ActionScript 3.0 :: External SWF Scaling To Objects Outside Of Stage?
Dec 24, 2009
I have an swf in which objects go outside the boundaries of the stage (but are properly masked). Whenever I externally load this swf into a container it scales down to fit in the objects located off stage. EX:I have tried removing the objects outside the boundaries and the stage does not shrink the image. The container is the same dimensions as the external swf.
Code:
function open_puzzle(openSWF:String)
{
//Load SWF
container = new MovieClip();
[code]....
View 1 Replies
Similar Posts:
Oct 19, 2011
I'm writing a web based flash app that's written entirely in AS3. I have objects on the screen as part of a GUI. I would like the user to be able to resize the window, or make it full screen. I would like everything to auto-scale with the resize, but also remain in the same relative position on the stage.
View 1 Replies
Feb 23, 2011
i am looking for class or something to proportional outside scaling of stage and all included objects (internal or external).I know SWFfit and LiquidStage. I have got many problems with integrating SFWfit to my code (resizing is not affected to included objects). LiquidStage seems to be ok but it`s not freeware . I am looking for free possibilities to do it.I am trying to connect that with GAIA framework.
View 3 Replies
Jan 8, 2012
All though I can scale down the size of my objects and can shift them to their correct positions when scaling. I cannot shift them to the correct relative positions, relative to the screen centre.
Code:
level=1; //starting scale level
public function scaleOut(level:int) // scale to a level 1-4{
for (var r = 0; r < Main.ballArray.length; ++r){
// scale radius
Main.ballArray[r].bRadius *= (oldLevel / level);
[Code] .....
View 8 Replies
May 6, 2010
I know but basically I want to place some images on the stage and I want every image, whether big or small, portrait or landscape, to be scaled to about a quarter of the stage size.
I have tried coding this myself and even tried many suggestions found on the web, but they all seem to do the same thing. The code either sizes every image to be equal in width and varying height, or scale every image to be equal in height with varying width.
Say you have some images all the same size, but some in landscape orientation and some in portrait orientation. Most of the code I found for "proportional scaling" would scale the landscape images okay, but make the portrait images the same height as the others, so they looked alot smaller. Or the reverse was true.
example:image.width = stage.stageWidth;image.height = stage.stageHeight;
( image.scaleX < image.scaleY ) ? image.scaleY = image.scaleX : image.scaleX = image.scaleY;
This makes all the images fit on the stage all right, but they all have the same width. reversing the equality amkes all teh heights the same.
If two images did not have the same width before they are scaled down, they should not have the smae width afterwards in my opinion.
Sometimes I get some code that seems to work, then I change the stage size to check it and all the images did not scale to 1/4 of the stage new size when the FLA was run.
View 4 Replies
Mar 11, 2008
I've search through all the threads with "scaling" and "resizing" and can't find the solution.
Basically I have a GUI element on a gallery that I don't want to scale, while the rest of the page is free to resize/scale.
I think I need to add a listener of some sort to the stage, but I'm not sure how to do this.
View 2 Replies
Oct 23, 2009
I'm working on a project in which I'm using a background movie playing in a Movie Object and on top of that I'm showing texts and images sort of like they are in the movie itself. The way I did this is by making the movie in After Effects and giving every frame in the movie the required position, alpha and scale parameters for each object in the flash movie.
[Code]...
View 1 Replies
Nov 5, 2006
I have a vector drawing object inside a parent movieclip.The drawing object is acting as a semi-transparent frame for and image on another layer. the problem is when I scale the parent movieclip the thickness of the drawing object is changing.I know that you can turn off scaling for lines and rectangles, but is there a way to do the equivalent for a vector drawing object?
View 2 Replies
Aug 12, 2011
I have flash ui built over the chromeless youtube player right now and I'm wondering if there is anyway to set certain sprites within the stage to not scale on fullscreen without having to do inverted scaling.
Edit: I use FlashDevelop as my IDE and building this purely in as3
View 1 Replies
Apr 12, 2011
So I've got problem with some drawing objects inside movieclip in my flash file... Setting width and height of flash to match browser's w&h got my movie clip to get correct values, but unfortunately drawing objects inside of it are not scaled as movieclip. Those object are just random stripes that got some tween on it acting as somekind of preloader... All graphics are pulled from ai file, so no AS was used to manipulate them, just pure tweening in design mode...So if my stage w & h are lets say 720 x 50, graphics inside movieclip are 1600 x 900 which match my monitor's resolution.
View 1 Replies
Nov 28, 2011
I am building an application that is to run at 2 difference stage sizes. 960x640 and 1024x768 (for those paying attention, you may note that those are the high res settings for the iPhone and iPad2)The app was designed and build to run on a stage of 960x640 and when running at this size, there are no problems.When the app loads in the 1024x768 window, it "strechs" the stage to fill the window, but keeps the aspect ratio. Everything looks good and the application runs without any problems expect for one thing.Sometimes, display objects on the stage "jitter" when moving or animating. I have discovered that this is because the stage is "scaling" the x and y values, and is not pixel snapping the objects on the screen, even though the x and y values of the display object are indeed whole numbers.A prime example of this is I have 2 bitmapData images. bmData_s and bmData_h. bmData_s is 192x388 in size.bmData_h is created from a copy of bmData_s with a glow filter stroke on it, resulting in a image that is 198x394 (6 pixels bigger due to a 3 pixel stroke)I place it on the screen using the following code:[code]
Now, when the app runs on the iPhone which is a 960x640 screen size, or on the PC which is using a window of similiar size, the image doesn't appear to move at all the "stroke" appears and disappears exactly as it is suppose to However, when I run it in a window that is 1024x768, the _h image appears to "jump" one pixel up.I have encountered many other similiar things that only occure when the stage is scaled. There is a spot in the app where I am animating a bitmap by manipulating it's scrollrect x and width (have it's do a wipe in from right to left like a peice of paper unrolling on a table) and due to the scaling, the right edge of the image jumps left and right 1 pixel but on 960x640 screens, it looks perfect.Does anyone know how I can compensate for this effect so that this jumping doesn't occur when the stage is stretched to fit the window it's running in?
View 2 Replies
Nov 28, 2011
I have developed the entire module with 800x600 Resolution.But Now I got an issue that i need to reduce the content area (Shrink the contents instead of changing the resolution). Because some one had developed the custom player that will affect some of the margins of the content.Is there any AS2 script is avail for scaling the entire stage to 80 % of its original size for the entire module...
View 2 Replies
Feb 23, 2009
I have a flash project that I published to an .exe so it can run on the desktop. I also used the code:
Quote:
fscommand("fullscreen", true);
This is to make it launch in fullscreen. However the stage dimensions are 1100 * 800px and when you lunch this on certain computers with lower res monitors, some of the stage area is cut off. I found that you can always right click and select the "show all" option and it will scale down to fit the monitors screen. How can I make this do that automatically without having to right click and selecting the "show all" button.
View 5 Replies
Nov 19, 2009
I'm having a little trouble getting my swf file to fully scale in fullscreen mode. It doesn't look like the stage is scaling and my picture gets cut off. Attached is an image and the code also. It goes full screen at its native resolution fine but gets cut off when i try to scale.
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.Event;
[code].....
View 2 Replies
Mar 18, 2010
i have a following problem with displaying a scaled and moved image. cliffs:
1. create movieclip
2. draw a square inside, with a starting point (top left corner) in (75000, 75000)
3. move the movie clip so that the square is visible on stage. its important that the movieclip for each iteration is the same.we reapeat this procedure, each time doubling the x/y of starting point, and its width and height. each time we also scale down the movie clip (so its two times smaller than the previos one). we position the movie clip.basic math suggest that all squares should appear one over another. this is what i get:zoomed:
Code:
container square2 x/y: (-47900,-47900)| zoom: 2| w/h: 500| 64%| x/y: (75000,75000)| stage x/y: (99.95,99.95)| stage w/h: 320
container square3 x/y: (-47900,-47900)| zoom: 3| w/h: 1000| 32%| x/y: (150000,150000)| stage x/y: (98.8,98.8)| stage w/h: 320[code]....
View 1 Replies
Apr 26, 2011
How do you do this in AS 3.0?I did it in AS 2.0 with the following code:this.onLoad = function () { this._xscale = 133.33; this._yscale = 166.70;can get it working for AS 3.0.
View 2 Replies
Jan 3, 2007
I have a banner that is 468x60 pixels and I need to rezize it to 728x90 - this includes scaling all of the content over the timelines proportionally.
View 6 Replies
Jun 30, 2007
how do I code stage resize with scaling movieclips? I can do stage resize and position/scale movieclips relative to stage size..but i don't how to have a scalable movieclip retain its scale relative to stage size. how do I code this? for example, i have a movieclip originally 50px wide, and the stage 100px wide..when i click the mc, it scales up to 80px wide. and when I resize the stage to 50px,(50% of stage size) i want the mc to scale to 40px too(50% of mc size).. and when I click it again to restore to it's original size, i want it to scale to 25px(50% of original size). then finally when i scale the stage back to 100px, the mc again is 50px wide.
View 2 Replies
Jan 30, 2009
how to proportionally scale multiple movieClips relative to the stage size.
I understand movieclip placement relative to the stage, and I have been using a code to scale MovieClips as a fullscreen background (also proportionally)
But
I can not figure out for the life of me how to scale other movieclips in relation
to the stage size.
for example I have a background_mc that proportionally scales with the stage
to fill without distortion.
HOW do I then place another MC say center aligned (I know how to do that) that will scale with the background without distortion?
Ideally I would like to place several MC's on my stage all scaling in proportion with the stage yet independently.
I have not been able to find any documentation on this. lots of tutorials on backgrounds and color fills and the like but nothing on proportional scaling of independent mc's
this is the code I use for my background_mc (can it be modified or should it be thrown out the window to achieve independent scaling?)
Code:
import flash.display.Sprite;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.Event;
[Code]....
View 7 Replies
Jul 24, 2010
I have drawn colored rods which I have placed in the library and have put one of each on the stage with instance names likeblueRod_mc, etc.I place them around with time-line code like
blueRod_mc.x = 300.0;I have now created an Actionscript class called Problem.I build a new object from Problem which I have called Riddle.But when I put blueRod_mc.x = 300.0 in a method (of Problem),I get the message that blueRod is not accessible.So I triedstage.blueRod_mc.x = 300.0;That did not work either.
View 9 Replies
Jan 30, 2009
I need some assistance on how to proportionally scale multiple movieClips relative to the stage size. I understand movieclip placement relative to the stage, and I have been using a code to scale MovieClips as a fullscreen background (also proportionally) But I can not figure out for the life of me how to scale other movieclips in relation to the stage size. for example I have a background_mc that proportionally scales with the stage to fill without distortion.
HOW do I then place another MC say center aligned (I know how to do that) that will scale with the background without distortion? Ideally I would like to place several MC's on my stage all scaling in proportion with the stage yet independently. I have not been able to find any documentation on this. lots of tutorials on backgrounds and color fills and the like but nothing on proportional scaling of independent mc's this is the code I use for my background_mc (can it be modified or should it be thrown out the window to achieve independent scaling?)
[Code]....
View 2 Replies
Jun 21, 2011
Is there any performance difference? I am scaling a 2000 - 4000 wide movieclip, within a 600 wide stage. Does it matter which way I scale it in terms of CPU usage;
myMovieClip.scaleX *= 2;
or
myMovieClip.width *= 2;
The movieclip will be scaled multiple times and to varying sizes.
View 5 Replies
Mar 3, 2011
in flash AS1,2 you just input this code Stage.scaleMode="noScale";
on a frame of the main stage to prevent scaling of movieclips on fullscreen.I tried the same thing in AS3 and its not working for me. so my question is how would i apply this in AS3?
View 8 Replies
Aug 6, 2010
I am creating an AIR nativeWindow. I am adding two children, an HTMLLoader and a Sprite. The child Sprite has two children, a TextField and a Sprite that will be used to draw. I have set stage.scaleMode = "noScale" and stage.align = "TL", which the HTMLLoader seems to respect. However, the child Sprite scales its children whenever I set a height.
public function BaseWindow(){
var winInit:NativeWindowInitOptions = new NativeWindowInitOptions();
winInit.type = NativeWindowType.NORMAL;[code]..........
How do I prevent the distractor Sprite from scaling its children?
View 1 Replies
Jun 23, 2009
I want to create an animation which simulates a camera pulling backward through a forest of trees. I've created a tree symbol and I can scale it down over time, which looks pretty good. So theoretically I can generate a whole punch of these trees on either side of my stage and gradually scale them down toward a common vanishing point in the middle of the stage (and I will also gradually move the vanishing point off to the side to simulate the camera pull back transitioning into a sideways pan). The problem is that scaleX, scaleY attributes always scale down toward a preset registration point on the symbol that I don't seem to be able to change programatically at runtime, whereas I need to be able to scale the tree toward the vanishing point.
The only solution I've come up with is to parent the tree symbol to another invisible symbol whose registration point IS at the vanishing point, then scale down that invisible symbol so that the tree scales down and also transposes itself in the direction of the vanishing point. But this feels cumbersome. I bet there is a way to do this with matrix math, if only I had a better understanding of it.
View 1 Replies
Jun 25, 2010
'i am doing a game for children where users can drag and drop resize and scale movie clips on stage! The drag and drop is not an issue...however im not quite sure how to do all the rest... is there a way or a tutorial to do this?
View 1 Replies
Jun 25, 2010
'i am doing a game for children where users can drag and drop resize and scale movie clips on stage!
The drag and drop is not an issue...however im not quite sure how to do all the rest.
View 3 Replies
Oct 30, 2009
I'm using the code below to scale my main movie with the browser window.What happens is that the images in the movie are baldy distorted ..Can I preserve the images to scale or at least can I scale them with a different scale?I'm using CS3 ,AS2 and Flash Player 9
Code:
// ***Stage aligned top left
Stage.align = "TL";
// *** stage scaling with the browser window.
Stage.scaleMode = "Scale";
[code]....
View 9 Replies
Jun 25, 2010
'i am doing a game for children where users can drag and drop resize and scale movie clips on stage!
The drag and drop is not an issue...however im not quite sure how to do all the rest..
View 1 Replies
May 23, 2010
I am trying to scale external swfs to the window size that exists at the point when the button is clicked. The external swf is being loaded into a dynamically created mc in the main swf. I am using a resize handler and the issue i am having is that all external swfs only become veiwable when the window is resized. After the window is resized, they become viewable and scale on the resizing of the window. I call the resize handler to upate the scale base on the window size but to no avail.
The AS (3.0) that I am using can be seen below.
ActionScript Code:
stop();
var Xpos:Number = 0;
var Ypos:Number = 0;
[Code].....
View 0 Replies
