I have made a map that zooms and drags but I need it to change between zooming and draging when I click on different movie clips. I was thinking it was best to use an action listener but I wasnt able to incoperate it into this project.[code]
View 1 Repliesam hoping someone here might have some source in the little bag o' trix that will put me on the right road to achieving the following. i am trying to work out the best way of creating a movie that has buttons that when clicked will zoom into and centre a certain area of a larger movieclip?
and then a way of dragging the zoomed into movieclip around the stage area? or panning using x/y positions of the mouse. (and without asking for the moon on a stick - if the user clicks on a empty part of the zoomed mc - it zooms back out to it's original size position?)
any have any fla files or know of any good tut's or threads that can will give me a leg up to get it working? fingers crossed has done this before or know a good place to start?
I am litteraly going crazy because ive tried all the codings ive been able to find on the web and nothing works.
what I need is to make something similar to google maps: [URL]
my map is pretty big, and what I want is to be able to drag around the plane and zoom in and out.
Actually, I'm struggling with a flipping swf. I did lots of research, and know about flash component. Now I can make a simple swf flipping book like this. [URL]. However, I wanna add more functions in it. Like this. [URL]. This example is a html..contains css, javascript..etc...
just wanna know, is it possible to do the same thing in swf version?
That means..I want to make a flipping swf that i can:
- flip like a digital magazine
- double click to zoom in/out and drag
- also have buttons to control
i'm struggling with a flipping swf. i did lots of research, and know about flash component. now i can make a simple swf flipping book like this.. [URL]
however, i wanna add more functions in it. like this.. [URL] this example is a html..contains css, javascript..etc... just wanna know, is it possible to do the same thing in swf version?
that means..i want to make a flipping swf that i can:
- flip like a digital magazine
- double click to zoom in/out and drag
- also have buttons to control
anyone know a decent tutorial that will show me how to zoom a movieclip with a slider bar and or buttons etc and then click and drag the image around.
View 5 RepliesI've been putting this together and ran into a wall. I'd like to have this drag scroller drag left and right. I'd also like to have it zoom in/out according to where the mouse has been clicked. i.e. zoom to the mouse when clicked. I would also like to be able to scroll left/right while it's zoomed in or out. As a bonus, it would be nice to get the original blur working as well, but thats just an extra
The code is below...It's based on blur scrollbar
Code:
#include "mc_tween2.as"
hand.onEnterFrame = function() {
this._x = _xmouse;
this._y = _ymouse;
[Code] .....
I'm new to the forum, and to flash. I'm trying to create a photogallery in flash, with buttons. I already got the button part ready, but I'd like to add a drag and drop, and a zoom in /zoom out button out option. The problem is, I can get the zooming thing, and the drag and drop thing in AS2, but not in AS3! I'll link the script I used for the button here, as well as a screenshot of my timeline.
[Code]...
i have an image (possibly that has an animation), that i want to zoom when i roll my magnifying glass over it. i want it when you click on the handle to pick it up and move it and when you let go it lets go of it.
View 1 RepliesI have a flash file, where I want to use default zoom function from Flash menu in swf player. Clicking "Zoom In", zooms into the swf file. Then when I try to use drag from mouse to change visible area, it does not work on moviclips. If I click on top of blank area, I can drag. Though this works fine in Flash as2 file.
View 5 RepliesI want to make a scope wich can zoom in on button click and go back to previous stage (zoom out) also by clicking a button.Now i made it work for zooming in (when i click my button it zooms) but when i want to zoom out everything i tried didn't work .Here is the code:
//button for zoom in
zoom.addEventListener(MouseEvent.CLICK,glassMove);
function glassMove(event:MouseEvent):void{[code]..............
i've made a button that zooms into a movie clip on a rollover, but it on moves it a certain amount each time you rollover the button. code below:
on (rollOver){
_root.Mypic._width += 5;
_root.Mypic._height += 5;
}
wot i want it to do is to continue zooming in for as long as the mouse is over the button, is there anyway i can change the code to zoom in at the same amount but do it continuously until the mouse is moved off the button. Also is there anyway that i can set it so that the zoom stops at a certain percentage, i.e. it only zooms in so much and then stops. What i mean is that the user can zoom in but the picture will only zoom in to say 200% of the original size.
I am working on flash application TELESCOPE or Camera. My goal is to move around the scene and zoom-in or zoom-out I found that if I move scene, I have to move registration point, because I always want to zoom in the centre of my ocular. So far application works fine only if I move, zoom-in and than before I move any further, zoom-out! But when I move, zoom-in (not fully), move again and zoom-in again, the second zooming doesn't appear on desirable registration point
View 1 RepliesI have this code for my effect to zoom in and zoom out in certains buttons
canada.addEventListener(MouseEvent.MOUSE_OVER, canadaover);
function canadaover(event:MouseEvent):void
{[code]....
the problem is when u reach certain corner of the button it kinda gets into a loop, any ideas how can i fix this?
Using flex / air 2.6 working on an Android device, I am using a canvas with a TransformGestureEvent for zoom in on a map. The listening of the efect is working ok, but I can´t seem to find the information on wether the user intended zoom in or zoom out (fingers getting closer or getting apart).I expected the intention of the gesture to be identifiable with the offsetX and offsetY properties of the event, as you will do on a swipe gesture event. But I always get 0 for both properties, no matter how I do the gesture in the device.How can I know if the fingers getting closer or getting apart in a gesture zoom event?
View 1 Repliesi had a flash file, and the image was dynamically loaded in a movieClip. when i double click the image it will zoom max. and another double click it will retain its best fit.
View 0 RepliesI need to have a button to be clicked for the zoom effcet to be activated, then when the mouse hovers over an image it should zoom to 200%. I have 40 images which I'd like to have this effect by.Also when the cursor is over the image is it possible to make the change the cursor to a magnifying glass?
View 1 RepliesI'm developing a full screen zoom/pan UI. Everything is working great, except I can't get it to center on the correct point when zooming in.
You can view what I have here: [URL]
The numbers in the top-left corner are the navigation, and the white boxes represent the individual sections.
I have a large container movieclip that fills the entire page. Inside of that movieclip (site) I have all of my individual section movieclips (section1-section6). I'm also using a dynamic registration point class to dynamically set the registration point of the "site" movieclip to the current selected section, so that the zoom in/out is centered on that section.
When a user clicks on a navigation item, I first reduce the _xscale and _yscale of "site" to 80, when that is complete I move _x and _y to the position of the selected section's movieclip. When that is complete, I set the _xscale and _yscale back to 100. Right now, it is not zooming in centered, so I have a final step where I correct the _x and _y position after zooming back in.
If I don't zoom in/out I can successfully pan the movieclip and center on the correct section. I believe the problem is that I am moving the _x and _y to the position of the "site" movieclip as if it is at 100%, but since it is at 80% it is not moving to the correct position. I tried to fix this by giving the _x and _y coordinates as:
endX = endX / 100 * 80;
Which made it a little better, but still not centered. I have a feeling that there may be a fundamental flaw in my approach to this.
For some reason the forum won't let me attach my .zip, so I posted it online, as well: [URL]
My code below, in case you don't want to download the file:
Code:
tile._alpha = 0;
currentSection = section1;
//** Set Stage **//
[Code]....
How to make several MCs to zoom in on mouse over and zoom out to it�s original scale on mouse out??? all this with actionscript and with some ease (elasticity) to make the motion more natural?
View 2 RepliesI need to have a button to be clicked for the zoom effcet to be activated, then when the mouse hovers over an image it should zoom to 200%. I have 40 images which I'd like to have this effect by.Also when the cursor is over the image is it possible to make the change the cursor to a magnifying glass?
View 3 Replieshow do you edit a movie so that when you right click the movie...it wont show all the things like "zoom in" or "zoom out"???
View 2 Repliesi have visited a very good flash site..I gotta give credit for their dedication and their work as well. [URL] I wonder, how they put all those animation in a banner with that small size of file ? I mean banner's size is not big at all. My other question is that, how do you make it "zoom in and zoom out" on a movie..Like on those banners. Do they binding all the layers to make it a movie then resize it on the movie or what?
View 3 Repliesi want to zoom in on an image by clicking one particular region and zoom out by clicking again. how can i achieve this.
View 6 Repliesi want to make flash drag a ball onpress and if its onrelease and if its on the Suquare movieclip it should stop draggin. my code is like this
[Code]...
I want to have an image and when I click on the image ,one can hold down the mouse and drag a copy to where ever on the stage and when one lets go, one can drag another and another with each copy still being able to be dragged after released.this is what i have but its pretty simple and doesn't work....
stage.addEventListener(MouseEvent.MOUSE_DOWN,makeA Box);
var i:Number = 1; //i will be the total number of boxes
var newBox:myMC = new myMC();[code]....
Im having trouble with this and its going wrong. I need to use actionscript 2 and im on flash cs3.
View 3 RepliesI have a function that states when movieclip1 is dragged and hits a line then it stops the drag, however it seems to stop the entire drag function in the swf on the other movieclips even though they arent called in the function.[code]
View 1 RepliesIm trying to do a drag and drop system where the user can drag a movie clip into an area. Although i would like to make it snap to a target instead of just sitting wherever it lands in the area. Problem Two:
The next thing i am trying to do is when the user has a movie clip on a target already, and trys to put another movie clip in that target area, it will replace the one thats in there and go back to its current position. Here is the script of what i have done so far:
[Code]...
I have some movie clips. i want to drag all clips when i drag single movie clip. Ex. I have movie clips "A1", "A2", "A3", "A4", "A5" . Randomly visible some of them. Suppose "A1", "A3", "A4" has visible. When i will drag "A1" movie clip all these "A3", "A4" also move with "A1".
View 6 RepliesWhat's the code to start drag and stop drag. I would also like to know what's the code to detect if the object has been dropped on something. I know the code in AS2 but i cant figure it out in AS3.
View 3 Replies