I have a banner with 4 MCs in it. Right now it starts automatically and loops endlessly. I would like the animation to play through 2 times, jump to frame 60 of the first MC and stop.
View 9 Repliesi'm having trouble finding the answer to a simple (I hope) question. I made a flash banner and have successfully added an action that will loop it 3 times, stopping on the last frame. Here is the code I entered in a separate action layer:
INSERTED A KEYFRAME IN FRAME 1:
if (numberOfTimesToLoop<3) {
gotoAndPlay(1);
numberOfTimesToLoop++;
[Code]...
I have been trying to find the answer to this for a while now. here is what I have tried so far.First frame is var loops = 0 then I dropped this on the frame i want it to stop on after 3 loops, but it continues to loop.if (loops == 3) {stop();}All I want it to do is loop three times and stop on say frame 119 after the 3 loops.
View 5 RepliesI have a flash piece that I want to loop 3 times and then stop.
View 2 RepliesI'm creating a timeline to stop a movieclip at specific times.
Using setInterval I'd like to use an if statement to pause my movieclip at each of the times indicated by variableTimes:
variableTimes = [15, 20, 25];
if(myTimer=variableTimes){
myMovie.stop();
how to give variableTimes three independent variables.
I'm creating a timeline to stop a movieclip at specific times.
Using setInterval I'd like to use an if statement to pause my movieclip at each of the times indicated by variableTimes:
variableTimes = [15, 20, 25];
if(myTimer=variableTimes){
myMovie.stop();
However, I can't seem to figure out how to give variableTimes three independent variables.
Does anyone know how to get a movie clip to loop a specific number of times in Flash? I know how to stop a movie clip from looping by using the this.stop (); command by placing the command in a separate Action Script layer, in a keyframe, inside of the movie clip's timeline. This allows the movie clip to play through once and then stop. But I need for the movie clip to loop more than once, maybe 2 or 3 times, and then go back to the main timeline.
Also, is it possible to place a pause (I'm guessing, maybe by using a timer of some type?) between the loops, so that the movie will pause a couple of seconds before it loops again and then stop? Please note I do not need the movie clip to stop when there's an event like a rollover or anything. I just need it to play a couple of times, pause between plays and then stop and go back to the main timeline.
I have an mc that i want to play 3 times then stop ... and it is not working.
I tried a basic timer
var timer:Timer = new Timer(8000, 3);
timer.addEventListener(TimerEvent.TIMER, playMovieClip);
timer.start();
[Code]....
and for some reason not only does it continuously loop but it also adds an additional play every time it loops..
loop an mc three times then stop?
Anyways I have this movieclip that is only 60 frames long. In that 60 frames I just have a mask moving from frame 1 to frame 60. I want the movieclip to play and loop 3 times then on the 3rd time stop at frame 60.
I have been messing with the do ... while script, but havent gotten anything to work
I can do basic animation but do not know action scripting. I need make a flash banner loop 3 times then stop.
I am using Flash CS4 and built my entire banner animation on the main timeline.
I've successfully set up an FLVPlayback loop in AS2 using this code:
[Code]....
What I would like to do is stop the loop after the .flv plays 3 times.
I have a very simple banner that I would like to play 3 times and stop. How can I do that in Actionscrip 3.0?
View 4 RepliesI need to make the whole ad repeat X number of times and then stop on the last frame (it always stops in the first frame for me) then I need to link the clickable button to go to a website when clicked. [URL]
View 4 RepliesI'm trying to do a simple url requestion on enter frame, but it seems to be executing multiple times?
I tried removing the event handler on handleLoadSuccessful, that seems to stop it firing infinitely, but its still executing about 10 times before it stops. How do I make it only fire once?
addEventListener(Event.ENTER_FRAME, onLoadHandler);
function onLoadHandler(event:Event) {
var scriptRequest:URLRequest = new URLRequest("http://ad.doubleclick.net/clk;254580535;19110122;t?http://www.gamespot.com.au/Ads/gswide/hp/1x1.gif");
var scriptLoader:URLLoader = new URLLoader();
[Code]...
I am very new to Flash and I am making a little 30 second clip just to fool around with Flash.Now at the end of my film I just want everything to stop (if possible, once a specific frame is hit move to another frame.)I've heard that you could use ActionScript to perform this but I really have no clue
View 5 RepliesUsing MX 2004. I would like to play the entire movie twice, then start playing a third time until frame 30 and stop.
View 1 Repliesi want to make a puzzle..a photo seperated in 10 pieces(10 scenes)withdifferent speed.each piece does a move from right to left and back again.when i push a button in the correct frame i want to go to the next scene to do to the same thing,if its the wrong frame i want to play another scene.and is it possible to all that staff with one button?
View 0 RepliesHow would I do this using actionscript? I was kind of thinking like this:
onClipEvent(enterframe){
if(thecurrentframe=2){
stop();
}}
But I am not completely sure. hat variable would the current frame part be in??
The below function does not work probably due to the path being typed incorrectly. How can i fix it?
ActionScript Code:
function ChangeTheme(Thistheme)
{
for (i = 1; i <= 218; i++)
{
with (this["sector" + i])
[Code]...
Also worth mentioning: On each of those frames, i have defined a local variable to label the sector. the label's name will be the same as the movie clip that is visible on that frame, as described below:
Actions for Frame1 of WallNorth: fLabel = CementRoad_mc
actions for frame2 of WallNorth: fLabel = DirtRoad_mc
P.S. "Thistheme" is just a way of advancing the frame of "Cementroad" (to display the cement road as wet or dry or muddy or w/e)
Ive created a banner ad in AS 1.0-2.0. The ad can only loop 4 times then it must stop. The following code does this at frame 170. The timeline is 170 frames in length, and this code is keyframed on an actions layer on frame 170 - however, I'd like the final stopped flash swf file to occur at frame 155. I can't just put this code on frame 155 - it skips a whole section of animation (from frames 155 to 170) that I want to keep in the loops.
loop = loop + 1
if (loop < 4) {
this.gotoAndPlay(2);
} else {
this.stop();
}
the only "Home" button that works is on the "Theory" page, which is where the actionscript happens to be located(frame 76).. In other words, if I click on the "Theory" button, I'm able to return to my home page. However if I click on any other button, it plays straight through the remaining frames and loops back to the beginning.
Frame 75(nav buttons)-
Code:
stop();
import flash.events.*;
import flash.display.*;
[code]....
I am new to ActionScript 3.0. I am trying to create a button that will jump ahead to a specific frame, let the animation run, and then stop before reaching a specific frame. I have the first part working:
button1.addEventListener(MouseEvent.CLICK, buttonHandler);function buttonHandler(event:MouseEvent):void { gotoAndPlay("25");}
Once I get to frame 25, the animation will start. But I want to stop the animation at frame 49. How would I do this?
What I want to have happen is when you mouse down on the button/MC the block_mc will first jump to frame 40 and then it needs to check and stop when the block_mc reaches frame 12. I have attached a simplified version of what I was trying to do
View 5 RepliesWhat I want to have happen is when you mouse down on the button/MC the block_mc will first jump to frame 40 and then it needs to check and stop when the block_mc reaches frame 12. I have attached a simplified version of what I was trying to do
View 5 RepliesIļæ½am trying to make a timer to my hangman game, and this is the code Iļæ½have.
Code:
timer = 0;
countup = function(){
timer++;
}
countupInterval = setInterval(countup,1000);
If i would like the timer to stop on a specific frame and show the time result how do I do that?With some kind of if-else statement, or some kind of function.stop.
I'm using Flash CS4 with AS3. I'm building a website for a friend the problem I have. When a user clicks on a button I want it to play a movie clip then stop at a specfic frame. I want all the buttons to play the same movieclip but go to a different frame.
The current actionscript I am using is located on frame 1 is:
home_btn.addEventListener(MouseEvent.CLICK, homebuttonClicked);
function homebuttonClicked(event:MouseEvent):void{
gotoAndStop(0)
}about_btn.addEventListener(MouseEvent.CLICK, aboutbuttonClicked);
function aboutbuttonClicked(event:MouseEvent):void {
gotoAndStop("aboutme")
[Code] .....
This allows me to navigate to the right frame but does not play for obvious reasons, if I use the gotoAndPlay function its carries on playing to the end of the movie.
Frame 1 has an flv that it plays once and stops, here's the actions I have on that frame:stop();stopAllSounds();What would I add to make the flv loop or replay when it finishes? (I have buttons and more flv's on other frames, so I want to have this stop on frame 1 unless someone clicks a button to go to another frame.)
View 5 RepliesI am working with Flash MX and have a banner which is looping 3 times and then stops on the last frame. I have that working fine, but I have added a "wipe out" at the end and need the movie to stop on frame 164 instead of the last frame now.
View 14 Replieshow I can loop a specific bit of my movie until a specific link is clicked?
View 5 RepliesIm using the flvplayback to put up a video in my swf. in my swf i also have several buttons. the thing i want to do is when i for example click a button i want to start playing the movie from 5 seconds in it and then stop the movie at for example 10 seconds in it. even if the video is 20 seconds long i want to be able to stop it automatically at 10 seconds in the movie. the start and stop should be controlled from the button..
i know how to start the movie at a specific time but i dont know how to stop it at a specific time.