I have a dynamic text box. It has x, y width, and height all set. I have scrollbars built for it. They work great. Now, I just need those scrollbars to be conditional. And it's not so obvious to me how to do that. If I have a fixed height already set, I can't just say if the height is greater than this. If I set the autoSize then it goes with the autosize regardless of what I do.
View 1 RepliesI have a dynamic text box which gets populated depending on the value of a variable. However I am getting errors with my code. Here is my code.
Code:
story_txt.text=
if(percent<51) {
"Below 50";
} else if(percent>50) {
"Above 50";
};
The errors get are:
1084: Syntax error: expecting identifier before if.
1084: Syntax error: expecting rightbrace before leftbrace.
How do you change the html scrollbar (the one that you see in the far right of your browser) with your own images? I know it's possible because i've seen it before.
P.S.: I am aware of and I know how to change the color of the scrollbar. That is not what's expected. Also i think it's made possible by Javascript.
I have an application that has a dynamic text area that pulls in XML content and i would like to have the text area grow, rather than use a scrollbar and i am wondering if anyone has done this or can point me in the right direction? I have dont quite a few searches and only find examples on how to do this in AS3, and i am using AS2 and CS3.
View 5 RepliesThis is about a self assessment quiz.There will be four options and each one has a scale from1-5 i.e., "option a" has 1mark, "option b" has 2marks,"option c" has 3 marks, "option d" has 4marks and "option e" has 5 marks and we count the answered and we display the score for example if there are 20 question in it if they answered "option e" 5 times the score will be 25 and option d 5 times the score will be 20, and if "option c" for 5 times the score will be 15,and "option b" for 3 times the score will be 6 and "option a" two times the score will be 2, and we add up all the score and display in a dynamic text field called "score" and the total score is 68.
And I have another dynamic text field called "tsc" where I have to display the tags like excellent , good, better ......etc. Till now every thing is fine but I am unable to compare them it is displaying excellent even if i get 10 marks. If the score is greater than 55 "tsc" should display Excellent, if the score is greater than 41 or less than 55 "tsc" should display Best, if the score is greater than 26 or less than 40 "tsc" should display Better,if the score is none of the above "tsc" should display Poor.
This is my code on the submit button:
on (release) {
gotoAndStop("sQ");
if (scor>=55) {
tsc = "Excellent";
} else if (scor == 41 && scor<=55) {
[Code] .....
Where:"sQ" is the frame name where i am displaying the score details"scor" is the var name for the dynamic text field for displaying total score"tsc" is the var name for the dynamic text field for displaying the tags llike good, Excellent, better, poor.....etc.
I have a dynamic text box (called navgxchangeBox below) that is being fed by an xml file.Depending on the output (weather positive or negetive) I'd like the text to display green (for pos) or red (for neg). I know I need to write a if conditional statement but not sure if it is correct. The text is displaying in color, but I don't think the condition loop is executing. Can anyone look at my code below and tell me what I am doing wrong?
ActionScript Code:
//
var myXML = new XML();
[code].....
I've been working with Flash for over 3 years, but I can't figure this one out. I've got a body of text, half of which are bulleted points designated by <li></li>. It's loaded into a html-ised dynamic textbox.
[Code]....
It displays fine as is. However, if I make the box selectable, and select any part of the bulleted list, the ENTIRE body of text turns into a giant bulleted list, including the non-bulleted portion at the beginning. I've managed to replicate this bug with Flash 8 and CS3, using a variety of flas made from scratch.
How do I write the PHP server script to get the text which is in a Dynamic Textbox?
PHP Code:
<?PHP $to = mail@mail.net; $subject = "SUBJECT SUBJECT"; $headers = "From:" .$email."
"; $headers .= "Bcc: $email
"; $message = "Name: " . $thename; $message .= "
Address: " . $theaddress;$sentOk = mail("$to",$subject,$message,$headers); echo "sentOk=" . $sentOk;
I have created a text box and a format
var redformat:TextFormat = new TextFormat();
redformat.color = 0xFF0000;
redformat.bold=true;
[code]......
What I'm after is either loading an asp page with variables or connecting to an SQL database in order to pull out some values to display in a flash movie. When we have is a daily food menu, which I want to display in flash using a dynamic text box. Looking around on the internet, I believe that I can either pull it from the SQL database, or load an ASP page and pull the variables from there.
View 8 RepliesI have a sort of login, where you enter four digits, if correct you go to another frame. If incorrect you'll have an mc displayed. Easy stuff. Now I have a keypad where you punch the numbers in, and they display inside a dynamic textbox. I have a clearkey mc that I'd like to have operational. My initial thoughts were to use atm.textfield.text == "" that way it'd clear it. Nope, no luck. Any ideas on how to reset a dynamic textbox to blank?
View 6 RepliesFor my problem, i using 5 random generated number and display it in a dynamic textbox, then i computed the 5 number using a formula and put the result in another dynamic textbox (name it as text_string). Then i create a button that function as to read the value in the text_string text box, for example, if the number is 5 then gotosomewhere, else terminated. Therefore, no matter what the result is the flash still terminated, it seems that the button unable to read the value in the text_string text box.
This is my code:
var newNumber:Number = Math.floor(Math.random()*3+2);
var newNumber2:Number = Math.floor(Math.random()*3+2);
[code].....
I have a dynamic multiline text box txt1(instence Name) which get the data form xml file.
i have other two textboxes instence Name txt2 and txt3 i want that the first line (only first line) show in the txt2 and rest of the contents in txt1 show in the txt3.
I am trying to load data from an XML file to a dynamic textbox but only on a certain condition. I have tried both switch cases and if statements but they do not seem to work. When I play my SWF file WITHOUT using an if statement or switch case and just use:
my_xml = new XML();
my_xml.load("filmTimes.xml");
my_xml.onLoad = my_function;
[code]....
everything works fine. But when I place an if statement around it (if (day.text == "Sunday") ) then nothing happens at all and no syntax errors occurr either.
OK, I have my php and MySQL working fine. I'm pulling the data. I found how to format the data that is returned in the php as XML. My problem is I can't get my Flash textbox to load the variable from the php file. Like most things, this is probably very easy if you know how.My flash dynamic textbox is given the variable name topTeacher. From what I understand, I don't need to worry about an instance name.My php file looks like this:
<?php
$con = mysql_connect("localhost", "USERNAME", "PASSWORD") or die('Could not connect to server');
How do I create a dynamic textbox using as2?And how do I change its properties?
View 1 Repliesquick way to check a dynamic textbox to see if it has text is there a function to do it?
View 4 RepliesRight now I'm us Flash CS4 and creating a flash program in AS3. After a certain frame the dynamic text boxes that I have set up refuse to display text when required. I've gone over every line of code and every possible set up and I can't understand why it will not work. I've made sure all the dynamic text boxes have the instance names properly in place naming them all "talkBox". I've made sure all the code is written properly talkBox.text = "Insert Text Here!" There should be absolutely no reason in the world why the dynamic text boxes shouldn't be working.
View 1 RepliesMy goal is making a navigation section that is a scrollable box. I thought the easiest solution was to make a dynamic text box and put a scroll bar on it. Worked until it came time to make the links. It is only letting me make one link for all the text. Also I think I want more control for the mouseover look.
View 3 RepliesI'm using Flash CS5, and dcepending on what the user does, I'm changing the font in a dynamic text box using
gFormula = "Na<font face='GG Superscript Sans'>+</font>"
txt_Names.htmlText = gFormula
The correct font appears on the computer where the font is installed but not on other computers, so I assume that it is a font embedding problem. I have embedded the font.
I have a dynamic textbox which is being assigned a variable. The textbox is set to render as HTML and all fonts are loaded.The following variables appear fine in my textbox:
varText = "This is <b>bold</b>";
varText ="Two is > One.";
but this one
[code]....
I have four input text boxes that I want a user to enter numbers. I have their instance names provided on the textbox itself, but nothing declared in the AS. I have one total box as a dynamic, with the name totalbox. If i wanted to have the total box display the sum of all numbers from the input boxes, how would one go about this. I've seem formulas around, just not sure how to get the numbers to actually show up in the dynamic total box.
View 6 Repliesok in theory this sounds brutally easy. Just can't make it fire. On my stage I have an atm movieclip called "atm". In it I have 8 buttons l1-l4 and r1-r4. I add and remove functions based upon what is on the screen. So on the third screen I want when I hit l1 for a dynamic text box to display "20". So my thought is, place the dynamic textbox where I need it, create the instance name, and where it needs to come up use this line of code:
cashdispense.text == "20";
well the box remains blank. I've posted all my code if it makes things easier to understand.
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;[code].........
This should be really simple, but for some reason Flash just isn't operating as I expected.I'm trying to make a keypad for a game, whereby the player must type in the correct number sequence to progress. The player will click the number buttons with the mouse and the numbers will be put into an array, which will then be checked with a confirm button.I have set up the array as follows on the main timeline (it needs to be empty until user presses a number button):
ActionScript Code:
keypadnumbers = [];
Each number button then contains a variant of the following code (numbers differ):
[code]......
I'm having trouble displaying a dynamic textbox once I apply a masking layer over it.Basically, i'm running the following code on the textbox:txt1. text = "" + myXML.quote[MovieClip(this.root).counter]This is stored in a layer on the timeline called "txt". It runs fine, displays the text without an issue.What I want to do is mask this layer though, and for some reason, once I mask it partially, nothing at all will display in the text box.Can I refer to the textbox differently than txt1.text, so that the code will still find it and fill it fine?
View 3 RepliesIm trying to make a simple addition, like 2 plus 2 and send it to my dynamic box. I show u guys how im doing.
[Code]....
I am trying to load an external swf from a dynamic scrolling textbox?I manage to only to get it to work by loading it as an .html page, but I want it to load in the main page. I tried _parent, _self, and _top I see no difference in using any of them. All of them are making the swf load into a blank html page.
I am using the render as html option. Any ideas on how to make a pop-up window from a dynamic scrolling textbox?
I'm creating some sort of flash website template, and I made a standart button with a textbox on the top layer. The button is added via addChild, and the textbox within has the instance name of "pageName".
[Code]...
I've tried many other ways but nothing seems to work. I can find a lot of people experiancing the same problem, however they haven't solved it or haven't post a solution.
I would like to draw a line over a textbox. I can do this easily with the following code
ActionScript Code:
var line_text:Shape = new Shape();
addChild(line_text);
[code].....
I am trying to use a dynamic text box with HTML tags (<b><i><u>). I've tried loads of methods without success:
1. 3 dynamic textboxes placed on the stage with each font variant (bold,italic,regular), with embedding enabled for each. Then the main dynamic textbox with embedding turned off.
2. 3 font symbols with linkage enabled in the library. Then the main dynamic textbox with embedding turned off.
The font is not a system font btw. I have tried point 1 with Verdana and it worked. So is it an issue with a non system font with HTMl tags?