I want to know how to create a tween so that at start of it my movieclip called myBox will be at say 6 blur on the x and y. Then at end of tween it is at 0. And I need to be able to say how long it goes for. I have a tween already that makes it move, that was easy but making it blur as well isn't easy. How to do this?
View 9 Replies
I'm new to Actionscript 3.0 and I want to create an interactive menu. On the left as I hover over the button "products" I want a sub menu to come into view (as seen in the graphic below). I've created all the graphics but there are a lot of translation issues.
Here is the code I've used:
import fl.transitions.Tween;
import fl.transitions.easing.*;
var startY:Number = productsSub_mc._DisplayObject.y;
var myTween:Tween;
var myTween2:Tween;
[Code] .....
"productsSub_mc" is the sub menu I created as a movie clip. Within that movie clip is another button labeled "videos". When I run the preview, I get the following error:
1084: Syntax error: expecting rightparen before semicolon.
I want the transition to blur slightly, but not the movieclip, which contains a jpg. How can I write this with ActionScript 3?
View 1 RepliesI have MX and MX 2004. I'm building myself a website and I have a logo that's displayed in the center of the stage. I have 6 different colored logos. I would like the grey logo(main logo) to blur and jitter a little while blurred when it's moused-over. I would also like to create a transition so that when people view a different section (lets say the teal colored section) of my site, the grey logo will blur and jitter while blurred, but also fade/transition into the teal logo. purple for the purple section, etc... I know how to do fading tweens, however I don't know actionscript very well at all. part of it even if it all can't be done together. I'd like some version of this effect if possible.
View 13 RepliesAm trying to use the Tween class to scale and move a movieclip. Now the movieclip is within the loader, so I need the motion to be controlled by the percentage loaded. Now the code to move the movieclip to its final position is:
var xscaletween:Tween = new Tween(mstone, "_xscale", Regular.easeOut, mstone._xscale, 220, 6, true);
But this is the final location, I want to be able to change the properties of xscaletween, yscaletween, xmovetween and ymovetween as per percentage loaded.As in, within this final boundary limit of the tween, I want, for example, xscaletween, to scale only till 140 till percentage hits 50. Is this possible?? If not is there a workaround?Or do I have to use new tweens within each percentage limit?
how to create a motion blur during a tween?
I dont have any examples now, but you know when you tween a movieclip across the stage (changing its x and y properites) and then according to speed of a movieclip a blur effect is applied?
how do i create ascripted rollover blur tween for all inactive buttons??
i got this script: "ziel_mc" is the button blurring on rollover. it works!!! but how do i add more than this one mc?? z.b. ziel_mc1, ziel_mc2, etc.
is there any way to add more mcs, separated by commas or anyhow??
Code:
stop()
import flash.filters.BlurFilter;
import mx.transitions.Tween;
import mx.transitions.easing.*;
[Code].....
Just wondering if blurX and blurY works with the classes lee was talking about in the tweener movie? (the caurina classes) If not how can I get a nice blur effect on my tween objects?
View 11 RepliesWhen I try to create a tween for the blur, so it will blur into focus, the tween just wont work. I go to frame 130, keyframe, add blur filter, create clasic tween. But when i go to frame 131 it instantly pops into focus instead of going along the tween time span to blur in gradually(I have the next keyframe at 160).
View 3 RepliesIn this game I dynamically load 9 random pictures onto the stage. They all start off with maximum blur. The idea is that when the user hears a sentence the pictures gradually lose their blur. The sooner the correct picture is clicked on, the higher the score. My problem is, I can't stop the tween when the user clicks on a picture. I've tried it successfully on a much simpler fla, where the images are already on the stage and not loaded from an external source.
Here's my extracted code - the source fla is way too long to attach.
Actionscript Code:
import mx.transitions.Tween;
import mx.transitions.easing.Strong;
import flash.filters.*;
import mx.controls.Loader;
var totalBlur:Number = 100;//100 is maximum blur,
[Code] .....
How to create motion blur which would be realistic at an angle? Applying simple blur filter looks fine if an object is moving vertically or horizontally but if its moving at an angle, its no good...
View 4 RepliesI have a white box on a grey background.When the movieclip starts, it fades in with a Transition.[code]...
The thing is: I want to fade it back out right after it's done. I've tried looking this up, but there's on documentation to be found on it. Is there an event that is triggered, or do I need to set it myself?
I was just out and about looking for a tween class to rotate an image and I came across "Transition manage"
[Code]....
trouble is, the transitionManager doesn't work... flash just asks me "what is transition manage!? - I'm assuming I followed a bizarre walk through because I've never heard of transition manager? Also "rotation" or .rotate isn't a property for the tween class to be able to change? What am I doing wrong?
Code:
import mx.transitions.Tween;
#include "mc_tween2.as"
MovieClip.prototype.checkMe = function() {[code]....
the mc_bg is my little bg on stage which on btn press it resizes, the resize tween works great however the btn_mc4 on release doesn't bring my mc_bg back to 100% am I missing something?
I have my site set up so each page is its own movieclip, and when my buttons get clicked, they tween alpha out from the current page and then tween alpha in to the desired page.This works most of the time, but I do get those odd occurrences where the tween (whether it be from fade in or fade out) just stops - leaving the page with a half alpha.I've tried everything from renaming my variables in my functions to making them the same names, and to no avail.
CODE
var currentPage:MovieClip = index;
var nextPage:MovieClip;
[code]....
I have my site set up so each page is its own movieclip, and when my buttons get clicked, they tween alpha out from the current page and then tween alpha in to the desired page.
This works most of the time, but I do get those odd occurrences where the tween (whether it be from fade in or fade out) just stops - leaving the page with a half alpha.
I've tried everything from renaming my variables in my functions to making them the same names, and to no avail.[code]...
So I can tween shapes and such for their colours, but when I try to colour tween text, it won't work. I've tried various things, motion tween, shape tween, making them movie clips, making them graphics, ect. How do I make text tween between colours to get a nice smooth transition?
View 2 RepliesI started creating a site using the Smooth Transition tutorial and came upon a problem and would like to ask for some advice. I was able to go through the tutorial without any problems. I than moved my button(s) to an external swf file that gets called. No problem here as well, i just added a _root. to a few places.
Now in this swf, I have a mc and in this mc i placed the button but it stopped working. I didn't think the path would be any different but I was wrong. Here is the current AS I have with the button in the external swf's main timeline:
[Code]...
I'm looking for an AS solution to creating an elastic screen transition. I want the screen to stretch and snap into position, before loading the contents
View 5 Repliesim having trouble figuring out how to script a tween in AS3 with multiple properties. I have the single property syntax down, like such, import fl.transitions.Tween;import fl.transitions.TweenEvent;import fl.transitions.easing.*;var name:Tween = new Tween( gar, "x", Regular.easeInOut, 60, 300 , 3, true);
but if I want multiple properties, im having trouble finding that info.
I'm trying to find all the class properties for the tween class. I know of:
[Code]....
are there more? Is there a listing somewhere on the web that has this information?
I am developing a webpage in AS3 and I made a simple example for you to understand: [URL]. The pink is a movieclip button and the blue a movieclip with a tween when I push the button I want to move the tween but instead I get the error:
TypeError: Error #1010: A term is undefined and has no properties.
at error_fla::Symbol2_2/onclick()
Is there no way to do this from the timeline? I have a layer on the timeline with a MovieClip. It's set for motion tweening. On Frame 30 it has a keyframe for all tween properties ( rotation, scale, position, etc ).I want to copy those and set them on frame 1 using the Timeline editor.
View 3 RepliesI am looking for some help on a specific effect. I was pretty good in the old days in flash but I have fallen behind badly and the new action script and such is making my head spin a bit. The effect I am looking to do is like the FETblur,first one on the page, [URL]...
View 1 RepliesBack in the day (AS2), I used to create what I called an"ivar" property that collected the index of a series of buttonsthat were clickable (see attached code). Imagine 10 buttons on thestage with names (selectButton0, selectButton1, ...selectButton9).The code under the //----------BUTTONS header would make a propertyof the button that was clicked, call it "ivar" and then send it upto a function that would use it as an index to then load theappropriate content with MovieClipLoader (remember that Class?).I have tried something similar in AS3 without any luck sincethe whole button thing is now steered by events. Does anybody knowan elegant solution that would achieve a similar result. That is,click a button called "selectButton0" and have returned the zero asan index variable that could be used further?
View 14 RepliesI am trying to create 6 TextFields with a loop which I have done but I can't seem to figure out the right syntax for setting the properties such as font, size, etc. in the loop. Here is my basic code:
var Tiles:Array = new Array();for (var i:Number = 1; i< 7; i++){Titles[i] = new TextField();
Titles[i].TextFormat.size = 17;}addChild(Titles[f]);}
I'm new to AS3. Learning how to create classes. Is comp = new HouseObjects creating a new class? Is comp creating an instance of the HouseObjects? I realize that this is inside public class TreeHouse. I'm thinking that HouseObjects, how I set it up is not a class...not sure what the correct way to set up classes and properties.
Also I noticed, that when I tried to link another movieclip using the same linkage name HouseObjects--it asked to enter a unique class. I'm trying to create multiple instances from the same class called HouseObjects.
[Code]...
I have a class which at the moment is quite messy/repetitive:
public class AvFramework extends Object
{
// vars
[code].....
How do I add motion blur to a motion tween?
View 2 RepliesI want to create a tween from 2D to 3D
say I have a rectangle, (150x100 at 0,0,0) I want to create a tween where it goes from 2D into 3D
say (3D center point 0,50,0 3D Rotation 0,-45,0)
simple to create using Timeline, tween, can't figure the actionscript3 though.I do not know how to set the 3D center point or 3D Rotation using tween or tweener etc.This is a simple example but once I have the answer I can use it in a more complex environment.
