for example i have a two pages, in page 1 theres a sound thats playing, but if i will try and go to page 2 the sound will stop, but if i will go back to page 1 the sound will be played again..
View 4 RepliesI am having a problem with the video on my website. I put a couple of videos on there and I have them working. But if I click on another page, the sound is still playing on the video until it is over. I found a temporary solution by putting in the code to STOP ALL. This make it work how it should. But the thing is I want background music, and with the code I have know the music would shut off every time I go to another page. Is there any code where I could just shut the sound off for that video when I click on something else and not ALL sound?
View 8 RepliesI'm working on a pretty basic interactive children's book. I have it set up so that each page has audio relating to that specific page. Going forward, there is no issue with sound overlapping from the current and next pages. Going backward, however, there is an issue with sound playing on both the current and previous pages. How do I stop this?
Here is the script I'm using-
ActionScript Code:
stop();
import flash.events.MouseEvent;
[Code].....
the method for stopping/playing sound in 2.0 don't work for 3.0. i can stop the sound by going to a different page/frame on the site.but i want the buttons.
1. play button?
2.stop button?
3.mute button?
I added a website preloader in a separate scene to the main frame of my website and scripted it to go to and Play the main scene or frame of the website when finished loading. I then put a command in the first frame of the main scene for the movie to stop (); at that point. The problem is that now the buttons on the main page don't respond to any behaviour commands to go to and stop at other frames in the main scene. I'm not sure if this is a conflict between the stop(); command in the main scene and the button behaviour command to go to and stop at another frame or an error with the way I'm identifying the scene and frame.
View 5 RepliesThe website has buttons to navigate on each page. Each page has a sound. I tried the embed and external but when I click on a button to navigate to another page but the sound from the previous page is still there which overlaps on the next page's sound.
How can I make the music from the current page stop when going to the next page? I want the next page's sound to play and not have both sounds play at the same time.
I have tried whatever.stop();, SoundMixer, and everything in the Internet for the past 2 days and I still can't make something very basic as changing music work.
I'm building a site that has an mp3 player that's available all the time.I'm adding a video page to the site.The videos use an FLVPlayback component.When I leave the video page I want the sound that was playing on that video to stop.I can't use SoundMixer.stopAll() because if I had the mp3 player playing before I went to a page I want it to keep playing.
View 5 RepliesI need to allow users to preview audio files for purchasing. I have CF pages that return records form a SQL database. Each record contains the same swf file however, each swf file points to a different mp3 for previews of different audio examples. So far, everything is working fine. My problem is that I need to be able to stop the sound from one swf when I click to play a second swf .The only solutions I see in Flash forums deal with loaded swf files. These are not loaded files they are separate files within a page. The question is: How do control one swf from another swf in the same page.The following items have not worked: soundChannel.stop();,soundMixer.stopAll()
View 2 Repliesi'm trying to build a flash site and ran into a problem... i have a gallery page with a bunch of page numbers at the top. when you click on one, a movieclip loads of some images coming in.so the problem i'm having is that i made a little animation for when you roll the mouse over the page number (they scale up when the mouse is over, scale back when the cursor moves away)... what it's doing is when you roll over, it goes to a certain frame in the timeline and plays that animation.that's all working cool, but i need it to not do that once it's clicked on. so basically when you actually click on a page number, the over script should stop until you go to another page... here's the code i've written,
function over(event:MouseEvent):void {
this.gotoAndPlay(30);}
function out(event:MouseEvent):void {[code].....
I've got 3 buttons on a background and would like each to perform this:Rolllover=goto another frame to see graphic and stopRollout= go back to frame 1 and stopClick=goto URL
View 1 RepliesI have a php file that has three variables that are passed to a flash file. I know the variables are going through, as I can display them via input text elements.
one of the variables is called percent I want a movie clip called 'thermo' to go to the frame number that the variable 'percent' has stored. For whatever reason, this is not working
_root
loadVariables("scripts/membership_drive.php", "");
_root.thermo code on frame #1
stop();
gotoAndStop(_root.percent);
Like maybe the script does not see the variable percent as a number?
i have dynamic buttons in movieclip and i want the movieclip goto 2nd frame once some one click single movieclip while rest remains in 1st frame.the movieclips can be in arrayi have some code here:
Actionscript Code:
var mc:MovieClip = new MovieClip();for(var i:int = 0 ; i < numberOfButtons;i++){ var btn:MovieClip = new button();
[code]....
How do i use actionscript to make my button goto another page on my website?
View 4 RepliesHow its done?
on (release, keyPress "<Enter>") {
if (password eq "caleb") {
tellTarget ("_root") {
gotoAndStop("private");
}} else {
tellTarget ("_root") {
gotoAndStop("error");
}}
It contains syntax error.
In cs5.5, I have a frame with a movie clip on it. When a user clicks a button, I want the movie clip to stop and the user to be directed to another frame. It is correctly redirecting to a different frame, however, the movie clip is still on the stage and playing. How can I modify the following code to make it not just go to a different frame, but also stop the movie clip that is on that frame from playing?
btn_1.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame);
function fl_ClickToGoToAndStopAtFrame(event:MouseEvent):void {
gotoAndStop(10);
}
I have tried to get the advanced gallery to work and now it does but it does not disappear when you going to another scene. What should I write to get it to stop when you want to go to another scene and where should I write it? I used the tutorial on this site to get my gallery: [URL]
The code lookes like this, written in the first frame in a scene:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var myGalleryXML = new XML();
myGalleryXML.ignoreWhite = true;
myGalleryXML.load("gallery.xml");
myGalleryXML.onLoad = function() {
[Code] .....
I have searched, and maybe I am searching wrong.. but I cant seem to find the same situation I am looking for. I have a "Home" scene that if I can explain it right by listing the individual frames.... would play like this:
frames 1,2,3,4,5,6,7,8,9,10 (then stop automatically.... then after the "ART" button was clicked .. it would continue and play like so) 11,12,13,14,15 then at frame 20 it would go to the "ART" scene
I am sure most figured it out that I have an intro scene.. that essentially builds the page and finishes at frame 10. And when a button is pressed.. it would play my Transition (which is just the same frames copied and reversed) ... and then go to the desired scene. So far I have it stopping at frame 10, that works smoothly.. but I dont know where or how or what to do to make a certain button play to the end then to go a specific scene.
In Flash MX I have a movie clip that is 32 frames long and loops. Now, what I want to happen is: when you press a button in the file, the movie clip will stop at frame 22. I don't want it to "goto and stop", instead, I want it to continue playing through until it hits 22.
i.e. if you hit the button at frame 5 it will continue playing until 22. or if you hit it at 27 it plays through the cycle, but stops at 22 (if possible, it would be great if I could get it to reverse if it was past 22, but i don't want to be greedy).
Now, one way I thought of doing this was to have an "on open 'stop at 22' = false " and "on press button 'stop at 22' = true.
In Flash MX I have a movie clip that is 32 frames long and loops. Now, what I want to happen is: when you press a button in the file, the movie clip will stop at frame 22. I don't want it to "goto and stop", instead, I want it to continue playing through until it hits 22. i.e. if you hit the button at frame 5 it will continue playing until 22. or if you hit it at 27 it plays through the cycle, but stops at 22 (if possible, it would be great if I could get it to reverse if it was past 22, but i don't want to be greedy).Now, one way I thought of doing this was to have an "on open 'stop at 22' = false " and "on press button 'stop at 22' = true.but now we come to my problem, I haven't done scripting for the past several months, and obviously what I wrote above is not an accurate script,
View 4 RepliesI have recently purchased a XML based template and need to make an existing XML link goto an internal menu page. I have been able to create buttons in the flash template itself using action script with no problems. In my site I have several buttons that say more, so in the XML document it has these internal links, asfunction:_root.more_click_func,1. So what I am trying to do is have thiese links goto the contact page, so I assumed it was simple as directing the asfunction to the internal menu which is 6 but it doe snot work.
asfunction: "6"
asfunction: contact
i'm trying to do everything in flash vs is exporting the menu to dreamweaver, and i can seem to have the buttons go to a certain frame and stop? this is the action script i'm using in the dropdown menu mc to get the button to work because if i do it in the to level of the scene i get error saying can access button
news_btn.addEventListener(MouseEvent.MOUSE_DOWN, news)function news (event:MouseEvent):void { gotoAndStop(2)}
but the problem is if i put it in the dropdown menu mc then it just makes the button disappear and doesn't go to frame?
i am doing a simple project in which i have 2 frames in the main time line and a movieclip in the first frame and a button.i have something else in the second frame.when i click the button the movieclip should start after it ends the timeline should move to second frame and stop.
View 7 RepliesI have a bit of a problem with sound.. I have a main container animation with background sound that's loaded with soundChannel..I also have an externally loaded SWFs with Movie Clip buttons that have a sound ON ROLLOVER on the timeline..after rolling off - I place the:SoundMixer.stopAll();to stop the button from playing the sound once the mouse is rolled off.. However, the problem I'm running into is that it also stops the sound of the main container movie cli
View 1 RepliesWhen i zoom into the page then move around the edge of the page can be moved past the edge of the browser window showing the static page which appears at the start of the document. Is it possible to use actionscript to stop the page being dragged past a certain point so the static page is not seen? On the example below the static page is white so it does not pose too much of a problem however im using the static page as a sort of instruction page and it looks a bit rubbish if the user drags a page past the edge of the view window and see's the original page. Example below. [URL]
View 1 RepliesI've created a product registration form for my website and the basics of it work fine, ie when I click submit the info successfully gets e-mailed to me. I'd like to expand the functionality of it, however. As is, I get an e-mail regardless if any of the fields are filled in or not. I'd like for users to be directed to an error page when the e-mail field is blank and a thank you page otherwise. How would I do this? I imagine it can either be done directly in flash or would the php instruct the browser to navigate to the error or thank you page? Key is I don't want the form to be submitted if the email is blank.
[Code]...
i have programed a play button using:
[Code]...
now i am trying to program the stop button to allow the user to stop mid song....
I am using Flash CS5 on an iMAC, running OSX 10.6. I created a file that uses a Combobox on the first frame, and I would like to connect the buttons to go to and stop/play on multiple labels.
View 2 RepliesI am using FLASH CS3.I have gone through many posts, seems to be an issue with many people.Still haven't come across a fix.Website made in FLASH. Flash movie loads and sound works great!I have a button with 'StopAllSounds' action script.[code]When I go back to main page... sound starts up again.Is there a way I can stop all sound regardless of where the visitor goes on the website?
View 2 RepliesI'm sure this is a common problem, I tried looking around on the forum for a problem like mine but was unable to find anything. I'm using Flash CS3, Actionscript 2.0, and am making a soundboard. I have two scenes, one that's the title screen, of which has a sound file loaded via the timeline, (I think) set to Event and Loop, and a button which takes you to the next scene and makes a short sound when it's pressed. My second scene has background music as well, also set to Event and Loop.
Problem is that when I press the button, the background music keeps playing into the next scene. I tried using putting stopAllSounds onto the button, but that makes the sound of the button stop as well, and I'd really like to keep it. I've been messing with this for days, and I can't figure it out.
i want to make a single button to play a sound, and if pressed again, stop the sound. and if pressed again, play the sound, and so on...
i know it has to be made with a boolean variable, true/false, but i just can't figure out how.