ActionScript 3.0 :: Turn Movie Clips On / Off With It?
Mar 20, 2012
I am working on an interactive map that allows the user to click on different categories and see them highlighted on the map. (For example - if you click 'retail' all the retail locations on the map will be highlighted.) I have several different categories - 6 to be exact - and I would like the user to be able to click on multiple categories at once, so they can see where residential areas are in relation to offices, for example.
What I've done is create what looks like a 'toolbar' to one side with buttons for each category. (initially I was using actual flash buttons which redirected to a later frame showing only the highlighted buildings, and then the user could click a 'back' button to get back to the toolbar.) I have now made each of these text objects into movie clips, and when I double click on the movie clip I have 10 frames. One is actions, obviously, one is the text itself (currently using TLF text) and the third is a .png file, which I've set up as a movie clip and tweened so that it goes from 0% alpha to 100% alpha within the 10 frames.
In order to get the SWF to function where I'd be able to click on/off one of the categories more than once, I had to set the initial TLF text as 'read only' (when clicked this goes to frame 10 and stops, leaving the buildings highlighted). and the final TLF text as 'selectable' (when clicked, this one goes back to frame 1, where the buildings are not highlighted).
Unfortunately, when I have all 6 of these movie clips in the SWF, if I click on more than one at a time, I must click them 'off' in the reverse order. Otherwise they will not turn off. EX - if I turn on 'restaurants, hotels, residential' in that order, I have to turn them off in the order of 'residential, hotels, restaurants'
View 1 Replies
Similar Posts:
Sep 13, 2009
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
View 1 Replies
Jun 5, 2011
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
View 2 Replies
Jul 15, 2009
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 Replies
Jan 4, 2009
I'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 Replies
Jul 14, 2003
How would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
View 7 Replies
Sep 17, 2004
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
View 3 Replies
Jan 5, 2009
Does anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 Replies
Aug 18, 2005
Here's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
View 2 Replies
May 8, 2003
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
View 2 Replies
Jun 22, 2010
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
View 5 Replies
Jun 1, 2009
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
View 5 Replies
Jul 19, 2006
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 Replies
Oct 7, 2011
I'll start off by saying I'm a newbie, just putting that out there. How do you make a turn by turn multiplayer flash game? I don't know if an engine is made in AS3, PHP, Javascript, or whatever,I made my game already, it's just that it isn'tmultiplayer yet. Basically, there are lines, and each player crosses out a number of lines, and the last player to cross out a line is the loser. I want it where one user crosses out some lines, then presses End Turn, then the other does their turn and then presses End Turn to allow the other player to move his cursor. But how can I get both players to see the same frame and only have one player have the ability to move the cursor during a turn? Is there some easily adaptable multiplayer engine for flash for newbies out there
View 2 Replies
Mar 27, 2005
okay, i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect... my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
View 5 Replies
Mar 27, 2005
i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect...
my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
also if you want to see what the problem is, here's the website in it's infancy (700k)
View 5 Replies
Feb 10, 2010
I need code that
1. Turn ALL sounds in the movie off
2. Turn ALL sounds in the movie back on
all with out the user having the press a button. Something like an "onLoad" in javascript so it's automatic.[code]need code to turn it back on when the user hits the next embedded flash movie on the next scene.
View 1 Replies
May 26, 2010
I can download video from youtube as FLV.Want to play back in my Flash swf file without sound.How do I mute the sound during user playback?
View 1 Replies
Feb 12, 2009
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 Replies
Feb 21, 2012
I want to create a button to turn on and off a movie clip, did any one know how to do it!
View 6 Replies
Jul 6, 2003
okay here's my code
Code:
onClipEvent (enterFrame) {
for (z; z<4; z++) {[code]....
how do you turn the s[z] into something like s1 - s2 or s3 ? i just want different movie clip names for each loop..
View 2 Replies
May 17, 2009
I made this Code to scale the movie when mouse is over and turn it to the normal size when mouse out, I got this error and i don't understand it (TypeError: Error #1034: Type Coercion failed: cannot convert "mc1" to flash.display.MovieClip. at Scaling_fla::MainTimeline/DoMe()TypeError: Error #1034: Type Coercion failed: cannot convert "mc1" to flash.display.MovieClip. at Scaling_fla::MainTimeline/reDoMe()
[Code]...
View 7 Replies
Aug 26, 2010
I've come a long way with this sliding menu("Sliding menu.zip"). There's only one more thing that needs to be fixed. Can anyone tell me how to get the first movie clip button ("1") to be red when it arrives? When the user clicks on another button I want the red number one to turn black. It's sounds so simple but my mind is blank.
View 2 Replies
Dec 17, 2010
I have continually run into this so i guess i just don't understand some foundation to how AS3 works.
So, I have a movie clip in the library (ClipA) - it is linked to a class.
Inside Clip A there are 3 other Movie Clips (SubClip1, SubClip2, SubClip3).
When I place ClipA on the stage i want to adjust the frame that each of the SubClips are on.
BUT, when I try to set them to a frame in ClipA's class file i get an error like this:1061: Call to a possibly undefined method gotoAndStop through a reference with static type flash.display:DisplayObject.
[Code]...
View 3 Replies
Jul 30, 2009
i got 3 movie clips on my logo and im using scale up and scale down for each other on Mouse_OVER and Mouse_OUT.i would like to make scaled up logo to be on absolute top.[code]
View 6 Replies
Feb 13, 2010
We have a movieclip mc1 with another movieclip mc2 inside of it. We are creating an instance of mc1 on the stage through actionscript and need to be able to reference mc2. We have tried various methods to do this but had no success.
View 3 Replies
Oct 19, 2010
I'm getting no errors on this, Go (comeback) is my movie clip which should turn up when the mouse leaves the stage area and leave when the mouse enters the stage. I know it's probably my removeChild command but I don't know how to fix it.
[Code]...
View 4 Replies
Dec 23, 2009
I need to make the cursor turn into to a hand when the user is with the mouse over the movie clip. when I use the following code the entire movie turns into to a hand but I just want it on my movie clip.
[Code]...
View 1 Replies
Jul 6, 2009
I'm trying to use the scroll pane component for the first time, and I've spent most of the day getting nowhere. Based on my experience with other components and with loading content into movie clips, I expected that I would point my scroll pane to its content and be off and running, but that hasn't happened.
[Code]...
View 4 Replies
Oct 23, 2009
I have a label I am referencing form a movie clip inside the movie clip which contains the "label_2." Here is the code I used: MovieClip(parent.parent).gotoAndPlay("return_2"); Now I need to reference a instance name of a movie clip in side the same scene.
View 10 Replies
