ActionScript 3.0 :: Playing Few Flv's Synchronously?
Feb 26, 2012
I've a few (eg. three) image sequence animations. One of them is a base, and the others have an alpha channel. I'd like to play them in flash at the same time with overlapping them one on another (base on bottom and the sequences with alpha channels above). I've converted them into flv format with alpha channel (using after effects) and loaded using AS3 one above another. Unfortunatelly i can't play them synchonously. Each of them is loaded by its own netstream, and i don't know, how to play them synchronized. The animations are played with no equal speed - what is obvious in the case of lack of synchronization.
The animations have to be choosen from the set of several animations using some other UI - that's the reason of the mess. I do not insist on the flv format, but it seems to be good choice for this purpose. The lenght of each animation is 300 frames. All of them has the same size.
Is the method of synchronize two flv files? Or maybe such applet has to be done in some other way?
View 3 Replies
Similar Posts:
Nov 17, 2010
In my AIR app, I have a list of file that needs to be downloaded from remote server. I want to make this download happen sunchronously. [code]...
View 1 Replies
Jul 16, 2009
I want to store some test data for a FlexUnit test in small XML files in my Flex project, and access them trivially for the flex test. How can I load these bits of data synchronously? HTTPService is the way I'd be loading them _a_synchronously, but adding event handlers to my test cases seems like a bit of overkill.
View 2 Replies
Nov 4, 2011
How can I load a group of Images and do something AFTER all of the Images have been loaded?
Furthermore I think they have to be part of the stage, to fire events, right?
I mean... I cannot simply create them, load the iamges and then add them to a Group just present in the interface... I have to add them to the Group BEFORE I load the iamges if I want to be able to handle the complete event, right?
View 3 Replies
Oct 1, 2009
I see the benefit of asynchronous commands (waiting for server responses...) but in my flex app it creates me more problem than anything. Here's what I want: EVERY command executes only after the previous one returned (to result or fault function) And I'd like to do this as easily as possible.. by the way the GUI must become irresponsive (maybe a wait message) while a long command is being executed (I could show the wait message in the execute function and remove it in the fault or result function..)
View 1 Replies
Oct 22, 2011
I have a var that holds the String value for the path to an image. How can I use that to get the ByteArray from that image synchronously?
View 1 Replies
Jun 24, 2009
Is there a way to make event flow occur synchronously?
Basically this is my scenario. I have a single method call that gets triggered by a server request. I want to be able to notifiy subscribers that the method has/is executing so that they may return a result. By modifying an attribute of the actual event object, the method can return that result to the server dynamically. Eg:
Code:
//method invoked by server
public function whatever(...parameters):* {
var event:MyEvent = new MyEvent(MyEvent.TYPE);
[Code]....
This code works around 70% of the time, but sometimes I see things are really happening asynchronously in Flash Player's event flow. Is there anything I can do to regulate this and make sure it happens synchronously?
View 4 Replies
Aug 12, 2009
I am using an component, and currently have a dataProvider working that is an ArrayCollection (have a separate question about how to make this an XML file... but I digress). Variable declaration looks like this:
[Code]...
View 1 Replies
Nov 12, 2011
I am using an component, and currently have a dataProvider working that is anArrayCollection (have a separate question about how to make this an XML file... but I digress).Variable declaration looks like this:
[Bindable]
private var _dpImageList : ArrayCollection = new ArrayCollection([
{"location" : "path/to/image1.jpg"},
[code]....
View 4 Replies
Nov 13, 2010
I have a sound clip that I'm loading externally into my flash file. The code I'm using looks like this and is placed in the as layer on the first frame,
var mySound:Sound = new Sound();
var myChannel:SoundChannel = new SoundChannel();
var myTransform = new SoundTransform();
var lastPosition:Number = 0;
mySound.load(new URLRequest("introaudio.mp3"));
myChannel = mySound.play();
[Code]....
View 14 Replies
Dec 4, 2011
I am using AS2 in CS5.5.I am creating a project for a class that introduced me to adobe flash. The issue is I have gotten to a certain point about 15 scenes. During say the 15th scene scrolling through the timeline animations works fine, playing it on test scene works fine. When I go to play it on test movie it stops at a certain point. At first I thought it might have been a misplaced stop action but there is none to be found. The weird part is every other scene I create after that continues to freeze as well, the images are there, but the animations won't play. All my previous animations play before those with the issue, it's justThese new ones won't play for some reason in test movie, but work completely fine in test scene and the timeline.
View 4 Replies
Aug 7, 2009
I am loading an external SWF file into my main timeline. The external SWF file contains an FLV video. At a certain point in my main timeline, the SWF file loads and plays the video. Is there a way to say...
If the VIDEO (FLV) is done playing, gotoAndPlay(X)?
View 4 Replies
Oct 9, 2009
I was wondering, what was the best way to for actionscript 3.0 to detect cuepoints playing from a FLV movie that is playing from an FLV playback component?
View 1 Replies
Aug 31, 2009
I have some animation (programmatic, I'm NOT using keyframed animation in timeline), and some music I want to play in the background. Once the music file reaches the end (about 30 seconds long), I want to trigger the end of the animation functions.I figure I could either use an actionscript timer to trigger the end of the animation or a keyframe with actionscript that is placed on the timeline near the end of the song but these methods assume knowledge about the duration of the wave file. If I changed the framerate or updated the external wave file, these triggers would possibly no longer sync upIs there some sort of event listener or other detection method for an audio file to signal it has finished playing? Or maybe there is a way to get the duration of the audio file to use in the timer
View 3 Replies
Apr 10, 2011
I am creating a game that has 6 movieclips all on the main time line of the game. Each movie clip has three buttons that when clicked plays, pauses or stops a sound clip.When I press any of the sound clip play buttons that sound starts playing, the problem is when I click any of the other sound clip play buttons those sounds also start to play. Is there a way I can disable the other sound clip buttons while the current sound is playing then enable all of the buttons when the current sound has stopped.
This is the code that creates one of the sound objects
[Code]...
View 3 Replies
Oct 3, 2009
So I made a few buttons with sounds within them and when I publish it they work just fine. But what I want them to do is;
Say I click a Button.The sound starts playing.Then I click it again, before the sounds done playing.I want it to stop the playing sound and start playing the button I just clicked on, whether it be the same button, or a different one.Right now it just ends up sounds like an echo because it'll play it as many times as you click it.
View 2 Replies
Apr 13, 2010
The problem I have is I click the play button and start playing. Then I click next and when I click play for another song the songs overlap. How can I stop whatever song is playing and start playing the new one? Has to stop the prev song when I click play_brn.
[Code]...
View 2 Replies
Dec 6, 2011
ok so i have a button that plays an animation for fire when held down. and when realsed goes to and stops and frame one. when it reaches the end of the time line it goes to and plays at frame 10 and goes back to the end of the timeline. I have a sound for the fire animation that plays for the effect. The problem is the sound keeps going untill its over even if the button isnt held down. and when the playhead reaches the end of the timeline it goes to and plays and frame 10 and it replays the sound. if i hold it down it will just keep playing the sound over and over from start to finish. what i want it to do it when i hold the button down i want it to play the sound and when released it stops the sound where ever it is at. I also dont the sound to play again if there is a sound already going to stop it from playing 20 sounds at one time it gets loud and you need asprin after about 5 seconds of that.
View 2 Replies
Mar 23, 2007
I am learning how using flash is like using legos. if you have two eight hole pieces, and you put them together using only two holes, the lego structure will not be as strong or work so well. seems like you have to cover the entire basis (put all eight holes into the eight pegs) for the program to work, and I am reading the help section for this, although if anyone knows of some good books that hold valuable knowledge and wisdom, I would certainly like to know about them, as I am dedicated to learning flash.
I have 1.swf, that in order to get it to operate as I have programed it, I must play it in the flash player. Playing it in Flash Professional does not work in its entirety because of conflicts in the enter key's duties. The 1.swf works as it should when played in the flash player outside of Flash Professional MX 2004.When I am loading 1.swf into presentation style 2.swf, and then play 2.swf in the Flash Player, the key board functionality of 1.swf (most specifically the enter key) does not operate as the 1.swf Actionscript 2.0 defines. I have created a projection file as well, to see if there was any other behavior that might occur, but the result were the same. Here is the section of the code dealing with the keys:I have tried separating the different if(Key.isDown(Virtual Key Code) statements into different keyboard listeners, but to no avail.If in order to solve this issue - if the kind Kirupian reading this stuff needs more
code, let me know, as I'll have the rest of the comments finished shortly.
//1.swf is loaded into a empty MC from within 2.swf.
this.createEmptyMovieClip("a_mc", 0);[code]
View 1 Replies
Feb 9, 2009
I want a scene to play for 10 seconds before playing the next scene and have no idea how to do this using script (action script 2). I know I can just extend the timeline out so it takes 10 seconds for the scene to play through, but I'd prefer to do it with script.
View 5 Replies
Jul 1, 2009
I am using a mac, and Flash 8... I am making things that include motion and shape tweens. My shape tweens work fine in the swf file, however my motion tweens (fading of text) do not work. The text just appears abruptly instead of having the fading affect. Also, I am using verdana text, and instead of appearing thin and narrow, it appears really thick and bold. I cannot work out why this is, as everything works fine in the actual flash project itself...
View 1 Replies
Apr 20, 2009
not got my earlier problem sorted yet (about the title contuing to loop) but have another question now! ive managed to get an audio clip into my page complete with play and stop buttons. the audio is dynamically loaded
id like to put video in and have an flv video to use. id like to dynamically load it so keep the overall file size down and have navigation buttons for the user using actionscript 3 but not sure how to do this. looked around online and getting increasingly furstrated!
View 4 Replies
Sep 2, 2010
Im making an animation and in the 3rd scene i have a deer that screams and the sound plays way to early. I had to drag it out way past the frame where it opens its mouth for it to play at the right time.
I have no idea whats wrong this has happened before. I really dont want to have to guess on where to put the sound for everything a character says.
View 2 Replies
Jun 15, 2009
I have some movieclips that play when you hover over them and rewind when you mouse out. Now I've added a click event to the MCs also and now the first time you hover over them, nothing happens. But the second time works just fine.The MCs that don't have the click event work fine using the same code.URL...
View 7 Replies
Jul 29, 2009
So I have a still image covering a video so that when it's pressed it disappears and the video plays. I get no errors for the code I'm using, but when I preview my site nothing happens when I click the image.
The code I'm using is:
import fl.video.VideoEvent;function doPlayVid(e:MouseEvent):void {tanmov.play();tanbtn.visible = false;}function doStopped(e:VideoEvent):void {tanbtn.visible = true;}tanbtn.addEventListener(MouseEvent.CLICK,doPlayVid );tanmov.addEventListener(VideoEvent.STOPPED_STATE_ENTERED,doStopped);
View 12 Replies
Sep 21, 2009
My site works perfectly when played locally, but now that it is on a test server my swf has disappeared. The swf is an empty shell in which an xml file is played. I have encountered this before and have fixed it, but I cannot find where my code is wrong this time.
[URL]
View 2 Replies
Nov 16, 2009
I am developing a SWF player. The application plays SWF instead of FLV. The SWF, that has to be played is a simple static movie. The application requires SWF to be played while it's being loaded just like FLV's get played.
Now, Is there any way to play SWF file while it's being loaded??
View 4 Replies
Sep 12, 2011
I am working in Flash CS4 and am having an issue with my animations. I create a simple tween and press the enter key to play the animation but it does not play. Instead the enter key just toggles the timeline scrubber on and off. When I play the SWF file there is no animation either. If I manually scrub through the timeline the animation appears to be playing correctly. I am simply placing a box on the stage and moving it from left to right using a classic tween. I have tried shutting down and restarting my PC but that does not work. This just started today and was working fine up until today. I am unaware of having made any changes to preferences or anything. I have reset the Essentials view but it is still not working. When I hit CTR ENTER I can step through the frames one by one using the . and , keys on one of the animatioins, on a second one when I step forward a frame the box I am using disapears.
View 3 Replies
Nov 23, 2009
i have created a action script 2.0 file which is a simple banner animation. the swf file plays in all browsers except for ie6. when i tested on my local machine it worked however after i hosted to my webserver i am not able to see the swf in ie6 only.
after creating the banner i used dreamweaver to insert the swf file which generated AC_RunActiveContent.js file in a Scripts folder with the following code
Code:
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
i have created Scripts folder on my webserver and copied AC_RunActiveContent.js file to this folder
View 2 Replies
Sep 21, 2009
Back to my nightmare project, I've embedded sounds in the project that play based on certain user actions. They play fine for me (PC), but my customer is telling me they don't work for her (Mac).Would there be ANY reason a sound would play on a PC but not a Mac?I've told her to update her Flash player to make sure it's current and to make sure her speakers are on and the volume is up, but no sound.Okay, the REAL reason this isn't working is user error based on everything else I'm told that's happening and not happening, but I need to cover my bases and see if there really may be a reason sounds won't play on a Mac.
View 3 Replies
