I have a problem with connecting as3 with php. I get the data return from php is wrong.
This is my code
AS3:
var file:String="test.php";
// Define global variable
function GetXMLfile(){
var loaderphp:URLLoader=new URLLoader();
var urlRequest1:URLRequest = new URLRequest(file);
loaderphp.addEventListener(Event.COMPLETE, GetCharInfo);
[Code] .....
I have a function that's called when a file download has reported progress:
private function progressHandler(event:ProgressEvent):void
{
var percent:Number = Math.round((event.bytesLoaded / event.bytesTotal) * 100.0);
Alert.show(event.bytesLoaded.toString());
//pb.setProgress(percent, 100);
}
Now, this should work fine but unfortunately, event.bytesLoaded is returning much larger values than it should. For a test file (8555 bytes), bytesLoaded goes all the way up to 8973384.
I have an AS2 document that's 590x300. When I do a trace on Stage.height it returns 200. I changed the document to 590x301 and the trance returns 201.
View 3 RepliesThis is a bit of an odd-ball problem. I've created a website 524 frames long, but am creating the pre-load bar *after* the website is done. I could move all the frames a few over, but this would require remapping all my many, many buttons. What I've done then, is told Frame 1 to go to Frame 525, and put the preloader there. I should note the site works perfectly without the pre-loader, I just want it to be smooth once it makes it online.The following code is being used for the first frame (frame 525) of the pre-loader:
bytes_loaded = Math.round(this.getBytesLoaded());bytes_total = Math.round(this.getBytesTotal());getPercent = bytes_loaded/bytes_total;this.loadBar._width = getPercent*100;this.loadText = Math.round(getPercent*100)+"%";if (bytes_loaded ==
[code].....
I am using a content loader through AS3 to load some images and then later pushed into an array. I have pushed my image file paths in to an array (arrayImages). But when the loader loads the images it doesn't load the images based on the order they are listed in the arrayImages, instead they were loaded based on their file sizes. Is there anyway that these can be loaded in the order they were pushed to the array? Below is the code that i use to load the images.
function funcLoadImages() {
for (var i:uint=0; i<arrayImages.length; i++) {
var ldrImageLoader:Loader=new Loader();
ldrImageLoader.load(new URLRequest(arrayImages[i]));ldrImageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE,pushLoadedImagetoAnotherArray);
}
}
why rapid clicking (moving to another part of the gallery) makes the loader loads the wrong picture?
Here is a simple example:
Code:
var req:URLRequest=new URLRequest("gallery.xml");
var xmlLoader:URLLoader=new URLLoader(req);
xmlLoader.addEventListener(Event.COMPLETE, xmlComplete);
[Code].....
I'm creating a custom class to retrieve some data using URLoader.My code is below, doing this from memory, plz ignore any minor typos.The challenge I'm encountering: when my custom class calls the loader, the event handler takes over. At which point the context of my code leaves the function and it's not clear to me how I then return the data retrieved by the loader. I sense that I'm breaking the rules of how ActionScript really runs by putting a loader in a separate class; at least, that's my primitive understanding based upon the reading I've done on this.So can I do this? I am trying to create a clean separation of concerns in my program so that my main program doesn't get clogged up with code concerned with retrieving remote data.
[Code]...
in AS3 I'm trying to load a URL (a Yahoo address) into the application so I can process the source code and pull things out of it.However, when I load it, or any other page, I get 0 bytes back.Here's my current code.
private function doSearch():void {
var req:URLRequest = new URLRequest("http://yahoo.com");
var loader:URLLoader = new URLLoader();
[code].....
I've been trying to figure out what I'm doing wrong here. I the below code works, but I want another function to be able to use the data stored in the 'sectionPathes' array.
How can I 'return' this data, so that other functions/etc can use it.
[Code]...
I have an issue where I am watching the value of: loaderInfo.url and sometimes it returns the url of my file just fine, example "path/myfile.swf and it is all good. Other times it will return path/myotherfile//[[DYNAMIC]]/9I found the following URL that explain it a bit
View 3 RepliesI'm currently working as part of team of developers and we've run into an issue with our FMS project.In our site the user is able to record video of themselves which is turned into flvs and stored by the FMS. These videos are played back at a later time. The site works fine but intermittently stops recording new videos or streaming previously recorded videos.The only solution at this point is to restart the server. The server logs show that the onDisconnect event handler is running when users terminate their sessions and we can see that the number of active connections does not appear to be exceeding the limit on the server. There are no runtime errors to indicate that anything has gone wrong.From looking at output from the app it just seems like the publish and unpublish event handlers stop running but nothing actually breaks.The user doesn't realize anything is wrong until they try to watch their videos only to get a blank screen.
We're wondering if perhaps it is a garbage collection issue? Either the garbage collector in the FMS is running and taking a really long time to reload the app or perhaps it isn't running at all and somewhere some memory is overloading.
I have created a class which loads the data from an xml file.
[Code]...
I'm trying to construct a "getter" function in which a movieclip obtains it's childs current frame label, but for some reason I cannot get it to work.
Part of Block.as :
ActionScript Code:
public function getStatus(acs:String):String {
return (MovieClip(this.getChildByName(acs)).currentFrameLabel);[code]........
There are 12 color variables, and each answer adds a number to each variable.At the end of the quiz, all the variables are put into an array, and sorted. Then the 3 highest variables are displayed. I have gotten this far. My problem is that I need to link the variable name (color) with the number it returns.[code]
View 2 RepliesI've created a function to send Post data to my server, and this then outputs xml to the page. What I can't find any information on how to get this data from the page back into flash.
View 2 Repliesi am trying to return an XML object, but having issues. The object is only created via an Event.complete function. I need to return the XML created from my loadXML function via my grabXMLfromFile function.
Code:
function grabXMLFromFile(attrPathToXML:String):XML {
var fileUrl:String = attrPathToXML;
var myUrlRequest:URLRequest = new URLRequest(fileUrl);
[Code].....
In terms of data integrity, I think having an object with its children as an ArrayCollection is just fine. So why is my AdvancedDataGrid renderProvider rendering each child node instead? I just don't get it. ( My renderProvider is a DataGrid ). This results in a new datagrid for each new item.Here's the code:
recalls.addItem(
new ObjectProxy(
{[code]....
Basically, a new DataGrid is being created for each element in the 'children' collection...instead of one datagrid being created and the 'children' collection populating it.
i was folowing the tutorial here about amfphp and loading mysql data, this worked very good. But i was wondering, is their a way to know how much kb in data u are loader?
Like the bytesTotal and bytesLoaded with a Loader / URLLoader?
After posting the jsp with username and password, i got following information from server.
private function CompleteHandler(event:Event):void
{
var loader:URLLoader = URLLoader(event.target);
trace(loader.data); \ trace the received data
[Code]....
How to get the user_currency_code , user_balance , usertypecode, user_id , respond ?
I am new to action script 3.0. o understand how can I load data with URLLoader.So, I have an aplication like:
var PATH:String = "http://www.somesite.com/myFirstPage.php?a=10&b=20";
var urlRequest:URLRequest = new URLRequest(PATH);
var urlLoader:URLLoader = new URLLoader();
[code].....
This is something I noticed on the Adobe documentation pages.
When receiving a textfile from a URL, the function to set the text will either look like this:
function completeHandler(event:Event):void {
var txt:String = URLLoader(event.currentTarget).data as String;
tf.text = txt;
[Code].....
I need a script that clears all the XML data from a loader (swf container).
How can I unload the XML cache so I can put new information to replace the old stuff?
I found out this will not work:
Code:
var Slice1:Sprite = new Sprite();
Slice1.addChild(evt.target.loader);
var Slice2:Sprite = new Sprite();
Slice2.addChild(evt.target.loader);
I found out the hard way what happens when you and the same object to multiple parents (it packs up, and moves out).So what is the work around for this, besides multiple loaders? LoaderMax? My evt.target.loader is an image. So maybe bitmap data?
I'm using a loader to make it so people can upload their own images to my swf. This is basically what code I'm using [code]...
View 9 RepliesI am having a bit of an issue with my traces not working. Basically I have 4 loaders that loads up XML data and displays it for it to be checked. My issue is that the first two traces work for the first two loaders but the last two traces do not work. Usually I get a 1009 error if I try to dig into the data.[code]...
View 7 RepliesWhy this does not work?...It should send and load Vars but it does not even trigger when complete...
var postVars:URLVariables = new URLVariables();
postVars.userId='cat';
postVars.folderId='dog';
var request:URLRequest = new URLRequest();
[Code] .....
in AS2, I used loadVars class to download data, but I am not sure if I should use loader calss or URLLoader for loading data in AS3.
View 1 RepliesI'm having troubles accessing the data loaded by external class.[code]...
Now, I want to create another external class (called MainMenu) that will be initiated from the Main class.This class should create the menu based on the loaded XML class.
My question is, how can I make use of the loaded XML content via XMLLoader class within the MainMenu class?
I am calling some data from php, which simply retrieves some data from MySQL. The tables retrieved are called dynamically and so I have a list of those tables sent to actionscript below and called by event.target.data.its and event.target.data.ces. These will have a list of the tables called. I then send the name/value pairs to actionscript from php by using those table names (all inside of php here) dynamically.
$sql3 = "SELECT * FROM `specialties`";
$getit = mysql_query($sql3);
while($row2 = mysql_fetch_array($getit)){
for($i=0;$i<sizeof($itlist);$i++){
[Code]....
I have been working on a flex application with java, as i have used Life Cycle Data Service for communication, i wana know, is there any function of flex, where i can see the loading status in percentage, that how much record is being loaded.Problem is, if there is lengthy record, no body comes to know, whats happening with software, like in Comboboxes or Grids, users usually think it as a BUG in application, but ofcourse it is not.I need such graphical loader, which keeps on loading with proper status in percentage, until it receives all data from JAVA (SQL Server).
View 2 Replies