ActionScript 3.0 :: CuePoints Using FLVPlayback In Projector Executable?
May 26, 2010
I have a Flash CS3 project that uses the FLVPlayBack component to play 5 FLV files. Each of the files has between 1 and 15 navigation CuePoints embedded in the video (MOV files encoded using Flash Encoder).
When I test the app using Ctrl-Enter from the IDE all works fine.
When I test the published projector EXE on the hard disk all works fine.
When I burn all the files to CD-ROM and start the projector EXE not all is fine.
When I click on one of my buttons that will navigate to the desired cuepoint within the FLV, it acts like it is unable to find the cuepoint and thus goes to the end of the FLV file.This is very annoying and I can not find anything listed anywhere. I suspect it has something to do with buffering or something because the CD-ROM is slower than the hard drive.When playing the video all I am doing is:
vidPlayer.stop();vidPlayer.source = "name of flv file";vidPlayer.play();
When I navigate to the cuepoint I am using the following:
vidPlayer.seekToNavCuePoint(cueName);
View 1 Replies
Similar Posts:
Jan 25, 2010
I've been trying to get cuepoints out of my flv video with the following code without success:
[Code].....
View 1 Replies
Nov 14, 2010
I have an FLVPlayback component on my timeline (frame 4 or so), and my Flash Projector is running in fullscreen mode. The problem is that I can't seem to make my FLVPlayback component NOT be in fullscreen mode and at the same time, have my stage in fullscreen mode.
View 1 Replies
Dec 8, 2009
Is it possible to have a flash Projector control the timeline of another flash Projector.
example: Projector1: has a button to start/play Projector1 and trigger to start/play frame 7 in Projector2 at the same time.
So both external projectors are in sync.
View 0 Replies
Aug 10, 2010
I have an object that when I use an flv with a CuePoint, it all works fine. When I changed the flv out with an f4v, also with a CuePoint, the code does not work.[code]
View 2 Replies
Aug 14, 2009
I'm creating a video player with closed captioning and navigation. Is it possible to as AS cuepoints to a video object and not a component.
Like this:
//Create video screen and position it
var vid:Video = new Video(320, 240);
vid.attachNetStream(ns);
[Code].....
View 2 Replies
Oct 22, 2009
First, I should mention that I haven't used Flash for years and I'm feeling a bit out of my depth.I've created an offline presentation for a client using ActionScript 2, authored with Flash CS3 (to run off a laptop).The presentation has an FLV (currently attached to the stage via the FLVPlayback component) which must play through it's entirety and at the end present 3 questions. Each question will present an answer once clicked. The user will then be presented with a "watch again" button which should restart the FLV from the beginning.
The second time the FLV plays back it should pause at 3 key points and present the user with questions and answers as before. Once the user has dealt with the Q&A's they should see a button to continue and the FLV should continue playing from where it was paused.I'm happy making the various interactive Q&A's, but have no experience of interacting with video. After a brief search in the web "cue points" look like the best tool for the job.
View 9 Replies
Mar 12, 2009
I am having an issue with setting CuePoints in a FLV that is not natively FLV. My code works on files that were exported directly from AfterEffects to .FLV. However, some of the video files I am working with are originally .MOV files. When I pass them through either Adobe or Flash Media Encoder, the CuePoints are not recognized. It seems very strange.
Here is the code, although the code works perfectly with native FLVs, so I don't think that is the problem. I'll put it on here just in case.
Code:
myFLVPlayBack.onRollOver = function () {
playHover.gotoAndPlay(2);
}
[Code].....
View 1 Replies
Dec 2, 2010
I had to add the cuepoints after setting the source.Iam trying to use cuePoints on a flvPlayer component but it wont work for me.I have a flvPlayer 2.5 in my timeline (vid_mc) and this code:[code]
View 1 Replies
Dec 14, 2010
I am having some issues creating reactions to CuePoints when using NetStream();. I can get what I want to work when the video is embedded directly onto the stage by using the following code:
vid.addEventListener(MetadataEvent.CUE_POINT, cp_listener);
function cp_listener(eventObject:MetadataEvent):void {
obj = eventObject.info.parameters;
for (key in obj) {
if (key == "CuePointName1") {
[Code] .....
The trace statement is returning the name of the CuePoint correctly, but 4 times like this:
CuePointName1
CuePointName1
CuePointName1
CuePointName1
Which I assume is why the if statement isn't picking it up.
View 3 Replies
Jun 29, 2010
I've just upgraded from CS3 to CS5 and have discovered an annoying issue with cue points. When I open an existing FLA that has a movie with actionscript cuepoints and try to replace it with another movie (an updated version), Flash drops all my cue points and I have to re-enter them. Is there some way to prevent this?
View 2 Replies
Jul 15, 2010
Im trying to get cuepoints working on an old as2 project.I have a netstream video component and want the cuepoints embedded in the FLV to trigger buttons to appear. I have embedded them as Event Cuepoints.
ns.onCuePoint = function(infoObject:Object){ trace(infoObject.name); if(infoObject.name == "CP1") { trace("yes working"); }};
[code]...
This shows all of the cuepoints within the FLV. I cant figure out how to change the code to trigger actions WHEN the FLV hits a Cuepoint.
View 2 Replies
Mar 9, 2007
My question deals with adding a cuepoint in actionscript 3 using code. In flash 8, I made use of the FLVplayback component which included a method addASCuePoint(). In Actionscript 3, I am now using the standard method of creating a video object, except i can't figure out how to use actionscript to add a cuepoint. In the AS3 LiveDocs entry for NetStream , it list only event and navigation as cuepoint types. Previously there was a third type of cuepoint: actionscript.
Code:
public function LoadVideo(){
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
var vid:Video = new Video(320, 240);
[Code] .....
I am guessing one option is to create an onEnterFrame function that compares the NetStream.time to each value in my cuepoint array, and then do a addEventListener(EventType.ENTER_FRAME, onEnterFrame); Although this might work it requires my application to loop through my cuepoint array every single frame, which isn't really efficient.
View 1 Replies
Sep 20, 2010
I used After Effects to create a flv file thats got multiple event cuepoints. When i try to use these cuepoints in Flash, it says :
[Code]...
81.88 is the first position where two Cuepoints are set on the same point of time. I named them 81.88a and 81.88b in After Effects but it wont make a difference. Each of these points has some important parameters (cornerpoint data) so that i need them all.
View 1 Replies
Jan 7, 2009
This is the first time I have used a FLV with cuepoints. I have a flv which loads into my swf which I have added cuepoints to on import. I have a series of buttons over the flv and when you rollover these you skip to various points in the flv. This works in principal but in reality it is a little slow, especially when it first loads. I am assuming this is because the FLV is still loading (although I am testing this locally and it will never be used on the web). If this is the case I think I need to make sure the entire flv is loaded before i show it. Secondly, is this the reason the rollover animations are slow to start or is this an inherent problem when using FLV? Is there anything else I can do to make it more responsive?
View 3 Replies
Apr 25, 2009
I am creating a custom video class and was wondering is anyone knows how to turn cue points embedded in an flv into a time in an array.
I have tried the following but, although it doesn't give me any errors, it simply rewinds 1 second rather than skipping back to the correct cuePoint. I can't figure out why? :
Code:
public var _durationArray:Array = new Array();
public function makeArray(info:Object):void {
for (var i:Number = 0; i < info.cuePoints.length; i++) {
[Code].....
This previous code is amongst other code, which makes does things. Then in a new class I call it inside a function (which triggers fine):
Code:
_vidStream.seek(_durationArray[0].time);
View 1 Replies
May 24, 2010
I have the following XML file structure:
Code:
<VideoData>
<CuePoints>[code]....
And I am trying to create a function which will search the cuepoints for a specific time, I'd also like the function to be re-useable, so I could just feed it a xml tree path and a search term then it would return a reference to the matching node.So far I have only managed to return what is in the node:
Code:
public class Search
{
public static var returnData:Array = new Array();[code].....
View 2 Replies
Jun 1, 2011
I would like to add a .exe file to flash.Example.Goto flash website click on tech support and fire remote access.exe.Is this possible.
View 4 Replies
Sep 17, 2010
Im doing live streaming directly from webcam like Ustream.TV. Im using Flash Media Server 3.5, and I record cuepoints of broadcaster with the method ns = new NetStream(); ns.send('functionName' , 'value'); I publish the content and record it in a .flv file. However when I download this FLV file and extract the metadata with tools like FLVTOOL2, or FLVMETA, the cuepoints that I recorded with ns.send() method doesn`t show. I know they are there since when I play the FLV file in another client, I can receive the calls for the 'functionName' in the exact time that I call while recording. What I`m doing wrong? I would like to encode recorded video with Flash Media Encoder and insert into it CuePoints that can call to the same function that I do with live streaming. To do that, first I need to know how the CuePoints are created and fixed into the FLV file that I record directly from webcam. I need to know how they are stored to do it manually in Flash Media Encoder.
View 19 Replies
May 31, 2011
I don't know much about this, since I have always just used FDT, FB etc. directly to compile under Win or MacOS.
Alternatively to an Android port, I understand there is (?) a version for Linux, but would this work under Android?
View 1 Replies
Dec 7, 2006
I have created an executable file from a flash movie and am wondering if it is possible to center the movie on the desktop when it autoruns.
View 1 Replies
Sep 9, 2008
I'm sure this is relatively simple but i'd like the correct process.I have a flash file that i am exporting to and exe, i'd like that exe to launch full screen instead of windowed when the end user double clicks it.How can I make this happen?
View 1 Replies
Nov 3, 2010
I'm building an application where an administrator can choose which videos they want to include in a package and then they would build that package (executable) which they can then disseminate how they see fit.
I guess my question is: Is it even possible to have an AIR application build/create other executable files and if so, would one of you be so kind as to point in the right direction as to where to start?
View 1 Replies
Aug 10, 2004
i have different swf files which i want to invoke it internally.so what parameters should i pass so it makes my movie executable?
View 2 Replies
Apr 27, 2010
I have attached a video on a frame of my website in Flash. When I preview the movie the film plays as it should.But when I export the Fla. as a Swf. file it then doesn't have the movie there anymore?It does show this error:
**Warning** The linkage identifier 'FLVPlayback' was already assigned to the symbol 'Video/FLVPlayback', and cannot be assigned to the symbol 'FLVPlayback', since linkage identifiers must be unique.
I really don't know what that refers too.
View 1 Replies
Apr 12, 2011
I'm using InDesign to create an interactive SWF of a document.
For normal Flash projects, I can create an executable (*.exe) file that includes the Flash codec so that the viewer doesn't need to install Flash beforehand.
Can I create something similar for the SWF file created by InDesign?
I'm using CS5 Design Premium. Intermediate knowledge in InDesign, basic in Flash, will likely need clear steps.
View 2 Replies
Dec 7, 2011
Flash executable Presentation will work in Mac OS..? or the executable Presentations only for windows platform..?
View 2 Replies
Aug 14, 2009
is there any way to execute C language executable file from Flex?
View 2 Replies
Dec 3, 2010
I have a Windows app written in C++ and I need to detect if Flash is installed for IE. What's the best way to do this?
View 2 Replies
Apr 21, 2011
How to merge flash site into one executable.
Site consists of:
index.html
images
sounds
pdfs
etc.
After clicking on a merged file, index.html is needed to be opened. Adobe AIR might be useful for this, but I can only create setup executable, maybe it is possible to create just executable?
View 2 Replies
