what I want the swf to do is upon roll over of the banner ad, I want a a h.264 video to load to the right of it (I have an alpha button over the entire stage). I've got the rollover to play the video, the only problem is when I roll out, the video continues to play if I roll back over, the same video plays on top of that, again and again and again every time I roll over.
[Code]...
How would i make a web banner that maybe could expand to a bigger size when i roll over it?
i see people doing these over the internet but do not know how.sometimes the web page changes to accommodate for the bigger web banner once the user rolls over with their mouse.
I've done a lot of searches but still cannot how to make the video control bar in a move appear and disappear when moused over or rolled over.
View 4 RepliesDoes anyone know of a decent tutorial showing this? I'd like to have the user roll over a button, then start some streaming video. Either they roll over the actual video, or just an invisible button that's placed over the video. Either way.Every time I try to search for this I keep getting "videos about how to create roll over buttons." Not the same, and driving me nutz
View 1 RepliesI've been constructing a flash video player from scratch using tutorials online, and I cannot figure out how to add a timecode (elapsed time/total time) or a way to have a pre-roll video. I'm using flash cs4 and AS3.
View 1 RepliesIm trying to get a movieClip to change its tint on roll over and back to normal on roll out. But this has to happen gradually like a tween. Im trying to use the code for alpha tween but its not exectly i also tried the tweenlite but im to confused :S here is my code:
[Code]...
I want to create a button that toggles but has a roll over, roll out and click animation. Anyone willing to point me in the direction I need to be so that I can achieve this. I can create the roll over and roll out animation for the buttons but then how could I toggle between the two buttons. Ultimately this is for a start and stop situation. I want when I roll over the button for it to have a transition then click and it toggles to the alternate button with animation. I have been tackling this now for a week and with no success. So far I have found ways to toggle but loose the animation or vice verse.
View 4 Repliesi've been trying to code a small variation into the normal roll over roll out animations... i want the animation to stay on the last frame once i click the button. but when i put the code in it dosent even bother playing the rollover/out animations it just goes to the end frame...
Code:
stop();
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
[code]....
So I have a menu that fades in on a movie clip rollover. It fades out when the mouse rolls out over a 'hit area' mc. All is working fine except when you move fast off the hit area. Sometimes the fade in menu remains up when the mouse should have traveled over the hit area and told it to fade out... any reccomendations to remedy this?
View 3 RepliesButton class:
[Code]...
The Roll Over and Roll Out State isn't working.
make a roll over and roll out? with roll out appear image and with roll over disable
[Code]...
I have MovieClip A on stage, that when the user rolls over it another MovieClip (B) is added above it to the stage (it's not added as a child of Movieclip A). Now, when the user rolls over this newly added clip, it triggers the roll out event of the clip 'below' it. So, how can I prevent this from happening ?Basically, it's a movieclip that displays a button when rolled over and hides it when rolled out. I need the roll out NOT to be triggered when the user rolls over movieclip B.
View 6 RepliesI just want to design a button when the mouse roll over the button will gradually become larger (to a fixed size) and gradually comes to the originally size when roll out. I try to use "Adding Buttons to Movie Clips" method, ie, one MC with two layers, an amimation MC (tween from small to big and then big to small) and a button. Add script as follows:
on the first frame:
if (Playing eq "True") {
play ();
} else {[code]....
When I roll over the MC tween small to big and big to small and when roll out the MC gradually small. What I want is when I roll over the MC tween small to big and keep it is except when I roll out.
I have seen more and more Flash banners includes real video footage. How do I go about including video in banners and still keep the filesize low?
View 1 Repliesi'm making a banner, which needs to be under 25ki'd like to use a video. tell me the best way to call a .flv into my .swf?
View 1 RepliesI'm quite new to flash but have experience in other adobe programs, I'm trying to create banner with imbedded short video no more than 5-6 sec.I was desperately trying to find some tutorials or any help on this subject without success.
View 2 RepliesI have a graphic that when rolled over it starts a movie clip, when rolled out or off I would like the clip to instead of stop actually roll the movie back whether the clip is at the end or not. Like an animated button I would guess.
View 1 Replieson (rollOver) { gotoAndPlay(2);}on (releaseOutside, rollOut) { gotoAndPlay(11);}
i am using this this scrip in flash 8 scrip 2
and i want to use in flashcs5 script3
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 RepliesNew to flash and building banner ads.My problem is that I have made a banner ad that works when I preview it but when I try sending it to someone else via email all that shows up are 5 white circles in the middle that rotate flashing.I thought it might have been something with the video so I tried sending the ad without the video and it still did the same thing.
View 8 RepliesI'm trying create an expandable banner that when expands plays a video that has play, pause, mute buttons and a seek bar.
I've successfully created the video player and converted it to a symbol and it works when I copy it into other flash files so I know it's the banner that troublesome.
The problem is when I use it in the expanded part of the expandable banner I can't click on any of the buttons. I can see it's working as the video is playing and the seeker bar is moving. It's almost as if there's an invisible button over the top (the hand icon is visible) stopping me from hitting the buttons of the player.
The code for the expanding banner is very simple (see below)
on (rollOver) {
gotoAndStop(2);
}
on (rollOut) {
gotoAndStop(1);
}
I'm having a rich media banner to deliver.. soon. I've imported it and set it to loop with autorewind parameters.
Now: How can i make it to loop 2 times and stop at the last frame ( seconds 00:12 / frame 370) - where it shows a still shot of the product - ?
I have two buttons in my flex app next to each other, ButtonA and ButtonB. When the user does a mouse roll-over on any of the two buttons, I want the roll-over skin (overSkin) to show on both buttons, i.e. Button A and Button B. I tried to do it using this when user rolled over Button B:
ButtonA.dispatchEvent(new MouseEvent(MouseEvent.ROLL_OVER));
and then when the user rolled out of Button B I do:
ButtonA.dispatchEvent(new MouseEvent(MouseEvent.ROLL_OUT));
Button I cannot do the same on Button A when the user rolls in/out. It causes an infinite loop resulting in stack overflow.
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 RepliesI am building a banner ad and I am using Flash CS4. I need it so when someone clicks the banner it takes them to the page in a new window. Its just a a simple URL and I keep getting syntax errors now and I dont know how to do this properly. I have tried these methods.
[Code]...
I have basic movie clips, On roll over, show arrows [NEXT, PREVIOUS] on movie clip [they then show other images inside movie clips]I can show arrows on roll over.But when i roll over the arrows the main ROLLOUT function gets called, the arrows hide. I've tried several flagging methods and have resulted in using a larger invisible border around the clip, rolling over that hides them.
View 1 RepliesIm struggling to get anywhere with this which i assume is simple :swhen i enter a page it rolls in with a animation, and when i press any other main nav button it rolls out (reversed animation) of current page and then plays (rolls in) with the new page.Ive got all my buttons going to relevant pages but not sure about the reverse animation bit ?
View 1 RepliesI have 3 buttons going around in a circle, in the middle of this circle I want a specific image to fade in for each button when you roll across it then fade out when you move off the button. I also want the button itself to change colour slightly when you roll across it. I've not had much look so far without the use of actionscript, but even with using it I'm not getting very far, I also seem to have a problem where once I have an image appear on the rollover of abutton that the image becomes part of the button, ie instead of the image just appearin when you roll over the button it appears when you roll over where the image should be appearing.
View 1 RepliesI am trying to use a rollover or a click effect on a button placed in a time line. The button is in a different layer to the running time line. When I go in to up, over down, hit and insert a new frame there when the movie runs the button just flicks back and forwards continually.
How can I get the button to switch over only when I roll over or click it?
I have 10 square color movieclips and I want whe rollover on one another 3 kinda rollover too and do this for all the movies clips. When rollover on b1 i want the b2 b3 and b4 to appear darker too. When roll over on b2 I want the b1 b3 and b4 roll over darker too.
View 2 Replies
