gray box, you will see that stuff behind it, in a flash file, triggers hover effects.
I was wondering if it is possible to create a flash movie that rotates values that are stored in HTML. For example if i have these 3 containers:
<div style="display:none">
<img src="someimage1" />
<span class="text1">text1</span>[code].....
I want to have some flash movie rotate these values every 10 seconds. I don't want to program it hard into flash, it has to be variable. It has to display the first set, then after 10 sec the second, and so on.Maybe if it is possible something that stops the toggle, and skip to just the second, or just the third.I also don't want to use javascript to do this (jQuery etc.), because this conflicts with another timer on the website.Is there a way of doing this?
Is there a solution to have the background audio/music play across multiple page on a website, WITHOUT restarting on every page load.The website currently uses a frameset, but I'm looking for an alternative.
View 2 RepliesI have a swf that I have created that make a few HTML posts. When I run and compile the swf locally, it successfully makes posts to my php code hosted on my domain. However when I then upload my swf to my domain, and then alter the embed tag to have a fully qualified path to my hosted swf, the swf will load correctly but it will make any HTML posts to my PHP scripts. The reason that I have an an embed tag with the fully qualified url in it, is that my goal here is to be able to place the html embed code on a number of different sites.
I have it working on a single remote site, and it has a wild card crossdomain.xml file in it. However when I try to apply a crossdomain.xml to any of the hosted sites, or to my computer locally nothing runs when the I use the embed with the fully qualified URL, if I just the locally hosted swf on my computer the HTML post work just fine. I feel this is related to the crossdomain.xml file, however I guess I'm not understanding some aspect of the security model.
I have a scenario that I get an string with html data, this is not just html data it's an email (outlook) saved as an html file and dropped in the string.Now this string needs to be formatted to an html document and should be a clickable link in a datagrid. So when I click on the link, the HTML document should pop-up and should gave me a nice HTML page that is readable for the normal users. I hope it's a bit clear what I want o_0. don't know where to start.
View 3 RepliesI am looking for a very basic html editor (similar to the one being used in this forum to make entries - only more basic)...which ONLY uses html tags supported by the AS2 textfield....
View 1 Repliesnew using flash, is it possible to load an html or htm file in a flash movie clip?
View 1 RepliesI have a piece of Flash on an HTML page that when you hover over it, it expands out to reveal more information.There are text links that it expands over, however in everything but IE, when it's not expanded those links are still covered by the Flash making them unclickable.I have the Flash piece in a separate DIV wmode set to transparent.
View 1 Replieswhen I layer an swf over html, with all the good stuff in place (wmode = transparent, z-index), I can't access the html elements in Firefox/Chrome/Safari. Here's a link to a test [URL] This is a stripped down version; I've also tried using swfobject.
View 1 Replieswhen you go to the home.html page an animation will play from start and then stop at the end of it. However, for all other pages i.e contact.html aboutus.html we need the animation to skip to the end straight away and not to play the whole animation through. I was thinking this would be controlled by a variable or some kind of external text file ect. Basically in the first frame the actionscript needs to basically say
"if this html page is aboutus.html then go to the last frame and stop" and with the index page it would say "if this html page is index.html then keep playing"
I have an Air Application that uses a HTML Component. The HTML page that the component is rendering includes images with title tags. The tags render fine outside the Air Application, but when run in the AIR application, they do not render.
View 1 RepliesI have created a textArea element but cannot display my HTML content. If I just display regular text it works or if I change the textArea element to a RichEditableText element it works fine. Since this is for a mobile app I would prefer to use the textArea element as recommended by Adobe.Here is the MXML code for the textArea. All I get is the border and no content displayed.
<s:TextArea id="myHelp" editable="false" width="100%" height="100%">
<s:textFlow>
<s:TextFlow>[code]..........
I have AMFPHP installed on my server. I have a flash app that can call it's methods. I want to create some HTML (on server created) pages which will contain HTML code and results of AMFPHP functions. How to create such thing?
View 1 RepliesI would like create a text area with code highlighting in flex. Is there an advanced textArea witch suports css for real. For example:
myHtmltext:String = '<span class="keyword"> #include </span>';
myTextArea:TextArea = new TextArea();
myTextArea.htmlText = myHtmltext;
I need to parse an html source in order to obtain some links...Let's assume we have:
<html>
<head>....</head>
<body>[code]...
I only want the link1 which is a child of a div with class class1
I have an <mx:HTML/> component in my flex air app that shows a web page. The problem is, if the web page has a link on it and they click it, it does not take them to that page. Is there a way to allow this, or a work around? is there a way for the loaded webpage to send Flex info about events that occur in it?Here is my code:
<mx:HTML
id="html"
width="100%"
[code].......
What am I missing here because my video doesn't have any controls? Is there a special parameter I need or do I need to encode the SWF file in a special way? I just used a MPEG to SWF converter provided by Blaze Media Pro.
View 2 RepliesUsing the flex text area I am trying to put an image inside a list. Whatever I do, the image is pushed to a new line. The html is below. I want to show text and the image on the same line in list item 2. I have taken some of the formatting out for readability.
[Code]....
I have HTML + CSS text. I need some lib with simple function like "Render String Var conteining HTML" So no external files (like in flash lib called HTMLwraper you just have to play your SWF on top of HTML). dinamic! I give it string it renders It into some conteiner (not as a bitmab but as if it was real HTML dynamically rendered in flash). (And I need real HTML + CSS support not what normal rich text block gives us)I am going to use it in with Flex (Flash Builder) so I like MXML component model but even pure flash AS3 will workout.It should be Free and Opensource (any license like GPL, LGPL etc will be ok).So Is out there such flashflex library for HTML + CSS dynamic rendering (rfom given String or XML)?
View 1 RepliesIs there a way to create a mini window in flash that contain an HTML web page?
View 1 RepliesWithout including swfobject.js can only swf files be loaded through html.And if so is there a common tag for all the browsers.
<object id="myMovieName" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000">
<param value="movie.swf" name="movie">
<param value="high" name="quality">
<param value="#FFFFFF" name="bgcolor">
[code]...
I want to make div into my intex.htm file (already built site) to place in a .swf file that will cover the whole screen, and a few seconds later the animated page will disapear and the htm page will appear. I don't want to make different htm file, neither put a button on flash(ie on click...). I just want after a few seconds and after the flash has ended, the flash will go away and the page will appear.
View 1 Replies
