ActionScript 3.0 :: Put Movie Behind Existing Elements?
May 30, 2009
I am placing a movie clip in the swf by AS. In the resulting swf, It's hiding the buttons that are already on the stage. How do I get that movie clip to be behind other elements on the stage?
Here's the background and details: In Flash CS4, I have existing "Forward" and "Back" buttons on the stage, frame1 of the topmost layer Artwork, placed manually, nothing else on the stage. I made a movie clip and it exists in the library but is not on the stage, it's called up via AS, which is in frame 1, actions layer (the layer below the artwork). [code]....
View 3 Replies
Similar Posts:
Jun 3, 2011
I have an existing movie clip on the stage and i want to load a .swf into it. How?
View 9 Replies
May 19, 2009
I am updating a movie created by a previous employer. It involves screen shots and voice overs.
There is a navigation bar at the bottom with scrubber, stop, next, etc.
I named the new screen shots the same as the old ones and imported them and everything works fine. But this doesn't seem to work with the voice overs. As soon as I save over an old mp3 with the new one, the nav bar no longer works.
View 3 Replies
Aug 30, 2010
If I already have an existing movie, what is the best way to add a preloader to this movie?I have 1 frame with a few layers right now. Then, I have some movie clips on frame 1 Should I just move everything to frame 2? Does that throw anything out of sync? I am using labels in the movie clips that that I can use gotoAndPlay("label");
View 5 Replies
May 26, 2010
I'm trying to open a new window from a button in my main window and load a movie clip into it. I have not yet found a solution that works though. From the documentation I have found and tried:
Code:
loadMovie(filepath, this);
This works, but it replaces my existing one. I want a new window, so I tried to add:
Code:
this.createEmptyMovieClip("chat_mc", 999);
This loads all the components from the movie clip ontop of my existing one, it gets it half way there sort of, lol. All in all this is what I have:
Code:
on (release) {
this.createEmptyMovieClip("chat_mc", 999);
loadMovie("C:\Documents and Settings\foo\Desktop\Server.swf", chat_mc);
}
how I can get this to work? I would like two windows with two movies, the new one created on the press of a button.
View 1 Replies
Oct 18, 2010
I've got 100 instances of a particular class of MovieClip on my stage, and I'm trying to find a way to get functions that affect them all. The obvious way to do this is through their common class, but I'm having a lot of trouble finding out how to do it. Most of the tutorials I've found are about creating custom classes or creating new instances of classes. This isn't what I want to do, as I've already got all my instances on the stage already.
There are actually several things I want to use this for, but I'll just mention one for the sake of brevity.
I want to set the alpha of each MovieClip to 0 when I click on it. Here's the code I'm using for a single MovieClip at the moment:
ActionScript Code:
boxcover1.addEventListener(MouseEvent.CLICK, removecover1);
function removecover1(evt:MouseEvent):void{
boxcover1.alpha=0;
}
While this works perfectly, it means I'm going to have to repeat it 99 times, once for each MovieClip, and later on I need to do some more complicated stuff with it that 99 copies would make near-impossible to pull off. I'm hoping that by using the class ('box_cover') I'll be able to have this apply to every MovieClip on the stage.
View 4 Replies
Jan 26, 2009
I've created a fullscreen Flash .exe. I want to be able to build a button that can allow you to close the exiting movie and open a new one (kinda like Lingo's OpenMovie command). I'm sure there's an easy way to do this in AS, I just can't find it.
View 1 Replies
Sep 16, 2011
I have a PNG imported into my library and exported for use in Action script. On the stage, I have a swatchFill movie clip.Currently I have code that will transform the fill to a solid color, however I'm getting into metallic swatches and the colorTransform function will no longer work.[code]
View 10 Replies
Oct 23, 2010
it seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 Replies
Sep 2, 2009
However, I have a main movie and in there I open the multiple scenes. If I use the preloader alone with the scenes it works, but when I want to load the preloader that should open the scenes inside the main movie it doesn't do anything.
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loop);
l.contentLoaderInfo.addEventListener(Event.COMPLETE, done);
l.load(new URLRequest("magazine.swf"));
function loop(e:ProgressEvent):void{
[Code] .....
In the old situation I use a button goto frame - and on the frame there is actionscript that says:
stop();
loadMovie("magazine.swf", 'placeholder');
have changed that to
stop();
loadMovie("preloader.swf", 'placeholder');
View 5 Replies
Jan 28, 2011
I have a working script on the one hand (in a working movie) and a flash movie on the other.The script handles a form, I changed the names of elements in the target movie as appropriate.The source movie contains only one layer and one frame. The target movie contains multiple layers and plays an animation before displaying the form.How do I go about making the script work on the target movie?
Edit:I've made some progress, the textfield works, but the button produces exceptions:Cannot access a property or method of a null object reference.
The name of the button and the variable are the same.
View 1 Replies
Jan 28, 2009
I have been struggling with what I suppose is a very simple issue: I am importing content into my application via a text file, this all works fine. I have about 10 different movie clips on the parent timeline that I have hidden (dc_mc.visible = false.So what I need to do is take one of the variable names that I've got from my text file and use its value to "turn on" one of these hidden movie clips.So I'm trying stuff like:
var directory = e.target.data.directory; // Grabs the data, sets var
var raceNameButton:String = directory+"_mc"; // Set data into new var
raceNamesButton.visible = true; // display movie clip with var name
[code]........
View 1 Replies
Aug 22, 2011
I want to make a new instance of an existing symbol (movie clip or graphic) when an object hits the side of the stage. I have the code to figure out if it hit the side of the stage, i just need to know how to make a new instance and make it show up where the ball hit. I also want to be able to have multiple of these instances on screen.
View 5 Replies
Sep 13, 2010
Is it best to load the preloader from external file or place it directly into an already existing movie?
View 3 Replies
Feb 14, 2003
From one main movie, I'm calling a movie, put it into a target (everything goes fine here), then when I call the movie everithing goes fine but the elements inside the movie don't respond I'll tell you how it works. The loaded movie, has a movie clip that plays a few others clips in the main time line. When this movie get loaded into the main movie I mentioned above these few clips don't work, I see the movie getting loaded but these few clips don't work.
View 2 Replies
Jan 26, 2010
Is it generally to position elements relative to other elements or in absolute values?
View 2 Replies
Jan 14, 2009
I'm writing a FlashLite ActionScript2 piece of code. I have a series of textfields that are dynamically created and displayed on screen. I then wish to drag each of these textfields around. To achieve this I used some code from another flash site for dragging and dropping. I have two problems:
1) The txtMovies are dynamically allocated so each as a number appended to it, i.e. txtMovie0, txtMovie1 and so on. I can't figure out how to assign these in a non hardcoded fashion within a loop i.e.
object_array[0] = ("txtMovie"+i);
When I do this, it doesn't work. I think it's because it's not an object but a string. I tried using Object as a prefix to the part in brackets, tried [ ] etc... but couldn't get it to work.
2) In the function fnTxtMovieOnRelease I'd like to access the parameters (i.e. .text) of the selected text movie but, I don't know how to access it. I have no idea how to detect which of the movies are selected and thus access their individual text strings. I've tried to pass a parameter to the fnTxtMovieOnPress function but this then stops that code from working and I really don't know why.
View 3 Replies
Oct 5, 2009
I want to pass an array (which has 36 elements) as a variable from one movie to another. I tried FlashVars to no avail. Also tried ExternalInterface and again no results.
View 3 Replies
Oct 1, 2009
does anyone know how to shift all the array elements by one or more without deleting the array itself?
Something like rotating the array:
1,2,3,4,5,6,7,8,9,10
10,1,2,3,4,5,6,7,8,9
9,10,1,2,3,4,5,6,7,8
8,9,10,1,2,3,4,5,6,7
7,8,9,10,1,2,3,4,5,6
View 4 Replies
Aug 14, 2009
I have Flash 8. I created a Flash movie a number of years ago, probably in an early version of Flash. I use it on my website. I want to redesign my site and make the movie smaller from the standpoint of making the canvas/stage size smaller. I don't mean just compressing the flash movie to a smaller swf. Is there some quick way to do this without having to recreate the movie and put in smaller elements?
View 3 Replies
Jun 9, 2010
When i create a menu, the dropdowns go behind the flash element. But in some sites, like Digg, it is shown above. z-index is of no use
View 2 Replies
Feb 24, 2009
I have a custom class I am working on, one of the methods is:[code]Inside that function a dynamic TextField is created called txtLoaded, it is declared with [code]mcProg is added to the stage, I see the txtLoaded txt field drawn as well and I can trace properties of mcProg from elsewhere in the class but I cannot access mcProg.txtLoaded from anywhere else in the class.I imagine this must be a scoping issue, with txtLoaded only existing inside the createProgress method, but is there any way for me to be able to access txtLoaded from elsewhere in the class?
View 5 Replies
Jul 10, 2009
I made a .as Class where some graphical elements are spawned into the stage. However, the Flash (.fla) have some internal graphics that are supposed to be over the graphical elements spawned from the custom class.I tried to make another layer over the layer where the as3 Class is being called, but unfortunately it doesn't do anything, the graphic from the .as still appearing over the internal .fla graphics.
View 2 Replies
Jul 24, 2007
I need to change all the elements in my movie that have the color X and change their color to color Y. Is it possible to have this in AS? like, if i press one button all the elements that have the color black (graphic, text, background, etc) change their color to yellow?
View 1 Replies
Jul 22, 2010
I have been asked to loop an existing FLV file that someone else created. I do not know what version of Flash was used to create this file, however I do have an older version 7.2 Flash MX Pro. Currently the FLV starts automatically and stops and the end of the movie. The owner of the site would like the movie to start over with a continuous loop. I'm pretty much of a rookie with Flash and with HTML5 coming out soon, I don't think I'll get a chance to become a pro at this.
View 5 Replies
Aug 18, 2011
This is my first time posting and naturally Im here for a little help. A past employee took my companies Flash files for a scrolling ad. The company wants the colors changed and I will admit Im a slight newbie.
I was able to extract the SWF to a flash project folder with trillix. However I can not find this command line(see link)
[URL]
In the flash file. Now I will admit Im new to flash, but I have dug everywhere I can think of in the project folder for that command line.
As you can see from the screen shot, its in frame0 on Sprit12. Ive looked in the properties of layer 1, in the properties of sprite12, and looked in the frame. Where would this be?
View 1 Replies
Feb 11, 2010
how do i add a preloader to an already made swf?also, do i have the preloader open up in seperate html file.don't want to buy any programs to do this.i did try it by just changing the file names to preloader file name to load the swf.but it push all the content over to the right side of the screen.
View 28 Replies
Apr 7, 2010
Can I add a flash file (slideshow) to an existing flash file?
View 1 Replies
May 25, 2010
I'm trying to add a function to some existing ActionScript, but am having trouble figuring out what code to add. The image(s) already have a rollover function, but I'd like to add the option of when the button is clicked, it takes you to a new URL. Should be a simple fix, right? But I stink with ActionScript.[code]...
View 4 Replies
Jan 18, 2012
I've got a .swf file called "page01" that, at the last frame, calls another .swf called "page02". The code works fine, but since it's an addChild my page02 appears ABOVE the one already existing. I started searching for replaceChild function, but found nothing relevant...
Here's the small code :
stop();
import flash.net.URLRequest;import flash.display.Loader;import flash.events.Event;import flash.events.ProgressEvent;
[Code]....
View 7 Replies
