ActionScript 3.0 :: Loading Sub SWFs Behind The Scenes Into MC
Apr 18, 2010
I have a site that has one main file and then another five sub swfs that get loaded in when you click on various buttons. I would like to load these sub swfs behind the scenes, even before they click to open them. Is there a way to load them into some mc without adding it to the stage, but making it so that when they do click to actually load that swf in, it will already be cached? I'd prefer not to do a traditional preloader for each and every sub section. I'd rather just load in all the sub swfs, have them cached and ready to go so that when they do click on a section, it will be good to go.
View 1 Replies
Similar Posts:
Dec 4, 2002
I have several buttons, that link to several scenes, containing swf files. Using the loadmovie command I can get these swf's playing on-screen. That's good.
-How can I control where they appear on my document (I'd guess these require some x or y values, but not sure how this is done) as they all appear in the top left-hand corner.
- When I mouse over another button (link to scene/swf) how can I remove the previous swf from the page, then load the new swf -as they all appear in the same spot/all over each other? Is this an unload movie command?
I was hoping to counter this problem by using different scenes (no luck there) and all I really need to do is remove the previously loaded swf, when the new one is loaded.
View 6 Replies
Aug 12, 2009
[URL]
how to do the transition between scenes? instead of external swfs?
View 3 Replies
Sep 11, 2009
I have a main fla file which loads an external swf into an empty movieclip on the main timeline which works fine but I want a button in the external swf to load another external swf into another empty movie clip on the main timeline.eg. start.swf loads UKEIAMap.swf into (empty movie clip within start.swf) MapLoader_mc then a button havant_b within UKEIAMap.swf needs to load HavantProjectSheet.swf into (empty movie clip within start.swf) ProjectSheetLoader_mc without unloading UKEIAMap.swf
View 3 Replies
Aug 2, 2006
Flash - 8 : Above is an example of what I would like to do/have done. I've gotten as far as loading the "loaded.swf" into the "start.swf" but my problem is I'd love to use that little loading action I made earlier without copying and pasting into the new movie the same actions for a different link. So, how do I load "loaded2.swf" into "loaded.swf" via the link in "loaded.swf"?
View 1 Replies
Sep 2, 2010
I'm justing starting to learn some actionscript. I can't figure out why my jpgs are flickering when I go from one scene to another. Do they have to reload each time? Here is a link: http:[url].....I have each animation as a separate scene, and you'll see that the buttons flicker when the new scene loads.
View 4 Replies
Mar 7, 2009
I'm currently working on a portfolio site, which, among other things, loads external swf files into the stage. The problem starts when I load a 400x300 swf file into the stage, which is 900x800. The result is that I get all objects which are outside the stage area in the loaded swf, on my main stage. I tried everything from changing the width and the height to loading it into a movieclip. It's always the same, I get all the elements from outside the stage of the loaded swf (if I try to change the width/height, the objects outside the scene still remain) This is the code I'm using to load the external AS2 swf:
[Code]...
View 2 Replies
Mar 25, 2002
This is just a tad difficult to explain but here goes. You start out in the intro scene and it plays a movieclip (the intro) and below it is another clip that is a loading bar and percentage. Now on the main timeline it is checking to see if the percentage is 100 or greater. When it does it goes to the main movie. This all works fine. It's when you get to the main movie that it messes up. All the buttons and a/s work fine but 3. Its sorta hard to explain... Um ok here is the a/s that is on each button unless they dont open another menu.
[Code]...
Now I probably could use a for statement for the first bunch but that's not the point of this explanation now is it. Normally the movie is in frame 1 but when you click a button that opens a new menu it goes to frame 2 and makes sure all menus already open get closed. Hence the reversal of any open m/c's. Then if none are open it opens the new menu using the "per" value from the button. Now for the problem. When I click any one of the 3 buttons it sends the whole m/c back to the intro scene. Why? Any how do I fix it? If you need anymore info I'll be glad to post it.
View 12 Replies
Jul 3, 2009
whenever I set my sound to stream and continue to make a movie with multiple scenes. The audio and video get disgustingly out of sync sometimes even off by 30 seconds. I just started an animation its only 10 seconds long with two scenes and the AV is already off by about 5 seconds. Ive worked around this by avoiding scenes altogether but i really don't want to have another 5000 frame scene. I discovered this problem in Flash MX and Im quite annoyed that it still has't been fixed 3 years later!
View 1 Replies
Aug 13, 2010
I am loading multiple .swfs into multiple .swfs, but the .swf are never being properly unloaded. I thought they were unloading until I started monitoring my Page File Usage and seeing it increase everytime I loaded another external swf.
In using this function to load my content, what would be the proper way/function to unload the content?
[Code]...
View 2 Replies
Nov 23, 2009
Using Flash 9.0 on Mac. Have externally loaded images as slideshow in swfs embedded in dreamweaver. The swfs load time after time in Firefox PC and Safari PC but only on the first try in IE7. Have not been able to test IE8 yet. [code]...
View 6 Replies
Feb 1, 2012
I have a SWF that contains 3 spaces for banners on a 'My Account' page. Initially they all showed the same banners to all customers but now we segment customers and that means each banner can have numerous variations. This has caused the SWF to be massive (over half a meg) for something we aim to have 80-100 Kb.
I believe the solution is to have the current 'main' SWF be a place-holder that decides what segment the customer is in for each banner then pull another SWF file from the server - so only the banner being displayed is the one being downloaded.I cannot find AS to download externally hosted SWFs...
View 6 Replies
Apr 9, 2009
The three buttons on the stage all load remote SWFs into the same location ... Each succesive button that is pressed is supposed to load a movie that takes the place of the one that is currently thereThe problem is, each button click merely loads it's movie underneath the existing one ... so they just keep stacking up on top of one another. I need a way for the code to check if a movie is loaded, and if so, unload that one first before it loads the current one I though an "if" statement could check to see if the "swfLoader" instance is fully loaded, and then if it is, it would know to remove child I know there must be a more efficient way to see if anything is on the stage
stop();
unit13_3br2ba.addEventListener(MouseEvent.CLICK, getUnitSWF);unit21_2bdStudy2ba.addEventListener(MouseEvent.CLICK,
[code]....
View 6 Replies
Feb 23, 2008
1) I made a german and an english swf-file, each of them containing the entire website. These two you catch from the main index-file, which is only a txt showing "german" and "english". When you click one of them, you load one of these two swfs.It takes some time, because the swfs contains a lot of heavy images which are glued to the swf. Ill get back to that loading swfs later...
2) inside each of these two swfs I made some PHPfunctions. One is a guestbook, the other is a form, where you send personal info (4 boxes, single-line) + a message in multiline to my email through PHP.When I publish the swfs individually and one at the time WITHOUT the main index (english/german) which loads the swfs it works almost fine. The input txt boxes appear on the screen, and you can type in the boxes. When I recieve this email through PHP, it up a bit. There is no space between " message" and "apartment of choice", its all one long line. Apart from that, it works...
However, when I load the swfs using the "main index file" with the german/english choice, the input boxes doesnt even SHOW on the screen. Only the txt telling you where to write what. The txt-curser shows, though, and you are aware, you should write something here, but you write using WHITE txt. When you click "send" in the GuestBook, the email looks good, the message is there, but writing the message on the website, you dont see what you write, because it white!
QUESTION:How do I load external swf-files ( not only images, but entire files, that itself is told to load other swfs) into a main, so that the PHP inside these swfs are working properly? If I am to write some script inside the indexs ASRunActiveContent, where do I write it?
View 1 Replies
Dec 2, 2009
I have been working on a project which has been giving me headaches. I want to be able to navigate through a presentation using the arrow keys - To do everything on the one timeline was going to be too complicated and messy so tried to create separate files but could not get the separate files loading -.My next problem is incorporating the two approaches - here is my code from my test files with my attempt added:
stop();
// create an array to hold the names of the frame labels
var labels:Array = new Array();
// take the name of each label in a MovieClip and put each
[code]....
I can either get the arrow key navigation to work or the previous movie to load but the left arrow key then doesn't navigate back. Although in saying this version doesn't work and I can't get it load again.
View 4 Replies
Nov 21, 2010
I have a conundrum in that I have 5 SWF files, I have various buttons in these SWF files linking to one another. Now all I want to do is have these buttons open up the relevant SWF file (and therefore completely replace the current SWF).I have been using a Loader class so far, but have just realised that this simply loads the new SWF into the original one! (Because I am dense), and everytime a button is clicked its loading the SWF on top of the original (slowing down my program quite a lot, as you can imagine!)
Is there no simple way of just linking these SWFs together without loading them on top of another? (I looked up unloadAndStop, but I can't get it to work in my SWFs! I have also read containers being mentioned, but I would rather stay clear of that as well if I can!)
View 1 Replies
Dec 11, 2010
I have a problem. We have a website www.onlinerealgames.com which hosts the game developed by our company. Recently we wanted to change the template. We are testing the new template in a subdomain of ours which is www.onlinerealgames.in . Everything is fine except that the swfs in the server are not loading. Instead they are showing Movie Not Loaded. If I directly access the swf with the URL it showing the download option window.
We are having seperate database for both sites. Both have same swfs. If we change the source from .in to .com then the swfs are loading properly (in the src property of embed tag)
View 3 Replies
Feb 1, 2010
I'm trying to load external SWFs in a for loop, and I have this problem that is really eating me: In the event handler I need to know the filename of the SWF that was loaded, but I can't obtain this.
function loadManySWFs(arrayOfFileNames:Array)
{
for(var i=0; i<arrayOfFileNames; i++)
{
[code]....
View 1 Replies
Jan 12, 2010
how can i load 3 external swfs into one movieclip at the moment i can only get it to load one or it may be loading each clip over the previous one.
View 3 Replies
Apr 27, 2011
A little while ago, I made a movie that toggles between 2 SWFs on 2 frames. You can see that here -- [URL]
Here's the code I used to make that happen:
ActionScript Code:
var swfholder:Loader=new Loader();
a_mc.addEventListener(MouseEvent.CLICK, loadLeg);
b_mc.addEventListener(MouseEvent.CLICK, loadHouse);
[Code]....
For just two SWFs, that is a TON of code. What's a technique I can use to shorten my coding process now that I have 6 SWFs to switch between?
View 2 Replies
Aug 13, 2009
how to load external swf files(9) into my master.swf file one after the other. This is the Actionscript i have written so far.....(AS2)
var myItems:Array = new Array("swf01.swf", "swf02.swf", "swf03.swf", "swf04.swf", "swf05.swf", "swf06.swf", "swf07.swf", "swf08.swf", "swf09.swf");
var myMCL:MovieClipLoader = new MovieClipLoader();
var myListener:Object = new Object();[code].......
The first swf loads alright into my master swf but i can't for the life of me work out how to load the rest after each one has finished loading. Don't know if i need a for loop or what?
View 3 Replies
Apr 27, 2006
I'm doing the tutorial for "transitions between external SWFs", but I'm having a problem because in the tutorial all of the buttons are on the main timeline, but in my site the buttons are on a different timeline. This is the actionscript that the tutorial tells me to use....
on (release) { if (_root.currMovie == undefined) { _root.currMovie = "work"; container.loadMovie("work.swf"); } else if (_root.currMovie != "work") { if (container._currentframe >= container.midframe) { _root.currMovie = "work";
[code].....
View 5 Replies
Dec 23, 2006
My site loads a .swf into a blank movie clip when the site loads.target.loadMovie("coachGameDay.swf");
When a viewer loads the site again, I want a different .swf to load. Or if I hit the refresh button on the browser, I want different .swf to load. Giving it the appearance of .swfs loading randomly.
View 6 Replies
Mar 1, 2009
i have main swf that loads external swf, here is the main FLA. the animation begins and stop at frame 71:
frame 71: there is empty movie clip with instance name container, this code in frame 1:
ActionScript Code:
var currMovie:String = "section1";
[Code].....
at this point, it loads sec1.swf, but when i click to load other swf, it will not respond.
View 3 Replies
Feb 22, 2009
iv made a flash site using as3 using the actionscript on thefirst frame, this by itself works fine.iv also used an online tutorial tocreate a dynamicslideshow/photo gallery which again works fine, but this time usingan external .as file.When i try to load the external slideshow/gallery into amovieclip in the site it dosnt work and i get this error:TypeError: Error #1009: Cannot access a property or method ofa null object reference.im pretty sure its because the code used in the main flashfile is on the timeline and the code in the external file to beloaded in is in an external as file.
the code im using to load the external flash file is:
var toload =new Loader();
toload.load(new URLRequest("newfile.swf"));
[code]....
View 2 Replies
Jul 2, 2009
I'm trying to create a site which loads external SWFs into a Moviefor its content, and the entire site is contained in a Movie Clip located on the main timeline.
I keep getting a 1009 error, so I'm assuming that AS isn't drawing the loader where I want it to be, so I'm fairly certain I'm doing something wrong..haha.
Here's a link to my Files: [URL]
View 2 Replies
Feb 2, 2010
I have several swfs that now need to be brought together from one navigation menu/home screen that I need to create. This was easily done in as2 (replacing one swf with another when loading). Is this at all possible with as3? and if so what's the best approach?further info:the navigation screen will be an arial shot of a cartoon village, when you click on a house it should open up the swf activities than i've already created.
View 2 Replies
May 20, 2010
I got a webpage with a main swf.
That main swf is trying to load language files xml files and other swfs in other folders...
I got the error code that the source path can not be found... I have checked this and it is the correct source path because if I run the single swf that doesnt work from its specific folder than it is all fine. but the swf and its connected xml files doesnt work from another folder.
However if I move all the files to one folder and change the source paths then it works... I can not divide the languages into different folders and then load these files from the main swf...
How can I load different swfs with connected xmls from different folders without source paths problems?
View 7 Replies
May 20, 2004
I felt this was game for the actionscript forum as well. The site: [URL] Ok, I thought this site was done, but turns out that some people are having troubles viewing the images (nothing happens when you click on the thumbnails). At first I thought it was compatibility issues, but then I noticed it happened on my computer too! This is very strange because it works sometimes, and other times it doesn't.
I having a feeling that it has something to do with the code loading swf's from inside of two different movie clips. The code was originally made for the main timeline, but because of the style of navigation I ended up splitting it in two - and now the same code lies in two different mcs. *still with me? Each MC holds 30 thumbnails that call on the swfs. Check out the site link above to see how it works... or doesn't work. Keep refreshing and trying to load the images again if you want to see how it messes up (it just doesn't do anything)Here's the code that is in the two mcs:
[Code]...
View 4 Replies
Feb 22, 2009
I have my MAIN movie and a SOUND track. two seperate swf files, ideally I would like for the main movie to play when both are loaded.
Main Movie Loads
Sound Track Loads
> Therefore main movie plays once both files have been loaded.
View 4 Replies
