ActionScript 3.0 :: Is A Game Like Starlight Just 3d Rotation Tool
Dec 17, 2009Is a game like starlight just the 3d rotation tool? How do you detect if its a picture?
View 1 RepliesIs a game like starlight just the 3d rotation tool? How do you detect if its a picture?
View 1 RepliesI noticed that for some reason whenever I use the 3d rotation tool on an object inside of a clipping mask that the object releases the clipping mask. Are 3d objects not supported within clipping masks? Is there a way around that?
View 6 RepliesI am using Adobe CS4 Web Premium on Windows 7 Home Premiukm 64 bit. I am in the learning stages and my tutorial is explaning the 3D rotation tool and its use. However, I can not get the tool to show up on the stage, much less use it.
View 2 RepliesI'm new to Flash and I'm having trouble rotating my mc 360 degrees using the 3D Rotation Tool. I can rotate it 180 degrees, right side coming forward, but when I attempt to rotate it back to its original position, it doesn't continue the rotation in the same direction (right side coming forward). So instead of apearing to rotate completely, it looks like it rotates half way, stops, and rotates back (left side comes forwards). Probably an easy solution, but as I said, I'm new.
View 9 RepliesWhen using a simple line shape graphic (that was created in Flash) to supply Deco Tool > Symmetry Brush > Rotate Around, the line looses it's thickness along the rotation. See attached image. I'm following chapter 2 in Flash CS4 Classroom In A Book, and the visuals from the book do not match what is happening on my computer.
View 1 RepliesI created an animation using the 3D rotation tool, but the quality, the rendering is very bad, rough jaggy pixelated edges. Is there any way to improve the quality.
View 3 RepliesWhen I try to rotate a movie clip along the x-axis on the default stage size (I'm using a basic rectangle right now), the rotation appears just as I expect it to. It "rolls over" with the perspective even on both sides of the rectangle.
When I try to duplicate this in a movie with different dimensions (320x480) and apply the 3D Rotation Tool, the rectangle skews to the left for some reason. (See attached .fla files)
I've tried changing the registration points on the movie clips, I've tried making new files with the "Adjust 3D Perspective Angle to preserve current stage projection" box checked both on and off, and I've tried repositioning the actual Rotation Tool, but I can't figure out what's wrong. Could it have something to do with the stage resizing?!
I am designing a sailing game and I am trying to limit how many degrees it can turn.
onClipEvent(load){
var speed:Number = new Number (-1)
} onClipEvent(enterFrame){
if(Key.isDown(Key.UP)){
if(Key.isDown(Key.RIGHT)){
_rotation +=3
[Code] .....
I just recently started playing with cs5 and it's new features. I tried to rotate a textfield with the 3D rotation tool, but when you do this, the textfields gets blurry.And it seems like it's not a vector text anymore, because when you zoom in, it still is blurry.Is there a way to prevent that?
View 5 RepliesI would like to code an script that would with some trial and error method learn to play QWOP game, that is available at Flash format on Internet (more information on QWOP). I found out there are some challenges on it: The program is available on Flash and I don't know how any Script (I am planning to use JavaScript) could use virtually its UI, it means to send the appropriate key strokes to the game UI. I know Java Script is not the easiest language to master and especially there are challenges on such a complicated coding aim as Artificial Intelligence.
[Code]...
I found that .fla files do not save in Flash CS4 when the Deco tool or Spray Brush tool is selected. Is this a bug? Or is there a workaround to this issue.
View 3 RepliesWorking with senocular Transform Tool - How to remove/disable tool for objects Im new to AS3, and i have to use it for my current project. I have used the AS2 Transform tool extensively, but needless to say, the AS3 version works entirely differently.
The way i understand it, the tool applies to and every Sprite , movieclip on stage
[Code]...
I have a movieclip and when I do 3D rotation from Transform panel, It rotates perfect, center is in the middle of image, and when I apply mc.rotationY, rotation center is in left of the image, aren't 3D rotation from Transform panel and mc.rotationY from AS same? what's up?
View 2 RepliesI'm trying to do some augmented reality projects with flartoolkit . I can now put simple 3d objects on my marker and it works fine , but I wanna give my project some events that the user can interact with. I'm trying to trace the rotation of the marker. there's a container:DisplayObject3D which my application uses to add the 3d objects , I traced this :"trace(container.rotationZ)" but it's just returning 0 . I studied another AR application's source code and it was using the rotation of it's container object without problem .and I think I should mention that I'm using the exercise file of seb lee delisle papervision3d course from [URL]. anyone has any experience with flartoolkit? the main functions of my my code is as below:
[Code]...
Is it possible to have the child movieclip rotate separate of the rotation properties assigned to the parent? so ultimately giving the child element it's own axis?I've customized Lee Brimelows (gotoandlearn.com) 3D carousel to spin on the x axis to make it a vertical carousel. I've also rotated that by 45 degrees on the y axis to see all the items, and wrote a snippet of code to hide the left portion of the carousel. The entire carousel is contained within the 'container' movieclip, and inside of that are my carousel items (as seen below), with the larger item being the item in focus.
On rollover of the item in focus, I want to rotate it so it faces the viewer (as seen below),basically removing the 45 degree rotation applied to the container.The problem i'm running into is when you rotate the container (changing the rotationX of the container), the axis basically rotates with it, so when i rollover the next item 'in focus', the following happens..(in the example where it appears how it want it to, the carousel is at a rotationX of 0, so it works fine)
Program A has a cannon that aims to line up with where-ever the mouse is pointing, in 360 degrees, and fires when the mouse is is clicked. Program B has an eye instead of a cannon that should in theory do similar functions when the capslock key is toggled, but instead only has a 90 degree range of motion from the Right of the eye toward the bottom (quadrant 4 only). Where did the ther 270 degrees of rotation disappear to?
[Code]...
i.m trying to create a 3d rotation much like the widely used carousel only the rotation i desire consist of four upright(90 degrees) movieclips resting on a slanted, 30 degree plane which rotate onEnterFrame or following a tween on a oval like path - then pause for a given number of seconds at the four movieclips positions equal in distance on the plane
function around() {
this._x = Math.cos(this.angle) * radiusX + centerX;
this._y = Math.sin(this.angle) * radiusY + centerY;
var s = this._y /(centerY+radiusY);
[code]....
Why isn't there the Z, rotation X and rotation Y fields in my motion editor panel?
View 1 Repliesim making a bone animating system in flash but then i want to give it a more vital animation by manipulating its z y x position how is it possible using the 3d tool?im doing everything needed but when i get to that point nothing seems to work,i dont get 3d tool options.
View 2 RepliesI am watching the tutorial on the motion editor and when he opens the motion editor to edit the Rotation X and Rotation Y values I'm in trouble.My motion editor now only shows Rotation Z but, no Rotation X or Rotation Y. What am I doing wrong?
View 1 RepliesI am trying to do a simple "pseudo 3D" rotation of a movie clip. The clip would "flip" on to the screen. I have created the effect using PaperVision3D, however, the final SWF is about 64k and my project requires a smaller file size. I tried to create the flip effect manually by creating skewed versions of the clip and tweening between them, except this doesn't work because the shape is not tweaked along the vanishing point as it should be. It looks like perhaps I could accomplish what I want to do using the MatrixTransformer but I've not had much luck so far.
View 3 RepliesI'm trying to pause my rotation on rollover of a movieclip and restart rotation on rollout of the movieclip. Here is my current code,
[Code]...
I want to create a line tool exactly like flash line tool. But the code that I am using shows the line when we release the mouse button. How can I show the lines while it is drawing
Code:
this.createEmptyMovieClip("drawing_mc",this.getNextHighestDepth());
drawing_mc.lineStyle(1,100);
[code].....
I am going to develop a very simple game for android and for iphone/ipad I have the option to develop it in cocos2d or in adobe flash air (i am not a developer, but i have 2 developers who are offering me the service)I have a developer that states that cocos2d is better and other one that states that adobe flash air.I want it in cross platform.the cost offered by both developers is the same..i have heard that adobe air has the flaw that it is very slow, is this real? if you had the 2 options which will you use to develop your game and why?
View 1 RepliesI'm making a game that populates user-designed cards into the game using an external xml file. My main class loads the xml file and then calls to the "Card" class, which wants to use the xml file. I've tried using this.parent and it just gives me a null object reference error. This is what I have so far: Main.as
[Code]...
currently i making this game and objects would spawn at random and be able to click but when de game starts itself, the spawn is correct but i am unable to make it stop when time goes to 0seconds.
View 1 RepliesI'm creating a game at the moment for my university course and it involves the player character jumping on top of boxs twice to break them as opposed to just once.What would be the most efficient/simple way of writing this in Actionscript 3.
View 1 RepliesI have recently started working with Mahjong game. But being not so experienced developer. I am just confuse about many aspects of it. So if anyone could throw some light on it. I have to build the game where there could be different number of tiles on screen. 32, 48, 64 , 80, 96, 112 and so on Now I have questions regarding the levels of blocks in this game. I mean the layouts of the game should be predefined or they should be dynamically created? Also I wanted to know how the surface of enable and disable symbols are created?
View 2 RepliesI was trying to make a game, and the character inside the game could swim. However, I only wanted him to swim in short bursts that refueled every time he hit the ground.
View 9 Repliesim trying hard to make a Game like the Pokemon TCG .
View 2 Replies