I'm trying to start an animated loop from one of the defined frame labels. My code on frame 1 is:
[Code]...
Unfortunately, it's not working and the animation plays through normally. At the end I have a gotoAndPlay(2); command so it doesn't reread the code again.
I want to make a button that makes you got to a random frame within a certain range (eg frame 41-50) when you press it. I have tried various codes but so far no luck. Im using AS 2
and the button is within a couple of movie clips, but you can still click it when you test
i need to know how to get a random frame on range frames
for example
on press the button go to a random frames but on range :
from (frame 10 to frame 20 only)
how to do it ? ?
I need to place an object on the stage.x randomly but not going .
The stage is 1024 pixel and the object 726. I do the following, it works ok but sometimes some part of the object goes of the stage.
menucenter=Stage.width-_root.object._width;_root.object._x=Math.floor(Math.random() * (menucenter - 0)) - 0;
so what i understand from this im learning flash from [URL] tutorials and no matter how many times i listen to each word the guy says, i dont understand this part in the vid, we are making a die to roll from 1-6 although the code below is not the finali
[Code]...
I'm trying to figure out how to generate random colors but within a particular range.In my application I have to allocate a random color to an unknown number of movieclips.I can do this ok but sometimes I'm wind up with a very ugly combination of colors like bright yellow and purple for examples.How can I generate random colors within a particular "range" I guess is the word for it?
ActionScript Code:
for (var h:int=0; h<noOfUniqueClips; h++)
{
[code]........
I have a single line for my XML gallery,that I'm have a few troubles with.I want to tell the gallery that after it has loaded all the thumbnails; to perform a function on the the 5th thumbnail up to the 40th.gal["thumb"+(5+random(40))].gotoAndStop(2);So far, I've just managed to tell it to randomly select any thumbnails from 5 to 40. I need EVERY thumbnail from 5 to 40.
View 2 RepliesHow to get say from 1 to 10, three randomly chosen numbers but simultaneously exclude the possibility of a repeated return (ie two 2s or three 6s)?
View 8 Repliesim sure its an easy one:
var tstArray:Array = new Array(1,2,3);
for (var a:uint=0; a<tstArray.length; a++)
{
var x:Number = Math.floor((Math.random()*tstArray[a]));
[Code]...
What's a simple way to generate random numbers with a range?
View 2 Replies[code], but I need to eliminate a 0 outcome from that formula. Is there a way to make sure I never get '0' as the result or should I do this another way?My goal is to multiply a Number with +/- 1, but it needs to be random of which one i multiply with.
View 9 Replieshow do you specify the range of numbers in in math.random()?
View 9 RepliesI'm trying to come up with a function that can give me an array of unique random numbers based on a range. If they don't fit within that range then it keeps check until it return the correct array of numbers.
Unfortunately I just keep getting an constant loop that crashes flash.
ActionScript Code:
var positions:Array = [];
function uniqueRandomNumber(max:Number, min:Number, len:int, range:int = 100):void
{
[Code].....
uniqueRandomNumber( 200, 0, 6, 40 );
I want to make sure that all numbers are 40 apart from each other
How would one produce a random number, ranged from say, -100 to 100?
View 3 RepliesIm trying to create a list random numbers from 1-30 but only 10 will appear. but i also need to make sure that the list of random numbers will not have duplicates (eg 1,1,20,14,3,28,4,1,18,21). I had the thought of using an array to store the list of numbers but im stuck with how to properly use an if..then to check if the same number has already appeared.
_scriptRookie
Code:
function randRange(min:Number, max:Number):Number {
var randomNum:Number = Math.floor(Math.random()*(max-min+1))+min;
return randomNum;
[Code].....
I am trying to exclude dark(er) colors, not sure this is the right way, but its the best with my level of knowledge
Code:
var color:uint = (Math.floor(Math.random() * 0xFFFFFF));
function randomColor(color:uint):uint {
[code].....
I want to animate an image inside a movieclip with frame label animate1, animate2, animate3 and animate4.I did manage to generate random numbers but my concern is that I want my animation will not animate same image twice, below is my code.
[Code]...
Create a 12x9 grid;Populate the cells with random numbers ranging from 1-9;Assign a symbol (custom graphic) to each cell depending upon which random number is generated in it;Limit the amount of times each number in the random range is used to 12.My question is simply this: how do I, using AS3, create a random number function that will only use each number in its range a maximum of 12 times (it is important to note that my grid consists of 108 cells using the numbers 1-9 exactly 12 times each)? So for example, if the random number function populates 12 cells with the number "4," it will then exclude that number from its remaining iterations.I am adhering to OOP standards so including script in actual timeline frames is not desirable.
View 5 Repliesreally great job done in the forum This is my first thread here, and i would like to ask how can someone produce a random number within a complex range.In my case i want to produce a random number in the range [0,90]OR[270,359] and i can't find the way to do this using Math.random . I looked on the internet but in most cases a simple range is used like (2,40) or [4,50] etc.
View 14 RepliesI have an object which I want to rotate between -45 and 45 degrees, but I want that to be based on the mouse position. If the mouse position is at zero, I want the object to be at -45 degrees. If the mouse position is at the stageWidth, I want the object to be at 45 degrees. How would I accomplish this?
View 1 RepliesI have a keylistener that makes my player object gotoAndPlay(10) and I want it to play frame 10-28 then repeat until it's told to go elsewhere. I tried putting gotoAndPlay(10) on frame 28, but it never actually reaches the code. I tried putting a trace statement there. While the animation reaches frame 28, the actionscript is never run. Yet, if I move the code anywhere between 10 and 22 it does run. But 23 to 28 it does not. There are no keyframe structures that exist between 10 and 22 that don't between 23 and 28. Also, the gotoAndPlay() code only plays one frame of where I tell it to go then resumes the rest of what it was playing.Basically, I need to gotoAndLoop(10, 28) ... which I will write after I figure out how to make it work.
View 6 RepliesI'm trying to get a random date in a date range and this is what i have so far but it doesnt seem to be working ? Where I'm I Going wrong ?Gets the date difference
private function differenceBetweenDates(date1:Date, date2:Date):Number{
var MS_PER_DAY:uint = 1000 * 60 * 60 * 24;[code]..........
This is something I used to know how to do in the first versions of actionscript, but I've been away from flash for a few years and am utterly lost. What I want to do is to get the movie to display random images (from a selection) for random amounts of time (subject to minimum and maximum times).
View 2 RepliesI have a tic-tac-toe game. Where the user would which spot they would want to put their X or O in and then they would go to a random question. That's where my problem starts. How do I get it to go to a random question?[code]This is what I tried using. It works, but it only goes to QuestionOne. I tried putting a comma to seperate the labels, but that just makes it play the whole movie.
View 2 Repliesi have 5 different movieclips in flash library (mc1 / mc2 / mc3 / mc4 / mc5).And i have a master movieclip (master).How to make randomly load one of movieclips onto master movie clip?
View 2 RepliesI'm making a slideshow that plays the different slides at random. I have a movieclip named products that will have a different image on each of the 19 frames, and a code on the main timeline that changes the frames of the movie clip. I'm having a little issue with this code. At first I used:
[Code]....
i'm just trying to do something really basic and I'm stumped.all i want to do is create a radom number onEnterFrameits to go at the end of a game i've made and the score will be radom at the end screenso far I have this below but it will not stop it just keeps going and going i've put stop(); in but that does not seem to work. I know its simple but I just can't see it.
this.onEnterFrame = function() {
display = Math.round (Math.random (10)*9)+1;
}
After clicking this button i go to a random frame from frame 1-5 .. something like that.If i ever click this button this goes me to a frame ranging from frame 1 up to frame 5LOl does this make sense.. .XD just answer me i'm going nuts lewl )How do i make a numerical stepper like thisSTR : 1/10AGI : 1/10LUK : 1/10 STATS AVAILABLE : 20I made the limit for each stats but it stills doesn't reduce the stats nor go to the limit of 20 instead they go like thisSTR : 10/10AGI : 10/10LUK : 10/10 STATS AVAILABLE : 20
View 2 RepliesHow do i make a button that goes to a random frame but only with the range of
20-50 frames
EDIT:so the 1-19 frames doesn't include in the randomness XD
I have a simple Flash movie with a series of still pics fading from one to the next.I want to use it in a web page masthead and I would like the movie to start on a random frame.Is there some simple AS3 code I could use in the first frame that directs the movie to immediately jump to a random starting point within the 220 frames contained in the movie?
View 6 Replies
