How come the following AS3 works fine when placed in Scene 1, but throws multiple "1120 Access of undefined property" errors when the code is placed inside a movie clip? Somehow none of the variables in the code are recognized in the later case.
[Code].....
I have a slideshow with 3 sections. The slideshow loops automatically as well as when being prompted by a button to go to a particular section. I also added a play/pause button which works initially, however, when clicked on one of the buttons to go to another section, the slideshow resumes looping..I"m assuming I need to check weather the pause button has been clicked to resume/or not resume the slideshow... but I'm unable to figure out how to do that.head of time! Here's the code:
import fl.transitions.Tween;import fl.transitions.TweenEvent;import fl.transitions.easing.*;
//Timervar tl:MovieClip = this;var slideDuration:uint = 12000;// or use whatevervar slideTimer:Timer=new
[code]........
I'm working on a slideshow using a class that I wrote that builds the slideshow and an XML file that points to the images. I plan on improving it later but for now I just want it to cycle through a set of images, resize them if they're too big or small, and show a loading bar while the image is loading. It works fine if I test it in the Flash IDE or standalone Flash Player, but if I drag the SWF into Firefox or Safari, the loading bar refuses to show up. I also tried publishing to an HTML file and that didn't work either. I figured there could only be two different reasons why it wasn't showing up - either it wasn't being added to the stage, it wasn't being made visible after it's initially set to invisible. I decided to comment out the part of the code that make it invisible to begin with the loading bar showed up, but it wasn't showing how much of the image had been loaded when it changed to a new picture. Here's my code:
[Code]...
For some reason the pictureLoading function isn't being called when I test it in any browser. I've seen the loading bar randomly pop up a few in times in Safari 4 but then I try closing the window and testing it again and I get nothing. Can anyone help me figure this out? About:plugins in Firefox says I have Flash Player 10.0.22 installed, and I'm using Flash CS3 in OS X.
I have a flash code where i am loading an AS 2 SWF inside AS 3. The thing is if i put the AS 2 SWF on same domain its working fine but if i put AS 2 SWF on different domain it loads the SWF properly but the "stop()" written inside the AS 2 frame doesnt work... and it keeps on playing all the frames continuously...
Here is the loading code..
var context:LoaderContext = new LoaderContext();
if(Security.sandboxType == Security.REMOTE){ context.securityDomain = SecurityDomain.currentDomain };
var objLoader:Loader = new Loader();var mRequest:URLRequest = new URLRequest("SomeURL.swf");objLoader.contentLoaderInfo.addEventListener(Event .COMPLETE, onSWFLoadComplete);objLoader.load(mRequest, context);
[Code]...
Check my little piece of code. Everything's going well, until the onEnterFrame. My MC instances aren't doin' anything!
Code:
colors = [0x66FF00, 0x20DFD0, 0xEE1164, 0xDAE31C];
MovieClip.prototype.drawCube = function(_moveY, _amount) {
for (i=0; i<_amount; i++) {
[Code]...
In the first frame of the main time line i have 7 movieclips which are buttons. Within these movieclips there are additional buttons with a simple rollover function to change the background colour.
The problem I'm having is that the action on the buttons doesn't work. I'm guessing this is something to do with the AS i have within the mc.
Still creating the menu I ran into this problem with getURL. I've tried a lot of things, but it still won't go to the URL. Here's my AS code. I marked out where the getURL is.
[AS]
// Create xml-object
menuXml = new XML();
// Ignore tabs, spaces etc.
[Code].....
I have created a swf (exporting) that have action script that adds childs to the stage. When i export the file and see the result it is all ok. But when i use de same file inside a uiloader the action script seems not to work because de childs doenst apeear in the stage.
View 23 RepliesIn fact, when i publish my FLA with player 9, there is no prob. When i publish with selecting player 10, there is this problem.
I paste my code :
var leng:int = MovieClip(root).program.websiteXML.pages.titlePage.length();
trace ("leng"+leng);
setInterval(function () : void {
[Code]....
Still creating the menu I ran into this problem with getURL.I've tried a lot of things, but it still won't go to the URL.Here's my AS code.I marked out where the getURL is.
[AS]
// Create xml-object
menuXml = new XML();
[code]......
I made a motion tween that works great on it's own, but won't tween at all inside of a frame. Why not?Here is the code as a function. What's up?:
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
fadeIn(myMC);
fadeIn = function(mc) {
var myHoriTween:Tween = new Tween (mc,"_x",Back.easeOut,900,0,1.1,true);
}
I still can't figure the way to make my buttons work
[URL]
here is my fla file... Basically I have a rollover buttons inside a movieclip and my action script in the first frame of the scene is the following
_root.designer_mc.b1_01.onPress=function(){
goto("designer01");
}
b1_01 is the instance of the button inside designer_mc movieclip~ however I ealized that buttons won't work in movieclip and i just don't know what's other solution
how to get this fixed~ i m so stuck and I have wasted my past 2 days trying to figure this out and still no result...
Maybe it is a silly question but I have problems when I put a button inside a movie in Flash 5. It doesn't work and I don't know why...
View 3 RepliesOne of the the most annoying errors to get is the "duplicate function definition" error! Flash doesn't want to see the same function twice... But what about the same function used in two different sections (labels) of one site? I've got two different slideshows in two different sections of my site, and I need the same function called out for each. The function is function nextImage():void If I remove it one, that slideshow doesn't work (remains fixed on image 1 of the slideshow).. if I keep it in, nothing works! I had wanted to use the same script for both slideshows, but forget that! So, I found another script for a different type of slideshow.
View 4 RepliesI have a button instanced "howto_weblink_btn" which is located inside a MC instanced "HowTo_maininfo_mc". I would like to write a code allowing me to access this button from the main navigation menu. Here is what I come up with:
HowTo_maininfo_mc.howto_weblink_btn.addEventListener(MouseEvent.CLICK, onClick_openJTV);
function onClick_openJTV(event:MouseEvent) :void {
HowTo_maininfo_mc.navigateToURL(new URLRequest("http://www.ubloom.com/index.php?
[code]......
Atm im putting a a game i build into my main flash app.Everything works fine except the keyboard listener.unny.AFTER a mouse click on the 'loaded' swf the keys 'arrow UP' + 'arrow DOWN' start working.I created already a script that loads the listeners IF they are not loaded yet, but i think thats not the problem. Same situation.After clicking on the movie it starts to work, but apparently the listeners are already applied. All other listeners work besides the keyboard listeners.Stand alone(the game swf running by its own) the game works perfectly!btw the game is importing a main document class.
Code:
this.addEventListener(KeyboardEvent.KEY_DOWN
var keybListenerLoadedUp:Boolean = false;
[code].....
i'm loading an external swf files in one but the buttons inside the external files wich controls its timeline doesn't work, i'm using AS3 but why it doesn't work.The external file just has some simple actions to move between keyframes in the timeline with buttons goto and some other similar actions
View 4 RepliesI was wondering why my current code for calling a setInterval on a function doesn't work inside my class.I have this code inside one function, calling a second function.
intID = setInterval(selfReferential, dupe, 30, 0x000000);
The selfReferential keyword refers to the current class,but was defined previously (selfReferential = this; ).I get no errors, but the dupe() function is never called.and I had the selfReferential variable replaced with the this keyword at one point as well.
I have a character, every body part is a movieclip. Now I wanted to put a movieclip for the eyes inside of the headmovieclip so that I can change them independently from the mouth. So in the eye-movieclip that is inside of the head-movieclip I put two keyframes, one for opened eyes and one for closed eyes. I put it to "Single frame" in properties. Now, whenever I make a pose and I change the frame number under properties so that it displays the closed eyes, it does that for the whole movie, not only on the frames that I changed it.
I wanted to use that to control things like eyes, ears and the mouth individually but like this it won't work, it changes it for the whole animation.
I decided to try to use setInterval for myanimation, which is just a mouse trail.However, I'm trying to get teh mouse trail to be a dynamic mask.In my previous swf this was achieved by using a holder mc with the animation inside and then using this as the mask. But this time I just canpt seem to hit on the right way to get it to work. The code I am using for the mouse trail is:
Code:
var i:Number = 0;
var myInt:Number;
var t:MovieClip;[code].....
in the function, but now the trail doesn't resize and the mask still doesn't work.
I have a button object that I need to scale to align with the variable width of an array of images.However, when I set the width in code, the button does not actually become that width. Tracing out the width gives me the correct value, but on screen.. it's off.
I've proved it to myself by scaling the same button object manually in the properties pane and visually comparing. Both of the buttons below have a width of 410.
Code:
navigatorDown_btn.width = 410;
navigatorDown_btn.x = (stage.stageWidth/2)-(navigatorDown_btn.width/2);
trace(navigatorDown_btn.width); // output: 410
I have a Flash slideshow presentation that I created for my company's website, which can be seen on our frontpage.The slideshow has NEXT and PREVIOUS buttons, as well as other buttons that are used to link to other parts of our online store. The problem that I am running into is that after the first cycle, the slideshow doesn't cycle through every slide anymore! And then eventually, after about 5 minutes, the flash plugins completely crash and my browser locks up. I think I found out that it has to do with the intervals that I put in the Actionscript 2.0 coding. I didn't put any "clear intervals" into it and that's why it's screwing up, but every tutorial that I used to integrate the clearInterval function didn't work.
stop();
timeInterval = setInterval(nextphoto, 7000);
function nextphoto(){[code].....
I have a simple slide show that just used timeline tweening(no actionscript) named slideShow.swf.I have another swf named loadSS.swf that I load slideShow.swf into this file has a preloader in it.I have a 3'rd swf named loadLoadSS.swf that simply loads loadSS.swf.The preloader in loadSS.swf works fine when I run it standalone.When I run loadLoadSS.swf the slideshow runs but the preloader doesn't.I don't want the preloader to run on the final destination because it's a website with a long timeline and many levels and the slideshow will be shown in many places and it just gets complicated. If the slideshow can just provide it's own preloader life will be much simpler.[code]
View 10 RepliesI have a slide show that displays 6 images and is suppose to do a fade in / fade out (not an overlap fade) between each image. The peculiar behavior is that when the movie is testedlocally by using "Test Movie", the fades occur properly. However when the swf is viewed from the website, during the first cycle of the slideshow, the next image does NOT fade in. After the first cycle, the fade in occurs properly.
Code:
import mx.transitions.Tween;
var nInterval:Number;
[code].....
I have a simple slide show that just uses timeline tweening(no actionscript) named slideShow.swf I have another swf named loadSS.swf that I load slideShow.swf into, this file has a preloader in it. I have a 3'rd swf named loadLoadSS.swf that simply loads loadSS.swf. The preloader in loadSS.swf works fine when I run it standalone. When I run loadLoadSS.swf the slideshow runs but the preloader doesn't.
I don't want the preloader to run on the final destination because it's a website with a long timeline and many levels and the slideshow will be shown in many places and it just gets complicated. If the slideshow can just provide it's own preloader life will be much simpler. slideShow.swf has no AS loadSS.swf has this AS:
[Code]...
I am trying to make a image slideshow for my companies new website. I used the Flash Image Viewer plugin from Dreamweaver, but it doesn't contain the transitional effect desired.
Every tutorial I find talks about advancing the images through an interactive control, I just want the images to change by themselves and do a fade transitional effect between images. Can anyone please point me to a tutorial that has this w/o the intractive buttons? I have been looking on the internet for hours and can only find tutorials / example w/ the intractve controls.
I have this little slideshow, it is for practise for my students. It always worked well in as 2.0, 5 slides, and two buttons: back and next.The script in2.0 has: prevFrame and nextFrame in the code and for the exceptions in frame 1, and frame 5 we made a new frame 1 in the actions layer, and coded the back button, gotoAndStop(5); and a new frame 5, and coded the next button: gotoAndStop(1); Works.
Now I put the thing over tot as 3.0: And I can not get it to work properly....the buttons work, but when I am on frame 5, and go back to 4, it will go no further than 4, evenso when I go back to frame 1 from 5, I can not go further up than frame 1.
import flash.events.MouseEvent;
stop();
next_btn.addEventListener(MouseEvent.CLICK, volgendFrame);//next_btn.addEventListener(MouseEvent.CLICK,[code].....
I have a Button that is inside MovieClip1 which is inside MovieClip2; yet when i click the Button it doesn't dispatch Event.
View 5 RepliesI create a web template in Dreamweaver 8; in this template I added a slide show (Image Viewer). This template is working fine in browsers and slide show also playing, but when I create the new web page from this template, and then the slide show not playing, there is an error message display.
"A script in this movie is causing Adobe Flash Player 10 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script? Yes or No"
I keep getting this message again and again. When I say no, it asks me again and again, when I say yes then I can't see whats playing. I also Restart the computer, but don't work.
How can I make my gallery work? Initially I have a menu (scroller-voetsjoeba) in where I say
for(var i=0;i<_global.gallery_xml.firstChild.childNodes.le ngth;i++){
menumc=menucontainer.attachMovie("menuButton","but ton_mc"+i,i);
menumc.id = i;[code]....
and so far it works fine - I get my firstImage.....I can also get the slideshow to work but not as intended, only in the first category "life", and that's really my problem......How can I make the slideshow work accordingly to my xml file, so that if I click a menubutton in the scroller it correspondes with the correct id and so on?
<?xml version="1.0" encoding="UTF-8"?>
<menu>
<gallery name="life">[code]...