ActionScript 3.0 :: [CS4] Dynamically Loads External Swfs When Click The Menu Buttons
Dec 18, 2009
I am currently doing a project that to create a full flash website. The website contains a preloader, an introduction movie, and dynamically loads external swfs when click the menu buttons. I am struggling with the preloader part. My preloader movie does not shown until 50% and disappears at 90%. I have searched for solutions on the internet for days but could not find any. I attached my source file as well as the swf.
I am using a main .swf with buttons on a navigation menu that loads external .swf(s) - these load external videos (I use them as their backgrounds).In the main .FLA I have used the following code (in the first and unique frame):
CODE
var Xpos:Number = 110;
var Ypos:Number = 180;
var swf:MovieClip;
var loader:Loader = new Loader(); var defaultSWF:URLRequest = new URLRequest("swfs/eyesClosed.swf");[code].....

I can make each button on the menu load each external .swf correctly with videos included - but when I leave that .swf using the navigation buttons to go to another section, the video and audio keep working in the background.
if you open up the TEST.swf you can see how I want my transition to look like.. everything works perfectly.. then if you open the Load.swf and click one of those red buttons.. it loads up the external swf.. but if you click another button it loads up the same external thing.the difference between Load.swf and TEST.swf is that in Load.swf is container in which the TEST.swf is loaded..
I am loading swfs into a movie clip. However, the contact button is not a loaded swf any longer. It's in the main flash page. This is what I want to do. All the buttons load the external swfs except when I click on the contact button that is in the main flash page. I need to get the other buttons to load after I click the contact flash button. Below is the code for the contact button and the one under for one of the other buttons.
I have a main fla file which loads an external swf into an empty movieclip on the main timeline which works fine but I want a button in the external swf to load another external swf into another empty movie clip on the main timeline.eg. start.swf loads UKEIAMap.swf into (empty movie clip within start.swf) MapLoader_mc then a button havant_b within UKEIAMap.swf needs to load HavantProjectSheet.swf into (empty movie clip within start.swf) ProjectSheetLoader_mc without unloading UKEIAMap.swf
I've got an SWF that'll be viewed via a webpage, that loads a choice of 7 different web pages/SWFs depending on buttons clicked.The problem is these files are quite big and take a good few seconds to load each, so for each SWF, I created a progress bar on frame 1, that then loads frame 2 (where all the code and content is) once it's ready. The code I used is as follows:[code]The problem is as you can see from is that it takes ages to load the loader! So I end up with a blankurl... screen then the loading bar, then the content. Making the loading screen pretty useless!
I've just recently started learning actionscript with most of knowledge coming from this site and others like it. My website loads external swfs by clicking a button. In these swfs is dynamic text and a slideshow. It load the text and images from an xml file. As you click around the website the slideshow stops working properly. I'm not really sure why this happening.
On a menu I have various school subjects. I have a separate movie for each subject. When you click a subject on the menu; a coresponding movie loads on the stage.
The actionscripting is quite simple:
on (release) { loadMovie("Art.swf", "_root.Facilities"); }
Yet however I try I can't get the swf to load .
I realise I need to configure the target so the swf loads in the right place but I'm unsure if this is the problem.
I'm creating a site that loads external .swfs as pages. I have little understanding of how Loaders and instance names work with AS3 (even after reading the documentation), so I'm having some difficulties.
I'm loading the .swfs in a movie clip named "container." I want to replace the contents of "container" with the web page .swf that the user chooses, but I don't know how to write the condition to: a) check to see if something is already inside "container"b) remove the contents by instance name or method of MovieClip. I'd prefer to remove whatever is inside of "container" rather than switching cases for different instances.
When the page loads, the first menu button (PORTFOLIO) is automatically OnClick. I want the user to be able to rollover it and click it when the page loads. I attached my file.
I am creating a navigation bar in Flash (which will then be used in Dreamweaver). When you mouse over each topic in menu (ex. Products), i want it play a movie clip (so it shoots out a sub-menu underneath). so far so good, but the only thing is, the sub-menu won't stay open in order for me to click on buttons in it. For each button, I assigned it the Behavior to go to a url. Also, I tested the buttons within the mc and they don't seem to direct me to url. do you think maybe it's because it's nested within the movie clip?? Is there an easier way to go about this?
I've got this interactive poem I've been working on for a class. I've basically finished each "episode" seperately. I made a parent document which essentially loads one of the ten child documents onto the respective key frame. Here's a sample of the code for the first key frame of the parent document:
Well Two things are messed up about it, well my "ChildTimeline2" variable will off and on assosciate itslef not with the main time line of a child document, but of a nested symbol inside said child document. Even worse, the "gotoAndStop();" command I will give sometimes applies to Parent document... yaay! but often it will apply to the child document. The end result being this horrible looping moment where you are stuck in one child document for all time.
I wish I could attach the documents but they exceed the 300KB. how I can get Actionscript to listen fro the last frame of the maintimeline of the child document, or tell flash to gotoandStop for the parent document
I am loading an external SWF file on button click, however, when the external SWF loads, it covers the buttons..how I can keep the buttons on top? I even tried lading the External SWF into a Movie clip and putting the buttons on a layer above it - and it doesn't work...
Here's my code:
// Array of external clips to use. Variable index refers to next clip to be displayed.var clips:Array = ["page1.swf", "page2.swf", "page3.swf"];var index:int = 0;
I am loading an external SWF file on button click, however, when the external SWF loads, it covers the buttons. How I can keep the buttons on top? I even tried lading the External SWF into a Movie clip and putting the buttons on a layer above it - and it doesn't work.
This is my code: // Array of external clips to use. Variable index refers to next clip to be displayed. var clips:Array = ["page1.swf", "page2.swf", "page3.swf"]; var index:int = 0; // Stuff to load swf files var thisLoader:Loader = new Loader(); [Code] .....
- Flash CS4 Actionscript 2.0 internal training project- Main movie is a single frame project, containing just the interface. This includes a menu listing 80+ individual "chapters" for the training series.- Each "chapter" is its own project/swf. Once the main interface loads, it should begin to play the chapters sequentially without the user selecting anything from the menu. When one chapter finishes, the next should load. If the user DOES select a chapter in the menu, it should load that SWF, and continue auto-playing from that selection forward.- Each chapter has a built-in play/rewind/ff bar, various movie clips with animations, dialogue audio track and a fairly lengthy embedded FLV movie, and therefore a preloader before each chapter is mandatory.What I have so far works, but it's embarrassingly crafted:- First frame of main movie (let's call this main.fla) contains the following code (most of this code was taken from an online tutorial):
var slideName = "modules/intro.swf"; var loader:MovieClipLoader = new MovieClipLoader(); loader.addListener(this);
currently, I have a XML menu. I followed the tutorial from here: [URL]. It needs more work and tweaking, but that's for later. The menu.swf is from an external SWF and it's loaded into my index.swf using the loader.My question is how can I have the menu load different external SWFs, in other words, different part of the website. Do I create another loader in the index.swf for loading the website's content? Can I use the existing XML file for the loading the SWFs?
currently, I have a XML menu. I followed the tutorial from here: http://tutorials.flashmymind.com/200...-menu-via-xml/. It needs more work and tweaking, but that's for later. The menu.swf is from an external SWF and it's loaded into my index.swf using the loader.
how can I have the menu load different external SWFs, in other words, different part of the website. Do I create another loader in the index.swf for loading the website's content? Can I use the existing XML file for the loading the SWFs?Here are the codes I have so far:
Index.swf
Code: import flash.display.*; import flash.net.URLRequest; var menuldr:Loader = new Loader();
I'm building a project that dynamically loads external images and audio into it.The images in the external folder are numbered sequentially in the order they display as you click through them (1.jpg, 2.jpg, 3.jpg, etc). No problem.There is audio that is supposed to fade in a play with certain images. (1.mp3 fades in when 1.jpg is displayed.). No problem.Here's where it gets tricky... At least for me.Not every jpg has an audio file associated with it. The last audio that was triggered needs to keep playing until another jpg with cooresponding audio file plays, at which point the two audio files need to smoothly crossfade.1.jpg displayed => 1.mp3 fades in and plays.
I am am loading external SWF files into main file from XML created menu.I want to make TRANSITIONS between loaded files, but this Kiripa tutorial does not work for me since I can not give each button sepparate code. All buttons come from xml.
At the moment If I do all by tutorial all menu buttons start to load same link which and transition works, but yeah I need menu to understand that it must load new swf not that same.I know it is possible, but I do not know how it is made, so if anyone could help me I would be very happy!
Now comes code that needs to be modified :
if (_root.currMovie == undefined) { _root.currMovie = _root.link[this.i].attributes.url; _root.Konteiner.loadMovie(link[this.i].attributes.url, "_blank"); } else if (_root.currMovie != link[this.i].attributes.url, "_blank" ) {
I found some handy script on xml flash menu, in which I've modified the code to how I would like everything to look and behave. Only, because I am new to this business of not having anything on the timeline, I do not know how to set the menu buttons as links to external swfs. I would like the buttons (menu items) to load an external swf into a holder on click. Then I would like the menu to collapse as it does when another main menu is clicked.
ive followed Senoculars drop-down menu tute [URL], awsome stuff, but it seems the submenu's dont disappear to well when you roll out. ..They only disappear if you click on another menu item or when you click outside the menu.
I am doing a menu bar in flash and have created a button rollover effect in a movie clip and applied actionscript. The problem is that the rollover effect jars the movie clip from playing and the click option is tempremental and works occasionally.
Flash CS4 Actionscript 2.0 internal training project Main movie is a single frame project, containing just the interface. This includes a menu listing 80+ individual "chapters" for the training series. Each "chapter" that loads is its own project/swf of varying lengths. Once the main interface loads, it should automatically begin to play the chapters sequentially without the user selecting anything from the menu. When one chapter finishes, the next should load. If the user DOES select a chapter in the menu, it should load that SWF, and continue auto-playing from that selection forward.
- Each chapter swf has a built-in play/rewind/ff bar, various movie clips with animations, dialogue audio track and a fairly lengthy embedded FLV movie, and therefore a preloader before each chapter is mandatory.What I have so far works, but it's embarrassingly crafted my lack of AS skills:- First frame of main interface movie (let's call this main.fla) contains the following code:
var slideName = "modules/00.swf"; var loader:MovieClipLoader = new MovieClipLoader(); loader.addListener(this);
I have just completed the "Transitions Between External SWFs" tutorial and I'm now I'm at the stage of altering a few things in there to suit my needs. But I've run into a problem... For my buttons, instead of "Button" symbols, I want to use "Movie Clip" symbols - reason being is that I've got some specially animated Movie Clip buttons that I wish to use.
To get this... err "working"... with my Movie Clip buttons I have needed to use "_root." when referencing to the container Movie Clip. Now that works to an extent, but for some reason each button plays only "red.swf" even when there is no mention of it in the ActionScript and is instructed to play "blue" for example ("red.swf" happens to be the first appearing movie). Normal method with Button - works fine!
Code: on (release) { if (_root.currMovie == undefined) { _root.currMovie = "red"; container.loadMovie(" [Code] .....
and I have this swf file with cms that I'd like for this menu to load. Currently the swf file load external text using this code:
Code: if (contenturl1 ne "") { loadVariablesNum(contenturl1 + "/" + userid + "/content.txt", 0);[code].....
but when the xml menu loads this swf file its structure loads but not its data.I tried using :
Code: this._lockroot = true;
in the loading swf main time line but it did not work.I should also mention that the dynamic data that loads onto the swf that is to be loaded by the menu, resides not in it main time line but 4 movie clips deep .I don't know if that makes a difference or not.
I have created a website which loads external swfs as pages onto the main stage on the click of a button. I am using Flash CS3 and Actionscript 3.0. Here is my code:
Is it possible to control a movie clip in an externally loaded swf from a button in your main swf? I have 4 buttons in my main swf. In the externally loaded swf there are 4 movie clips all with their alha set to 0. What i'm trying to do is when the user clicks button 1, movie clip 1 one the external swf changes its alpha to 1. Then if you press button 2, movie clip 1's alpha returns to 0 and movie clip to 2's alpha changes to 1.
The, buttons need to be in the main swf as there are over 20 externally loaded swf all with 4 movie clips and I cant make those four buttons in each swf and also, the 4 buttons are intergrated into the graphics on the moan swf.
I can handle animation but am somehow ignorant about ActionScript as my knowledge of Flash goes back to the Tell target actions...I've been playing around with 2 tutorials I've found on Kirupa (see links below) in order to build a text based navigation:
My first level is made of MC buttons. All working great when adding the script indicated in the first tutorial. From there, I would like to be able to load external SWFs when clicking on one of those first level buttons and in order to do so I added the script from the second tutorial (Transitions Between External SWFs)
Doing so, I was told I could only add that script on button symbols which is unfortunately i not an option at this point. how can I launch external SWFs that would allow transitions from those MC symbols?
