I use following statement to draw a shape[CODE]for(....){ sprite.graphics.beginFill(..); sprite.graphics.drawRect(x,y,1,1); sprite.graphics.endFill();}[CODE] But I find above shape is not vector shape.Because I change the IE size,I find the size of shape don't automatic change. How to use sprite.graphics to create vector shape?
View 3 Repliesneed to draw the shape of a existing movieclip which is irregular shape.
View 2 Repliesneed to draw the shape of a existing movieclip which is irregular shape.
View 1 RepliesIs there a way to take a vector graphic and translate it to ActionScript 3 shape code? I'd like to be able to create a graphic in Illustrator, and then instead of embedding or importing it into Flash, I'd like to draw the shape with AS3 shape code.
View 6 RepliesI create using actionscript to draw dynamic shapes
shape1 = new Shape();
shape2 = new Shape();
and draw some complicated things with actionscript that is done dynamically by user input
I need to save/export the drawing ,these shape as some kind of vector file
so this drawing can be manipulated later on by vector program as flash or illustrator
how to save shape file as a vector file
I have one class called Person that extends a Sprite. First i have a bitmap that i add to the sprite class: This bitmap is a transparent PNG. addChild(_imageBitmap); then i did some drawing in Flash that has the shape of this person and extended this to the SimpleButton. This way, only the edge or the inner shape is clickable. then i add this shape to this Person class too.
[Code]...
I am working on a project that some one else created. There were very orgainized, but my question is this: There is a starburst shape, and in the property inspector it is labeling as yellow burst, and that's how it shows in the library. But one instance of it is red in the movie, and I can not find it to change or delete as they called everything dynamically. how this was done, or how I might locate this object?
View 3 RepliesI'm trying to create some MovieClips with a glow effect when you rollOver and the glow effect dissapearing on rollOut. But when the rollOut is finished my background movieclip to which I apply the filter (a simple 20 x 20 vector circle) all of a sudden appears jagged, when before rollOver/rollOut it appeared smooth as it should. What could be going on here? I'm pretty new to AS3, thus the example isn't working properly yet. For instance:
* when you roll over the item the first time it immediately shows the end phase of the glow in stead of animating. I thought I'ld circumvent this with Tween.rewind() in the constructor, but that didn't do the trick.
* also I'm not sure whether the addEventListener for TweenEvent.MOTION_CHANGE is placed in the correct spot. I tried putting it in the constructor, but that resulted in the event being recieved continuously by _onMotionChange.
But the most important part is the jagged circle after the glow filter has dissapeared. This is what I have so far (abbreviated example):
[CODE]....
I want to create worm game with actionscript. First of all, i will create the ground with vector draw. By using actionscript, is there a way to edit or delete part of the vector draw(ground) when the target(shooting) hit the ground?
View 1 RepliesI want to create worm game with actionscript. First of all, i will create the ground with vector draw. By using actionscript, is there a way to edit or delete part of the vector draw(ground) when the target(shooting) hit the ground?
View 1 Repliesin the script that i have made...i use unit vector to draw the line little by little
[Code]...
is there other way to make the animation line like that?? i just learning AS3.
I have a class; "Game".I have a bitmap in the library; "Grass"I want to be able to run a function from the main timeline that uses the bitmap inside of a movieClip.My current attempt is as follows; I make an instance of "Game" and have an .as file for Game that has:PHP Code:
package {
import flash.display.MovieClip;
import flash.display.Shape;
[code].....
I look up AS3 api,I know AS3 can draw circle,Ellipse,Rect. Is there an api to draw diamond shape? How to draw it. I want to make two diamond shapes cross,and make one diamond shapes from long to short. Like star effect.How to realize it?
View 2 RepliesI look up AS3 api,I know AS3 can draw circle,Ellipse,Rect. Is there an api to draw diamond shape? How to draw it. I want to make two diamond shapes cross,and make one diamond shapes from long to short. Like star effect.How to realize it?
View 1 RepliesIs there any way to draw text in a DisplayObject or Shape using only ActionScript? The only way I can find on the web is by creating a TextField, but I can't add a TF to a DisplayObject or Shape.
DisplayObject implements IBitmapDrawable which can be passed as an argument to the draw function of a BitmapData object, which then can be drawn using graphics.beginBitmapFill.[code]...
how to draw the attached shape progressively over time?
View 9 RepliesI am trying to draw a line that goes from point A to Point B. Along the way there are objects (of any shape) that force the line to go around them in order to reach point B. It cant go through them. This is like directing someone using a map. You can only draw a line between the blocks / along the streets.
I tried that using collision tests. Fine, I can now find the coordinates at that instance, but I still cant get the line to go around the object before proceeding to point B.
How do I draw a square shape with a gradient fill in AS3?
View 3 Repliesdrawing out line that will serve as a mask im tryin to animate a drawing out of a line, but the line wont be an animation itself, itll be used as a mask that will reveal outline of a rectangle i'm starting right now and im on this stage so far, the problem is i dont understand why this line is not drawing out horizontally, while it should variables xpos and ypos are coordinates of the position i want to start drawing it from, xcor and ycor are the cooridnates that will be used to stop drawing once it reaches this point, then jump is how fast i want the line to draw(amount of pixels) ps:the type is there because i will also make another case for vertical line.
Code:
lineDraw = function(type, xpos, ypos, xcor, ycor, jump){
this.createEmptyMovieClip("temp", this.getNextHighestDepth());
this.temp.lineStyle(5, 0x003300,100);
if(type=="horizontal"){
[code]....
How you draw squares for example in AS (if at all possible) and using shape tweens in AS (again if possible).
View 3 RepliesWhen I draw a path with the pen tool, and fill it, it seems as if the shape now has two parts. If I drag the filled area around, it's breaking apart from the path (or border). So how can I make this one entity?
View 3 RepliesI'm using Flash Builder 4 and am in the process of learning. The short and simple explanation is, I want a tab navigator that has tabs that look like this: I know I could do this using an image-based skin, but I figured (and could be wrong) that programmatically drawing the shape would be better in terms of scalability. As long as I get the result I'm looking for, I guess I don't really care if it's mx or spark. I tried doing this:
[Code]...
I usually created a movieclip in flash and assign it to actionscript class(using export for actionscript method in its property panel) that exteds movieclip.but sometimes movieclip is just too heavy for that,is there any possible way to draw a sprite directly in flash(not by code),and control it in actionscript-3
View 4 Replieshow to draw border for even/uneven shape object? it is stored in a movieclip
View 0 RepliesI am trying to draw a box shape on screen which fills with a gradient, but according to the angle between your start and end mouse points. ie, if you draw from 100x100 to 200,200, the angle will be 45 degrees and it will draw your gradient fill within 100x100 to 200,200 on a 45 degree angle.
Trouble is, I can EITHER get the angle working just fine if I fill the entire shape, or the angle isn't right but the fill area is correct. Please see the attached fla and click drag within the red box, trying out the 2 matrix arrays in thereto see the 2 x scenarios listed above.
I'm on the user have to be able to draw/trace outlines of different shapes. So for example an "S" shape is on the screen, and the user needs to try to draw OVER that shape. So it's not just mouse recognition, it has to see if the user draw over that shape good enough. So it's kind of like a colorbook but you only draw the outline of the shape, if you know what I mean.
I've been searching the web and haven't found any pre made solution for this, but I thought that before I try to make it all from scratch I could ask you guys here about it.
I found a nice script for drawing a donut shape. I don't know why it only works with using 'this' or ' _root' . You should be able to apply this to a movieclip?Or am i missing something?[code]
View 3 RepliesI'm trying to create the following component: Just for information, the blank space will contain a text control, and I'm creating a component that represents the black corner with the (i) icon and the "promotion" text. The part I'm having issues with is this component representing the black corner with the diagonal text. The text has to be able to hold 2 lines. And the black corner has to be able to adjust to the text's size. What's more, the text has a rotation... I'm having some doubts on how to do this:
Should I have different controls for each text line? Should I draw the text in the shape (after doing the rotation) or should I just overlap both components? [When I talk about drawing the text in the shape, I mean in the same way as asked in this question] Is there any way to get the proper size of the triangle shape without doing some extravagant calculations?
[Code].....
I need to have 2 kinds of masks, one with a registration point in the top left so that when I tween its height it expands downwards, and one with a registration point in the bottom left so that when I tween its height it expands upwards?how do i do that, with code ofcourse?i have made something but i dont know if its the right way:(this expands downwards, but i dont know how to get it to expand upwards)
Code:
import gs.TweenLite;
var subMask:Shape = new Shape();
[code]......
I want to make an editor like this site. [URL] If you browse this link you will find "Button. If you press this button you will navigate to a editor to design your layout. After draw a rectangle or circle or line you can resize that or can rotate that. When you finish if press the "you will back to the previous page where your desinged layout display. If you press the "" again then you will navigate the editor with the previously designed layout. I want to make a site like this. I want to use the flash cs4 to make the editor. Anybody knows how to draw a rectangle or circle shape with mouse and how to scale by setting the point and how to rotate by setting the rotation point also by using flash cs4 and as3?.
View 3 Replies