I am trying to load some external swf into my main swf file in as3.0 but the problems is it never stops loading and that causes a crash in the web browser.
[URL]
if you go to the sound tab and then click to play a song you will see that the browser never stops loading the same files.
Im working with FlashDevelop and have two main projects, all pure AS3 projects.When trying to load my second project from my main project I get all kinds of errors.The Main class of the main project extends Sprite and the Main class in the "to-be-imported" project extends MovieClip. Looking at the loading of the swf in the debug window in FD it all seems fine:
[SWF] 'pathToSwf'secondProject.swf - 410 626 bytes after decompression.
If i try to assign the loaded swf to a newly created MovieClip I get a coercion failiure:
swfContent = loader.content; // =>
Type Coercion failed: cannot convert Main@46c0201 to flash.display.MovieClip.
So, typecasting the loaded content like so:
swfContent = loader.content as MovieClip;
removes that error but then I fall into the next pit as I try to call addChild:
Error #2007: Parameter child must be non-null.
Trying to get around the issue I tried to add the loader directly into the container where I want to show the external swf. This is when the real interesting problems begin:
targetContainer.addChild(loader);
My main application now hang, restarting in a never ending loop. How can my external swf be loaded but then again be null.It works perfectly fine when I run the external swf by itself...
I have a button that when pressed goes to the next frame of a external swf file loaded into a movie clip. When the last frame of the external swf is reached, I want the button to go to the next frame of the main timeline (which in turn loads another external swf and the process repeats itself over again).
I assume I have to use an if/then statement, but what exactly is the if clause?
I have a movieclip clip that plays when the movie starts, the movieclip is a visual assets that show's that the application is loading some information but it's not showing any loading progress, just playing while the assets are loaded.I created a for loop that will load the assets using a simple loader, and then when the object is loaded the application push the object to an array.Problem is that when the loading starts all the animation that i have on screen stops until the loading is finished.The whole point is that the animation will play while it's loading.
View 10 RepliesI spent almost a week trying to figure out how to unload a currently loaded swf using its button and loading a new swf... I have three files, a main.fla, file1.fla and file2.fla. In my main.fla, I have a code which loads the other two files. If i will click the "unload" button in the file1.swf, I would like the main.fla to unload the file1.swf and load the other file, file2.swf. Here is the code to load the file1.swf:
[Code]....
[FMX] I am having trouble loading an XML file on an external server into my flash movie when it is uploaded. The data loads in fine when the flash file is on my local computer with the xml file on a server. As soon as the flash file is uploaded the XML data will not load in.
View 2 RepliesI used to do this fine with AS2 and now i'm struggling to get it to work in AS3.my code is as follows:
PW1.addEventListener( MouseEvent.CLICK,loader1 );
//==================== PS function =============================================
var ldr:Loader = new Loader();
[code].....
I have created a main "site.swf" file that loads a "default.swf" file into a container after a preloader. On this default.swf file I have buttons that needs to load new external SWF files in its place in the container. All of the external SWFs contain buttons and navigations that will also call up other external SWFs into this container. So, I would like to know how to program each button (some are movieclips as buttons) to unload itself and load the respective SWF into the container (eg. AboutUsButton to call up aboutus.swf into the container). I do not have a main navigation on the site.swf file bacause the navigation changes on each SWF that needs to be loaded into the container.
View 2 RepliesI want to load external png's through this code:
(for this code, check the mcBandPreloader in de .fla file)
Code:
var imageLoader:Loader;
var RespJpeg:String = "images/arch1Proj.jpg"
function loadImage(url:String):void {
[Code]....
Here the problem is that I can't type html in my external txt file. (I did checked the html button in Dynamic Text Properties. What am I doing wrong here?
.fla can be downloaded at [URL]
I'm loading a external swf into a movie everything is fine with that. The only problem is that its loading only a part of it. Does anybody know why? Also, this swf is a mp3 player with streaming. The streaming part works but the playback doesn't.If i start only the mp3 player by itself it's working.here is the fla for the player
View 3 RepliesI'm trying to load a SWF movie into a target movieclip called blankmc. The SWF movie is loaded from an absolute URL (eg. [URL]/img/20042005113934movie3.swf ) My Loading Progress code fails to detect the SWF file size. However the same code works perfectly for a JPG! Essentially the .getBytesLoaded() and .getBytesTotal fail to work. Why is this and how can I get it to work for loading SWFs?
[CODE]...
Specifically, I am building a flash page that loads external swf files and inside some of the external swf files, I would like to add audio and flash video (flv) streaming from the Flaash Media Server. In some of the external swf files, (using a FLVPlayback component) when you press a button on the main timeline to unload the current playing swf the audio/video continues to play after loading the new external swf file.So I believe that my approach is all wrong and I should be working to dynamically load the .mp3 and.flvs in the external swf ... my questiion is how to unload those assets when loading the new external swf
View 1 RepliesLets say I have Main.swf and sub.swf, and I wanna load sub when I press a button from Main, but sub.swf has its own external class file attached, so here is the problem, when I load sub using loader class and I would get this message from the output panel:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at subScript()
seems loader class can not access sub.swf's external class when sub is being loaded.
Lets say I have subgallery.swf file that loads jpeg images. And I have gallery.swf file that loads subgallery.swf.The jpeg images and both swf files are in the same folder.When I test gallery.swf it loads subgallery.swf but subgallery.swf doesn't load images. When testing subgallery.swf alone, it loads jpeg files.Is there any limitation or setting preventing external swfs loading other content?
View 2 RepliesI created a site using Kirupa's external .swf loading tutorial. Now in one of my externally loaded .swf's, I am loading another external .swf. I've gotten this to work fine, but the second external .swf (loaded into the first) contains buttons that will swap this second external .swf with another external .swf. I can't seem to get the AS references to the variables set up correctly in order to swap the swf's. The initial .swf loads fine, but the button control gets complicated inside it. It sounds rather confusing, so I've included a link to the .fla's and .swf's below.
[URL]
The file structure:
-band.swf load's profiles_main.swf
-The buttons in profiles_main.swf are trying to load chris.swf (swapping it entirely with profiles_main.swf)
I have subgallery.swf file that loads jpeg images. And I have gallery.swf file that loads subgallery.swf.The jpeg images and both swf files are in the same folder.When I test gallery.swf it loads subgallery.swf but subgallery.swf doesn't load images. When testing subgallery.swf alone, it loads jpeg files.Is there any security limitation or setting preventing external swfs loading other content?
View 3 Replieseverything was going fine on a website project I've been working on, until yesterday. I'll try to explain the whole scenario first, and I'll put the code in here too so anyone can try to figure out what is wrong. Here's the breakdown of the site:
1) There is a MAIN SWF file that plays an intro and then stops on the last frame with the "Main" Navigation buttons.
2) Inside the Root folder where the MAIN SWF resides, there is another folder called "swfs" which contains six main external navigation pages, as well as another folder called "galleries" which contains additional external swf files for six gallery pages.
3) On one of the layers of the MAIN SWF, there is a movie clip called "mySWFLoadingClip" that the "Main" Navigation buttons load and unload the external swf pages onto. These all work perfectly. The problem start on the next step. This is the code I used for the navigation buttons on the MAIN SWF timeline:
[Code]...
If anyone can help me figure this out I would be really grateful. This is a very important project and the deadline is coming up very soon. Please help me figure out how to load an External SWF onto the main time line and then load an additional external swf from within the first external swf. I'm stumped.
Ok, everything was going fine on a website project I've been working on, until yesterday. I'll try to explain the whole scenario first, and I'll put the code in here too so anyone can try to figure out what is wrong. Here's the breakdown of the site:
1) There is a MAIN SWF file that plays an intro and then stops on the last frame with the "Main" Navigation buttons.
2) Inside the Root folder where the MAIN SWF resides, there is another folder called "swfs" which contains six main external navigation pages, as well as another folder called "galleries" which contains additional external swf files for six gallery pages.
3) On one of the layers of the MAIN SWF, there is a movie clip called "mySWFLoadingClip" that the "Main" Navigation buttons load and unload the main swf pages onto. These all work perfectly. The problem start on the next step. This is the code I used for the navigation buttons on the MAIN SWF timeline:
var Xpos:Number = 0.0;
var Ypos:Number = 0.0;
var swf:MovieClip;
var loader:Loader = new Loader();
[Code]......
how to load an External SWF onto the main time line and then load an additional external swf from within the first external swf.
Can I edit it if I buy the application?I would like to know how i can gain control of this file type.
View 1 Repliesi have an index page (html) that contains an swf and a hyperlink. the hyperlink is set to skip the intro swf and open the main html page. there is no problem there. what i have been trying to find is an event listener that waits till the swf is finished and then goes to the main.html. i found an example that does what i want, but instead of opening a url it uses trace and shows me a message.
import fl.video.VideoEvent;
function showMessage(e:Event):void {
trace("Finished");
[Code].....
i need when a flash video ends redirectme to an html i use Flash CS3 in AS3, i impot the video in a fla document and make a swf to put in html, i can se perfect the video in the web but i dont know how to redirect to and html.
View 5 RepliesI am creating a touch screen interactive for a museum. I have a AS2 button opening a AS3 swf file popup (no html). This AS3 file shows a movie.How can I get the pop-up to close down when the move has finished without the use of a button.I have a button option too.The movie is an FLVPlayback obviously linked fro an FLV file. (so only 1 frame is showing)This is the only thing I can't work out. It's the last thing on the project.
View 9 Replieshow can I detect when the transition ends?
ES this transition: import mx.transitions.*; import mx.transitions.easing.*; mx.transitions.TransitionManager.start(_root.SerieGranitogres.Superfi ci,{type:mx.transitions.Fade, direction:Transition.OUT, duration:0.5, easing:mx.transitions.easing.Strong.easeOut});
I need to add several copies of a movieclip at random times. When each clip plays out I need it to be removed. What I'm trying is the following:
var list:Array = []
addEventListener(Event.ENTER_FRAME,
function(e:Event){[code]............
The first script is working but the last one is not. How should a movie clip instance remove itself?I'm used to AS2 where it just requires this.removeMovieClip(). I've tried to search for an equivalent in AS3 but can't find
Which is the easiest way to detect when a child movieclip is ended ? use a variable in the parent movieclip?Does exist a sort of method myMovieClip.isEnded() ?
View 3 RepliesI'd like to remove a MovieClip instance from the main timeline (and do a few other things) once that movie is over.
Scenario: I've got a frog catching a fly with his tongue. Once the frog-tongue movie clip is over, I want to remove both the tongue, and the fly from the timeline. Both the tongue and the fly are MovieClip objects. The tongue animation starts based on a TimerEvent. I'd like to say something like: when the tongue MovieClip ends, call removeChild() on tongue and fly.[code]...
I have a mc with a button to start the animation. User will press the button, mc will play once. Now, how do I advance the main timeline once that mc ends? Right now everything is on frame 1 in the main timeline... frame 2 is where I want the menu etc to appear. I am using flash cs3 and as3.
View 9 RepliesI put my monster MC to container_mc which is on the stage with AS and after monsters animation has ended i want to remove it from the container
View 0 RepliesI am having an issue when loading a dynamic text. Here is the code I'm using
Ext_text = new LoadVars();
Ext_text.onLoad = addText;
Ext_text.load("ArtText.txt");
function addText() {
Art_Text.htmlText = this.ArtText;
}
This does load the file but If there are any & or % in the .txt file it stops the text at that point.
I want to be able to know when a certain movieclip animation ends (Flash MX).For example: The players character shoots an arrow, while the arrow animation is on - the players character can't move when arrow animation ends - the players character is free to move again.
How do I do that?I've tried putting some AS in the last frame of the animation (letting the application know that animation has ended) but once in a while this AS doesn't execute - maybe Flash drops some frames (and that frame among them)?Do I have an event for movieclip ending (Flash MX)?Is the only way is to use timeouts (setInterval)?