take a look at the attached files? I've got two preloaders that I've made from the same template, but I can't get the progress to show. It simply shows a quick glimpse of the finished image and then goes to frame two.
View 1 RepliesI am trying to make a preloader in AS2 for my website in Flash CS4 but every tutorial I have tried hasn't worked, everytime i try simulate the download it waits until the whole movie is downloaded then views it, however every example fla file that i download works fine even when simulate .
View 2 Repliesmy preloader isn't actually working,trying to load the page on a PC with quite slow internet... The story is following - my preloader animation plays, but only after the whole movie is loaded, cuz I noticed a huge delay before the preloader was actually played... And then I used that flash speed testing thing (sorry, but I don't know how it's called) and it proved my theory... That's the code on 1-st frame, where preloader is:
Actionscript Code:
stop();var loaded:Number = getBytesLoaded();var total:Number = getBytesTotal();var percent:Number = Math.floor((loaded*100)/total);if (loaded == total){gotoAndPlay (2);}else{ _preloader.gotoAndPlay(percent); //loadBar.percentage.text = percent;}[code].....
So, I'm working on a presentation/site that houses multiple sections being loaded in as individual swfs. I have each section shoot to a preloader frame first that is set (with PreloadAssetManager) to preload multiple FLVs and the SWF itself.If I select a new section while the current one is loading, it does the correct process of switching sections and shooting back to the preloader, but then the preloader itself just stops working completely. If I try to access any section, it just sits at a blank preloader. of thing.
View 1 RepliesI export all my stage assets to frame 1, so the external preloader FLA is the approach I've been using for a while to show the nice percentage before the real SWF is loaded. I've just finished with a project and I'm getting errors when the file is done loading.The file works fine as long as it's not it a Loader component (stand-alone SWF), but as soon as I try to get it in the preloader it gives me a ton of errors.
The only major thing I did differently with this project is that a number of classes have their own individual Event.ENTER_FRAME listeners and that *I'm making a lot of stage calls* from various classes to get locations and what-not. I'm thinking it might have something to do with the latter, since I used the stage width/height for a lot of the positioning (stage.stageWidth/2, stage.stageHeight/2, etc).
I've got a strange problem with my new flash website. I've been able to code a preloader for loading in different .swfs into my main .swf file. This works fine locally and even when I simulate the download in Flash. But when I've uploaded it to my website the preloader no longer works. Basicly the swf file does load into the current swf but without the loading bar and percentage reading.
stop();
_root.homecontent.loadshowreel._xscale = 1;
_root.homecontent.onEnterFrame = function() {
[code]....
I am working on a website and I would like it to have a preloader.This website is scripted using Flash CS3 and AS2.There are two scenes, one is "preloader" the other is "tsh".roblem is, the swf file does not display while it loads, then after it loads it displays the preloader for a second and jumps right into the next scene. How can I make it load the preloader scene first, then preload the "tsh" scene? - I have put this code into "preloader"Frame 1:
Code:
var loaded:Number = Math.round ((_root.getBytesLoaded()/_root.getBytesTotal())*100);
mc_slider._x = -500 + (loaded*5);
[code].....
i tried to load an image into my stage. with clicking a button so i put actionscript for the button as such :on (release)[code]but the loader is not working the % which has to count to 100 then show the picture doesnt work and the picture appears with out loading..
View 5 RepliesI have a preloader.swf file that contains a preloader animation. I'm using the following actionscript code to make it work:
Code:
var loader_mc:MovieClip = new Preloader();
var loader:Loader = new Loader();
[code].....
I'm working on a glorified slideshow, it has a music track that is 3+ minutes long, pretty nice graphics, and transitions. I started builing in Flash and am halfway done... it looks great too !
Problem is, when I'm testing the preloader with the download profiler set to DSL - it crawls and at 1% and on, the soundtrack starts to play... by the time the download is at 42% its at least a minute into the soundtrack and it's in and out, coming on then cutting out but not starting over. Needless to say, this is not okay! I know it's a huge file. SHould I maybe export it as an mov and put it in a FLV player?
I've made a basic RSS news feed widget with a preloader. When I test the preloader in Flash it works fine, counting to 100% and bringing in the widget proper at the end. This happens both if I test the movie outright or simulate the download.
But now I've embedded the preloader in an HTML file using swfobject 2.2, and the browser will only display the first frame of the preloader and go no further, ie it 'freezes' at 0%. When I open the actual preloader .swf file, it's the same - it just stops at 0% even though it worked fine previously when
I exported it from its .fla file.Weird thing is, if I bypass the preloader and embed the widget file in my HTML, it works fine. This is for an assignment however, and I need to build a preloader as part of the criteria.All files (ie the widget .fla and .swf, the html and the preloader .fla and .swf) are in the same folder. Someone advised me when I made a bitmap in the preloader into a movie clip to uncheck the "export in frame 1" box, so I did this. It didn't work. Then someone else advised me to make sure the textbox containing the percentage count was a classic textbox with dynamic text. I did, and it's still not working.
[Code]...
I've implemented an internal preloader in my project but it's not working properly. I use Simulate Download but the preloader only shows after something like 80% is completed, which sort of destroys the purpose of the whole thing.
import flash.events.ProgressEvent;
stop();
function preloader(progressEvt:ProgressEvent):void{
var totalBytes:Number = progressEvt.bytesTotal;
var loadedBytes:Number = progressEvt.bytesLoaded;
[Code] .....
I have a preloader bar which I get no errors on but when i publish on the web it does not work and it does not appear to work when I use the "simulate download feature" of flash cs4.
Code:
stop();
addEventListener(Event.ENTER_FRAME, preload)
function preload(e:Event):void {
[Code] .....
I have been on a hunt for weeks, on and off, but I can't seem to find a solution, or even a direction to look in. Long story short, I am using CS4, AS3, and I can not get any type of preloader to work when accessing it online. I have made my own, tried every example file I could find, but not one of them or the possible solutions I found for them will work.
The example files I have used all work from my computer, both by accessing the swf in a browser, or testing within Flash itself, but once I upload them they have all hit one problem or another. I have had the preloader not show up at all, and show immediately but not count down, depending on the type of preloader it is. The only amount of narrowing down I have been able to do is that I can make a preloading frame, but as soon as that frame tries to find out the % loaded of the overall movie, it stops working properly.At the moment I am simply using:
Code: Select alladdEventListener('enterFrame', preloader);
function preloader (e:Event){
if (framesLoaded == totalFrames){[code]...
I put a movieclip on the frame to show that something is happening, but I have not been able to successfully use code to allow for a loading bar, text %, etc.
I have a problem with a preloader that isn't working, it works fine on other files that are loaded in the same way on the same site, the only difference with this file is a script that is at the end of the timeline which uses attachMovie to place some images.. the result is that the preloader doesn't show, there is just a wait and then the movie appears suddenly.
[Code]...
I have searched and searched and can't seem to figure this one out. I have a preloader for each of the images (loaded with XML) in my gallery. I'm trying to get the percent to show up. I got fed up and deleted the percentage part of the preloader it all together... But now I really need one in there. Does anyone have a clue how to code this? Here's the AS for the preloader bar I have so far:
Code:
this.onEnterFrame = function() {
filesize = container.getBytesTotal();
[code].....
i have a dynamic preloader i'm working at that seem to give me problem, here the coding
Code:
loadPage(section,1,10);
//
function loadPage(sectionID, startID, endID) {[code]....
i think on this following line is not working, because when i trace the value, it only give "4"
Code:
var loadedBB = _root["tn"+i].holder.getBytesLoaded();
the images is loading, the problem seem to lies on the preloader only,
I've got two preloaders that I've made from the same template, but I can't get the progress to show. It simply shows a quick glimpse of the finished image and then goes to frame two.
View 2 Repliesi tried looking here with the keyword 'preloader', to find answers to my problem but I didn't.I'm a freshman AS3 developer....with a portfolio site to launch asap.
I have a movieClip in my library that is exported to AS (external jpg) - it is loaded separately from anything else in my scene (which is disrupting my normal preloader animation). When I simulate the download my preloader doesn't appear in my preview window, and I have no error message either. At first, not sure what the problem was I tried various preloader tutorials online hoping to find a solution.
I only realized later on that my preloader didn't work because of my external jpg.How can I make my preloader (code below) load everything altogether? (elements in my scene + external jpg)
PRELOADER (first frame);
Code: Select allimport flash.display.MovieClip;
import flash.events.ProgressEvent;
[code]...
I am making a preloader for a 360* product viewer and i'm having some trouble. the preloader works fine and when placed by itself loads the second the page requests it. but once i put it in my .fla project something causes the preloader to not load. and instead starts playing once the file is completely downloaded.
there are only two frames. the first frame just has the preloader movie in it. the action code for the preloader movie is:
Code:
_parent.stop();
this.onEnterFrame = function() {
if (_parent.getBytesTotal()>1) {
[Code]...
A loading bar for my portfolio website is not working at all. Although the same loading bar will work on other Flash projects.After doing some research I have found that loading in MovieClips from the library may be the cause of this. So instead of loading them in from the library, i am now loading them in externally but the problem still persists. how can i un-embed the font? [URL]
View 1 RepliesUsing CS4 Actionscript 2.0
[Code]...
Check out what happens after percentage loaded. It just goes to Frame 1 of next scene but doesn't play it.... although if you right click and click PLAY it will indeed play it.. How to get it to start upon 100% loaded?? I SHOULD NOTE that the scene that won't play has an embedded FLV in timeline
I am trying to make a preloader, althought it loads just fine the preloader bar wont move, better: the filesize against the loaded bytes does not let it move.
Code [URL].
I made a flash file with buttons that go here and there and everything was fine except it takes a while to load so i added a preloader and suddenly the compiler is throwing the following error:
[Code]...
It's me again Ysong. I have a problem regarding PRELOADING.
MY TIMELINE: First frame dynamic text which is my preloader with AS3 in it. NO MORE OBJECT in the frame only text which is dynamic.
[Code]...
I have a lot of graphics and sounds in my library that are exported for Actionscript in Frame 1. I believe that because of the exported graphics, my preloader will not work. All I get is a white frame while the movie loads. How can you preload graphics that are exported for Actionscript?
View 2 RepliesI'm currently trying to work with flixel library via Flash IDE.
Everything is okay except the preloader - it just doesn't work.
I suppose the flash IDE does not support the directive [Frame(factoryClass="Preloader")], which flixel uses when being compiled in flex builder to create a preloader.
Any way to get the flixel preloader working with ide (without modifying flixel sources)?.
Code:
import flash.display.*;
import flash.events.*;
import flash.text.*;
[code]....
My Problem is getting a preloader to work In AS3 code above, loading in media_player.swf from the same directory.
I know someone has had this problem. I used Lee Brimelow's preloader:
http:[url]..........
ActionScript Code:
//Import the required assets
import flash.display.*;[code].........
In Safari, and firefox, this works fine. However, in IE, the preloader never moves past the first screen. See here: http:[url]...........
I then noticed, If I right click on my flash player settings, and turn the "Loop" option off, and then hit play, it works fine. Is there a way to fix this or turn off the loop mode that is auto checking itself? It appears that my movie does go to frame 3, and then directly back to frame 1, in which it stops, leaving the grey preloader bar at its final resting place, but not moving forward to frame 3 like it should. I added a stop action to frame 3 as well, so not sure why it is moving past that frame, and back to the beginning.
I'm in a bit of a pickle and can't sort my way out. I'm loading an external swf that has a preloader on Scene 1, and the main content on Scene2. While the content on Scene 2 centers nicely, the preloader content refuses to do so.
Here's what I've got on my main project timeline:
Code:
mcHMI.onRollOver = function() {
this.gotoAndPlay("over");
} mcHMI.onRollOut = function() {
this.gotoAndPlay("off");
[Code] .....}
As mentioned, the swf loads just fine and stays centered at any resize. The preloader will jump to another position when you resize.