ActionScript 3.0 :: Linking FLV Files - Auto-load The Rest One After Another
May 13, 2009
ok so i've created (X) amount of .flv's and i basically want a slide show but i didn't want to make it all one file bfcuase the time line would be longer. i need to link all the files so that when i play the first one it will auto load the rest one after another.
View 5 Replies
Similar Posts:
Apr 19, 2011
Here's my WCF REST endpoint:
[WebInvoke(Method = "POST", UriTemplate = "_test/upload")]
public void UploadImage(Stream data)
{[code].....
And I'm using the multipart parser from here: http://antscode.blogspot.com/2009/11/parsing-multipart-form-data-in-wcf.html.My issue is that the above works great for some files (.bat, .txt, .cs, .doc) - I see in Fiddler all the good signs including the 200 (OK) status. When I try to upload other files (.xls, .vsd), it fails with a 400 (Bad Request) status. I'm very surprised that a .doc would work and a .xls and .vsd would fail.
It is consistent as well. I've uploaded several .doc files successfully without any failures. I've also tried to upload several .xls files - some succeed, some fail (the successes are consistent over and over, the failures are consistent over and over). As I write this and test more and more files, there is a .pdf file that consistently produces a 504 (Fiddler - Receive Failure) error.
FYI, I am using Flex on the client and using the FileReference class to do the uploads. The Flex code is as standard as they come - using this code with the only change being the WCF REST URL: http:[url].....
View 1 Replies
Nov 1, 2011
I have a function that loads a room and when I load the room I have progress bar that displays with the percentage downloaded. The percentage text seems to be resetting with each load of an image but not the progress bar. How do I reset my progress bar?
Code:
// add room image to the viewport
function addRoom(event:MouseEvent):void {
//trace(rmPictures[event.currentTarget]);
var rmloader:Loader = new Loader();
[code]....
View 1 Replies
Jan 5, 2010
I have a function that loads a room and when I load the room I have progress bar that displays with the percentage downloaded. The percentage text seems to be resetting with each load of an image but not the progress bar. How do I reset my progress bar?
[Code]...
View 2 Replies
Nov 23, 2011
I made a simple animation for a preloader and when the animation is finished a boolean is set to true.At the same time an external swf is being loaded and also sets a boolean to true.If both booleans are true the externally loaded swf is displayed.
The loading works, the booleans work, everything works just fine except the animation when loader.load(content) is initiated. When I comment this line the animation works and offcourse nothing is loaded. When this line uncommented the animation won't work (visibly) but the swf gets loaded and displayed...
View 11 Replies
Jan 22, 2010
in XML gallery , how we can load all images first so that rest of the slide show runs smoothly
For example: I have placed 10 images in XML , when slideshow starts , all the effects not appears , because it waste time in loading each image on its turn I want to load all images first , then want to start the slideshow how i load all images at the start ?
View 3 Replies
Nov 12, 2009
So I have main .swf file(I'll call it movie1) that leads to webpages that are not in the movie. The webpage has a navbar which is a seperate .swf file (I'll call this movie2). I need the buttons on the navbar to link to a certain place in the main movie. Is there a way to use gotoAndplay in movie2 to go to a scene in movie1?
View 4 Replies
May 22, 2010
So, I'm making this website, and each page is a separate swf file. Let's call them 1.swf, 2.swf, 3.swf.. 6.swf.So far, I suceeded in linking page 1 to page 2 using Loader, but there's a problem. Page 2, in the player, is OVER page 1. That mean's you can see page 1 where you should be seeing page 2 background.My question is, is there anyway in AS3 to unload or close page 1, right after page 2 is loaded?
View 1 Replies
Jul 25, 2011
I made several SWF files and I am trying to link them together but I am not sure how. Right now I have 3 applications, and a main page. All 4 SWFs were compiled from different FLA files. The main page has 3 buttons that links to all 3 of the SWF files. When I tried to do a URLRequest-URLLoader method to load the swf files, I realised I had to compile all the MovieClips of the 3 applications within the main.fla for them to actually work when you do URLLoader to load them(or it will throw a missing file error). I couldn't move all the graphical assets into main.fla as there are many replica names of different graphics from all 3 different application fla files.
Is there a way to still link up different SWF files without the need for all the graphics to be in one similar FLA file? or is there a way to remedy my situation without having to rename all the MovieClips?
View 9 Replies
Jun 17, 2011
I needed to break it in smaller pieces because it is a large file (over 300 mb) and every time I wanted to publish the entire project flash crashed.
Here is my test: I have two exe files that should link back and forth. Intro_YIM.exe, which has a button that links to Videos_FrontPage_YIM.exe Here is my code, which is in Intro (button name= nav_4).
[code]...
Problem: The link seems to work, but there is a message that says save or run. When I click run, there is another message that says the file can't be open.
Questions:
1. Is there a better way to handle links using executable files using Flash CS5 and AS3?
2. If swfs were used, how can I have a main page displaying all other swfs as they are linked?
View 5 Replies
Jun 26, 2009
Files: Attached is a link to a file I made named "index". [URL] I would have liked to have included the following files but was limited due to "you-send-it" not uploading folders. Files not included: [but functioning and vital to the site as well as the question]
- xml list
- images [folder]
- thumbnails [folder]
Project scope: Website is an online-art gallery. I was able to get a functioning xml rolling thumbnail bar as well as have it load images. [Due to certain circumstances I was forced to put the project on hold until now.] It consist of 17 buttons, on the index [home] page, which are to call upon an xml file to load the appropriate scrolling thumbnail bar and the images which it loads upon clicking.
Problem
When you open up the index file, go to the actions layer. You will see the script needed to load in the xml scrolling thumbnails as well as the associated images. The actionscript is fine and works in as much as when I save out an swf file the thumbnails dynamically load in and when I click on them the associated image loads to stage as well. [again if you download the index file you will not see this as not all the files were able to be uploaded due to "you-send-it" as mentioned.]
[Code]....
View 8 Replies
Dec 1, 2011
i am creating an app two swf file ( one is interface file and another one is output file) in AS2. i in connecting the two swf files. i.e if i press any button in one swf it have to sent data to another file and it have to trigger some function in that file.
View 1 Replies
Feb 2, 2011
If you compile a Flash project into a .swf file and that project refers to another .swf file, is it linked statically or dynamically? That is, is the second .swf file contained physically in the first .swf file or does the first .swf file refer to the second at run-time?
View 1 Replies
Nov 17, 2010
I have about 12 SWF files that I need to play as one swf file
Heres were i'm at right now. Opened new file. Imported each swf file into the library. in one layer I have 12 keyframes each with one of the swf files in it. I need the swf to play through then go to the next keyframe and play that movie and so on.
I guess the question is I'm not sure where to put the actions (on each of the keyframes or in the swf file or both) and I'm not sure what actions need to be used.
View 9 Replies
Jan 11, 2011
trying to use a CMS to import swf files. These swf files currently access source files through the standard code of: [url]...
and all works fine when testing on my machine because the swf is next to the file folder [url]....what I need to figure out is, is it possible to reference the [url]... folder as an absolute URL e.g. (http:url..) or is there another workaround I am not seeing?
View 2 Replies
Feb 18, 2010
Are there any scripts to auto-indent an actionscript 3 file? I want to standard the check-in to source control, and this way, it'll be uniform (instead of mixing spaces and tabs).
View 1 Replies
Jun 9, 2009
I am trying to figure out how to link a bunch of buttons to different photo albums inside a single HTML page in Dreamweaver. Here is an example of what I mean: [URL]
Unless I'm mistaken, everything in this website is contained within one HTML document.When you click on any of the various buttons in the portfolio menu, they simply load up and appear inside the same HTML document.
How on earth do you do this without clicking on any of the various buttons and having them linked to another page??
View 3 Replies
May 21, 2008
i was creating my portfolio using xml gallery script from this site. the thing is that it loads one picture at a the with a preloader between each load. is there a way to load the first image and keep loading the rest so there will be only one loading time? here is my action script:
[Code]....
View 3 Replies
Apr 25, 2011
I googled it and found that in 2006 someone was trying to do the same exact thing I am and suceeded, but didn't give much detail for a beginner like me to figure out. . I am using xml to call different swf files. What i want to do is create a link in my fla file. Or my xml to call a different swf file into the same page. Pretty much like the main menus do, but I want to create a link to it inside of the text. For instance I have an swf file called members. You click on members on the left it directs you to the members swf file switch on the right. Now that swf page is reading from my xml. At the end of everyone's brief profiles i want to put a link that says more info and it directs to a different swf that has a more indepth profile of that person, but loading in the same window as all my other swf pages of course. The person that did it before said he used actionscript to do this.
View 0 Replies
Sep 21, 2010
I think there are probably three options:
Load the link in as a flashvar and allow the Flash to open the URI
Load the link into the Flash file using AJAX/AJAH and allow the Flash open the URI
Just have the Flash file call a Javascript function that opens the URI
Is one of these methods better than the other(s)?
I'm working in a CMS, so each method requires a different process to edit/control the link. In #1, the editor needs to open the Flash node and add the path to a flashvar. In #2, the editor just needs to add the path as an anchor with a specific ID to a page (or XML). In #3, the paths could be stored in many different ways. The links aren't known when the Flash files are created, so they can't be embedded in the Flash. Is there a performance/efficiency/compatibility/good reason to use #1 over #2 or #3, etc?
View 1 Replies
Oct 16, 2009
I'm have googled untill my fingers bled, but I can't find out how to load automatically an external flash file inside a mx.controls.Loader in Flash. Links for the files are; [URL] Edit: This means without a button, it loads when the origianal .swf file loads with the mx.controls.Loader in it!
View 7 Replies
Oct 18, 2009
I'm have googled untill my fingers bled, but I can't find out how to load automatically an external flash file inside a mx.controls.Loader in Flash. Links for the files are; [URL]
This means without a button, it loads when the origianal .swf file loads with the mx.controls.Loader in it!
View 17 Replies
Apr 11, 2012
I need to load an external image into the clip from the desktop using:
var myimage:File = File.desktopDirectory.resolvePath
View 1 Replies
May 12, 2010
I'm quite new to ActionScript and would be grateful for any help here. I want to load text into a dynamic text field (called 'about_tab') using a class depending on the language selected (by clicking on a flag icon) by the user. I managed to get this to work when the ActionScript was written directly in the timeline, but am having problems with doing the same thing via a class.
[Code]...
View 1 Replies
Feb 1, 2006
If i cant get a border to auto resize to the MC as MC's are load with attachMovie(); , can i get a border to animate a resize to a specific ._height, ._width (also with a var speed = #)? Am i just totally F'ing this thing up or what. Heres and example: [URL] i would make a second frame and have the AS for the border load a different value and a new MC.
View 8 Replies
Jun 13, 2008
how to load for example two xml files, and how to address each of the files? The red comments will explain what I want
[Code]...
View 1 Replies
Jun 20, 2004
I've gotten as far as getting a listbox with a list of articles to display the articles in a dynamic text box, only i can only get it to work if i use one huge external text file that contains all the articles. what i want is to have each item on the list open up its own external text file, i.e. for each item on the list, there exists a separate text file. I'm about ready to put my fist through the monitor, and that would suck because this is a really nice monitor
View 13 Replies
Oct 29, 2009
I like what the script below does but I need it to be extended in 2 ways and I can not figure how.this is what I would like this code to do...
1. play (ideally stream) sound automatically on entering the site.(right now the play button must be invoked, and it takes a little time to load.)
2. loop that same sound source
3. instead of stopping the sound I would prefer a pause.so more simply sound plays on entering site and I have ONE button (well 2 but changing visibilities) that control only pause and resume I have looked around quite a bit but can never find what I am looking for it would appear that everyones sound issues are so unique that no one has the exact issue that I do (well I am sure many do but I can't find the thread. ) and here is a link to what I have as of now
Code:
var loadSnd:URLRequest = new URLRequest("ax Mr .l..mp3");
var thisSnd:Sound = new Sound();
thisSnd.load(loadSnd);
[code]....
View 0 Replies
Feb 27, 2009
[Code]...
i have the above code wherein i load data from external text file i want the text to be vertcically auto scrolling on load without any scroll bar
View 1 Replies
Mar 11, 2009
I am having trouble by loading my homepage after my flash intro ends.Does anybody knows the ActionScript for this move?
View 5 Replies