Using CS4 Actionscript 2.0
[Code]...
Check out what happens after percentage loaded. It just goes to Frame 1 of next scene but doesn't play it.... although if you right click and click PLAY it will indeed play it.. How to get it to start upon 100% loaded?? I SHOULD NOTE that the scene that won't play has an embedded FLV in timeline
I have a play button on one layer and an actions button on another layer. Im using Actionscript 3.0. im trying to make it so when you click the button it takes you to the next scene but when i test it it just flashes the button and goes straight to the next scene. :/Here is the code i last tried but i have tried about 20 different things so far:
stop();
base_btn.onRelease = function() {
gotoAndPlay("Scene 2");
}
I want to upload the .fla but i dont know how to get the file size small enough. I read the post were it said to just delete the images from the library but it didn't replace anything with red shapes
this is how i attached the sound in the main swf, im using AS2
Code:
var x:Sound = new Sound();
x.attachSound("soundtracky");
x.stop();
x.start(0, 0);
I used the loader and the progress bar components.
The loader loads the main swf fine but the music doesnt play like this.
if I preview the main swf the music plays but with the loader it doesnt.
my first attempt worked with the preloader but by inserting the mp3 straight in the timeline.. I cant use it like this because I also need a mute button and I didnt find a solution.
I can get by and make nice flash sites, but I'm still learning what goes where and am still borrowing code to get by.I've laid the problem out in some detail as I am sure that will save a lot of questions later on, but feel free to ask if you want more info.Problem is as follows: I've built a two scene flash site using open source code for the preloader scene:[code]The main scrolling menu scene works great when it's a one scene movie and the preloader code works fine with a load of other sites I've built, but when I put them together on this site (the code for the scrolling menu precludes the addition of a preloader directly into that scene so separate scenes are a necessity) everything goes to pot.When testing the site (both as a standalone SWF file and when embedded in an HTML file) the preloader works fine and the main scene appears correctly, but when you click on any button to move back or forth along the menu/timeline it jumps and jerks along very roughly and stops short of its designated point.
This causes the whole scene to fail as the designated timeframe for each button contains a movie instance that won't function until the specific timeframe is reached.It's odd behavior and I'm stumped as both chunks of code work fine separately.I've even tried a much simpler preloader that doesn't display percentage or anything, it just cycles between frame one and two until the movie loads and then plays it (just like this one, but with no bells or whistles).Unfortunately my lack of actionscript knowledge prevents me from even finding a simple term to sum up the problem so I've failed to find any similar issues on any forums or Google.
I have an eventListener on a particular movieClip that triggers the timeline to play when clicked. This should play through a short tween, then hit another piece of actionscript in the last frame of that scene, which should take you to the next scene. I also have an audio file loaded into a soundChannel, as well as a few timers that operate a click prompt over the movieClip already mentioned. My bug is that if you click on said movieClip before the soundChannel is finished playing, all functions properly. However, if you wait for the sound to finish, this initiates a few timers that cause a prompt to fade in, telling you to click on the movieClip. If you click on it, still, everything works fine. But once the timers complete their work, and the click prompt fades back out, the tweens do not operate properly. If you then click on the movieClip, the timeline seems to play doubletime until coming to a stop() action in the next scene.
[URL]
jumping from from scene to scene once the play head reaches the end in AS3? Scenes do not play one after another like they used to. Below is some code I found that works with errors, however I'm not using a MC like the code displays "mc1". Not really sure on how the MC fits in? import flash.display.Scene; var scene:Scene = mc1.currentScene;trace(scene.name + ": " + scene.numFrames + " frames");
View 4 RepliesI need the video (scene 1) after play & stop will automaticlly go to scene 2. The scene 2 is a rotate images and will stay all the time to rotate in scene 2.
import fl.video.VideoState; import fl.video.VideoEvent; var foo:ExtendedFLVPlayback = new ExtendedFLVPlayback(); foo.skin = "SkinOverPlayMute.swf"; foo.startMuted = true; //set this to false, or not at all to start it unmuted foo.source = ""; foo.autoPlay = true;
[code]......
I'm having trouble getting any sound to play in my second scene. I'm using actionscript in the first scene to fade in the music, then fade it out after they click the button.
Here's the code on layer 1[code]...
Problem: I tried adding a sound to the stage in scene 2 but nothing plays when i test the movie, expect for the music in scene 1. I tried creating another sound object in the first frame of scene 2 but i get the same result.
So this is my code so far:
on (press) { // Gives your movie a button functionsgetUrl("http://www.astahost.com");}
on (rollOver) {this._alpha=100;gotoAndPlay("Scene 2"); }
[Code]....
when i play the movie, it plays scene 2, however, scene 2, which is in my flash document, plays automatically. how can i stop this? is there some code which only makes scene 2 play when called for and not play automatically.
I have an Actionscript coded flash file which run perfectly without any error. I am not getting why it shows an error after i do insert a scene before or a frame before the current frames;
[Code]...
Adobe Flash CS3Action Script 1.0 & 2.0 Im just almost done with my site. Just put in a preloader in the 1st scene of my site, and this is the script I put in:
[Code]...
I put an actionscript to make a "matrix effect" on the timeline, but it won't stop playing. It's just repeating over and over again. Even when I'm going to a next frame. Is there a way to stop the script from playing?
This is the code from the "matrix effect":
for (i=0; i<=463; i++) {
_root.attachMovie("digit","digit"+i,i);
this["digit"+i].the_depth = i;
}
[Code]....
Reference Site: [URL] Also see attached source file.
I've just built my first preloader, and the first time loading it, it works great in Internet Explorer 8 (with latest flash player), but on reload or on reopen of browser, it doesn't autoplay the second scene (main scene). Works great in Firefox and Chrome.
I've searched the internet up and down with no luck on solving this problem.
Here is my ActionScript 3.0 for the preloader:
[Code].....
I am using flash cs3. I created my preloader in a separate scene. calling the scene I want. what I wanted was the preloader to load and play the all next scene, where I have my core website running.
it works fine till one point! here is my drama it loads the scene I want, but it gets stuck in a loop.
[Code]...
I have my game on Scene 1, and my preloader on a separate frame. The preloader loads, but it doesn't advance to the game when it's complete. Where to look for my error?
Code:
class preloader extends MovieClip {
var amount;
function onEnterFrame() {
amount = ((this.getBytesLoaded() / this.getBytesTotal()) * 100);
this._xscale = amount;
if (amount == 100) {
_root.gotoAndPlay("Scene 1");
}}}
I have a preloader on a 'Preloader' Scene and want it to load my site on another scene called 'WholeSite' when it reaches 100%. My WholeSite has 184 frames. I am really getting confused with the script here.
[Code]....
I made a little slideshow with a few images in a seperate scene in my site and I exported each image/mc in the first frame and it still waits till everything loads till it plays
View 3 Repliesi'm trying to build my preloader, my flash movie has large sounds to make a selection of music but the sounds loads in the first scene even if they are attached in the second one.
My flash size is about 762 kb and some 756 kb are in the first scene(such as sounds), this is the problem because my preloader starts function when they are 756 kb loaded and only works for the final 6 kb.
[Code].....
I am trying to link to scene two. Action script three. from what I have read this is the code needed, doesn't work though
[Code]...
I am using the following code to load .md2 model in a scene using Papervision3D 2.1.932.
_md2.load(MD2_FILE ,new BitmapFileMaterial("./assets/dragon.png"));
scene.addChild(_md2);
By looking at the trace log, the texture is successfully loaded and so is the mesh.
INFO: BitmapFileMaterial: Loading bitmap from ./assets/dragon.png
INFO: Parsed MD2: assets/dragon.md2
vertices:294
texture vertices:262
faces:582
frames: 200
I can't understand why the object isn't visible in the scene.
i am putting a preloader in a seperate scene in my flash movie.for some goofy reason, it will go to the preloader and get to lik 99% and stop, and will not proceed to the next frame. i have tired EVERYTHING that i know to make it work, but it will not.[code]it is placed on a moive clip that retains all the text and graphics for the preloader.like i said the only thing that won't work is that it will not proceed to the next frame.i have replaced the _parent, to _root. i have used frame labels instead of ("Scene 2", 16). i have no idea what else to do.
View 14 Repliesi would like to have a preloader run in a movie clip rather than in the main scene...http:[url]....i have followed this tutorial exact and it works when i create it on the main scene,but the loading bar and text doesnt work when i build it in a movie clip.
View 6 RepliesI have an ordinary button and I have a little movie of an axe crashing down on the button when it is released. Once released what I want it to do is FINISH the axe chopping down THEN start the specified scene. the problem? the movie of the axe doesn't complete before the selected scene starts.
[Code]....
i got this script out of a flash MX book but it doesnt seem to be working. i'm trying to create a preloader with a simple status bar that loads a scene within the same file. the scene does end up loading. but the status bar just says "100% completed" the whole time its loading the scene. is there a flaw in the script or an i doing something else wrong?
[Code]...
i got this script out of a flash MX book but it doesnt seem to be working....im trying to create a preloader with a simple status bar that loads a scene within the same file. the scene does end up loading....but the status bar just says "100% completed" the whole time its loading the scene. is there a flaw in the script or an i doing something else wrong?
onClipEvent(enterFrame) {
loaded = _root.getBytesLoaded();
total = _root.getBytesLoaded();
ive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
[Code]...
I have a scene wich is kind of truth or dare game. This is my timeline:
This is the code of the action on frame 2:
truth.addEventListener(MouseEvent.CLICK, clicked2);
dare.addEventListener(MouseEvent.CLICK, clicked);
function clicked2(event:MouseEvent):void
var oneArray:Array = new Array("What was the most embarrassing thing that happened to you at a grocery store?", "What was the funniest thing that happened to you at a mall?", "Describe three things you like about yourself.", "What is the best thing about your life right now?", "What is your favorite kind of music?", "If you had to choose between being in a choir and being in a play, what would you choose?", "What is one talent most people here don't know that you have?", "Do you play any musical instruments? Which ones?", "What did you want to be when you grew up?", "How do you think you will know who you're going to marry?");
[Code]...
I have 2 scenes, the first scene has "mc1" and the second scene has "mc2" and a button inside it. how do i get the button in mc2 to play mc1?
View 5 RepliesI wrote this AS for my preloader which schould be able to load a movie clip after pressing a specif button in the main sceene:
[Code]....
1) The problem is that to be able to target a movieclip I will need to give it a instance name. Where can i find this function in MX ?
2) I cannot understant how I schoul put a loadBar being a small movieclip on the main timeline, I think( the same timeline the container clip is at ) or maybe not ? well I am bit confused now..
Well I have done already a sceene preloader for my site and it works perfectly and i did not experience any problems as Im having now with this new kind of preloader.
I am a high school teacher who is teaching Actionscript 3.0 for the first time. I am teaching my students how to create multiple scenes to understand actionscipt interactivity. The first scene has a button. The second scene has something happen when a key is pressed. The problem is that the second scene doesn't work. Flash doesn't even show the trace command that a key has been pressed. Keypresses work fine when done in the first scene, but when put in the second scene after a button has been pressed, it doesn't recognize the keypress event.
View 1 Replies