ActionScript 3.0 :: When Use Alpha It Resets The Opacity To 100% Regardless Of The Number I Set It To?
May 13, 2010
I have 22 rollover buttons that are a tint. On the rollover, I want the button (75px square) to disappear. On the rollout, I want it to display it's original state.I can't use visibility because it causes a flicker. When I use alpha it resets the opacity to 100% regardless of the number I set it to - e.g. rollover {button.alpha = 0;} / rollout {button.alpha = 50;} still results in a solid box.
View 5 Replies
Similar Posts:
Feb 17, 2009
I want to have an object start off with an alpha of 0 but then opacity in to 100% later on the timeline BUT I have to use Actionscript.
View 6 Replies
Mar 1, 2010
I'm new to Flash and I am having trouble getting this alpha tween to work correctly. It fades and then sometimes returns to full opacity. If I keep clicking the button it will eventually ease out and stay transparent.
var myalphaTweencornerout:Tween = new Tween(corner_btn, "alpha", Regular.easeOut, corner_btn.alpha, 0, 1, true);
View 7 Replies
Nov 17, 2009
another rollover question dealing with changing the opacity of the button. Anyways. after digging through the site I found this:
[Code]...
View 1 Replies
Jun 10, 2009
I'm writing a base class for a clip that holds a scrollbar and some content. I written a function that runs every frame to check if the height of the content is smaller than the height of the available content area. If it is, the scrollbar hides. The problem I've run into is that when i trace the height, every other frame it comes back as 0. If I trace the same exact value when it's used in another function it comes back correct every time. If I trace it in my document class, it comes back correct. Any idea why it comes back zero in just this one spot?
enableScrollBar(); is the function in question
Code:
package includes {
import flash.display.MovieClip;
import flash.events.Event;
[code]....
View 2 Replies
Mar 13, 2007
I have attached the following to a button:
on (press) {
gotoAndPlay(1);
}
or
on (release) {
gotoAndPlay(1);
}
It is meant to take the user back to frame one where they can play a game again. The only problem is that it doesn't work. When you click the button it goes to the frame but quickly resets back to the frame where the button is located. I have put stop(); code where relevant. I am unsure on what to do. I just want the user to be able to go to different frames but the button keeps reseting to the frame where it is originally located.
View 5 Replies
Jul 20, 2011
I've been passed a flash file that uses the code below to move a set of images using left and right arrows. The user should be able to click through the series smoothly with no resets.
Essentially, the file looks like this: < (set 1) (set 2) (set 3) >
Each set contains the same 6 buttons. I added one button into the set, so now there's 7 buttons to a set. They overlapped, so I moved the left set over one button length and the right set over one button length.
After 6 clicks, instead of rolling smoothly through the buttons, it jumps back to the beginning. Did the addition of another button mess up the initial position or something?
Sadly, I'm more familiar with simple timeline and tween effects rather than this. Also, I'm using Actionscript 2.0 and CS4.
Code:
import mx.transitions.Tween;
Stage.scaleMode = 'NoScale';
var InitPos = 85;
[Code].....
View 0 Replies
Jul 12, 2010
I'm making a website. I'd love for a fish to jump up and eat a mayfly when the user rolls over the bottom of the screen. I know how to use the rollover script:
onClipEvent (enterFrame) {
if (this.hitTest(_root._xmouse, _root._ymouse, true)) {
this.nextFrame();
[code].....
View 1 Replies
Apr 17, 2009
I have some dynamic text fields in a frame called ExerciseFrame (which contain different random numbers, texts, ... and other variables.) When I navigate to another frame called helpFrame and back to the exerciseFrame again, all variables and text fields and other random numbers,... are reset. I mean text fields which contained many data in them becomes empty! I do navigation by a button in exerciseFrame with a simple
eventListener( gotoAndStop("helpFrame");
And in helpFrame another button with this code
(gotoAndStop("exerciseFrame");
How can I keep the state the whole exerciseFrame unchanged when navigating away from it and back to it again? version: AS3 - Flash CS4
View 3 Replies
Jul 16, 2009
I animate a DisplayObject with a Motion XML (exported from Flash). The first time I apply a motion to it, everything works fine. The second time I apply a motion, the position / scale is reset to what it was before I first applied a motion. How can I keep the transform of the DisplayObject after a motion is played when I want to play a new motion ? I want the DisplayObject to start from where it was at the end of the first motion.Here's the code I use:
private function animate(motionXML:XML, target:DisplayObject):void
if(!animator)animator = new Animator(motionXML, target);
// Add event listerners
[code].......
View 5 Replies
Mar 23, 2010
[URL]
I am using the same java server given there. and I am creating the XmlSocket in a flex air application. When I run my air application I get a java.net.SocketException connection reset at the java server.
Both are stand alone applications on my desktop.
Flex Code:
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" initialize="init()">
[Code].....
View 1 Replies
Oct 17, 2006
Basically I have an XML file that contains the paths of a few mp3 files. I have a Play button that plays them and a Next button that plays the next song on the list. These buttons work fine. I actually even am able to obtain and manipulate the songs position using the mySong.position property in order to display the songs position in the form of minutes and seconds.My problem is that when you click Next to go to the next song, the mySong.position property does not reset back to zero, like it should. So if you are 12 seconds into a song and you click NEXT, the next song starts to play fine, but the display keeps counting up from 12 seconds. I realized the .position property is read-only, so I cannot change it. If this is the case, then how does it ever reset, what causes it to reset?
I am loading the songs via the loadSound() method. Which means my only code on the Next button (other than to update some other displays) is:Code:mySound.loadSound("file.mp3", true);I do not need to use mySound.stop() to stop the previous sound, or even mySound.start() to start the new sound playing, it starts automatically. I tried using those commands and got the exact same results, the position property still did not reset.Am i missing something? I sure hope its painfully obvious and I just overlooked something simple cuz im getting a headache
View 9 Replies
Nov 12, 2009
I have this rotating slideshow. It works just fine when you allow it move through the four images that I want to display, it resets properly. I need to work on the 'next' button. It doesn't reset properly.
Code:
Select allimport gs.TweenLite;
//import fl.motion.easing.Quartic;
var slidePositions:Array = new Array(0,-1000,-2000,-3000,-4000);
var currentSlide:Number = 0;
var slideDuration:Number = 3;
getNext();
[Code] .....
View 1 Replies
Sep 27, 2005
I don't know how to do the actionscript tags so I am gonna use the PHP ones!
PHP Code:
function startTimer() {
initial = getTimer()/1000;
}
If this function gets called, what exactly happens here? Does it reset the timer? Or just gets the time the swf has been playing? Because when you use this mouse listener
PHP Code:
mouseListener = new Object();
mouseListener.onMouseDown = startTimer;
It actually resets the time everytime you mouseDown.
[Code] .....
View 3 Replies
Aug 27, 2009
im trying to make a new version of my game mad world check it out at [URL] Ok so basilcey what im trying to do is make it so when you go to a new frame, the new lv that the camerea resets to the new spawn place beacuse currently the camera stays were it was.
View 1 Replies
Mar 29, 2011
I'm using ColorTransform to fill in the colors for a few objects I have. Some of them with looping motion tweens. Whenever the motion loops, it resets the color to the default. Is there anyway to make the ColorTransform stick?
View 9 Replies
Nov 6, 2010
button to reset position (action-script 3) how do you make a button that when pressed it resets/changes the position of a object yes i am new to action script 3 but not to flash i want button to change the x y coordinates back to the original but dont know how?
View 1 Replies
Jan 19, 2010
I have a TextField that is formatted with bold and blue. However, when I change TextField.text, the formatting of the textfield resets and I have to setTextFormat again. This is the code I use to set my TextField. myText is the variable for my TextField. (This is just part of my code; it is part of a function for my EventListener.)
View 3 Replies
Nov 19, 2003
I have this movie [URL] its for a mates building company ok here is my problem (i will explain it to the best of my abilites) i have 3 buttons which each load 1 seperate SWF into an empty movie clip eg. servicesbutton loads services.swf into contentsMC that is fine that is working fine my problem occurs when the loaded movie button is clicked on again... it resets the loaded SWF back to frame 1... how can i make the loadmove command abit more cleverer? like dont load the movie if its already loaded?
View 5 Replies
Jul 11, 2009
not sure if this is technically "actionscript"but i didn't know wher eelse to post iti need to place an flv on top of a background image, and i want to set the flv to have an opacity of like 30%-
View 4 Replies
Jun 22, 2009
Can we change the layer's opacity in flash CS4? Such as change the photoshop's layer's opactiy.
View 3 Replies
Oct 15, 2009
is there such a thing as an opacity mask in flash? (like the one in illustrator--or something similar?)
View 5 Replies
Oct 23, 2010
[URL] i want the object to fade out but in the object there's a lot of overlapping pictures and each becomes half transparent. how to make the movieclip to change the alpha as it was without objects?
[Code]....
View 2 Replies
Dec 15, 2011
just spotted this curious trick. If you want to flip something to go invisible on a click, and then reappear on another click (etc etc), try this:
create the sprite, setting alpha to either to 1 OR -1
mySprite.alpha=1; //OR
mySprite.aplha=-1;
[code]....
View 9 Replies
Jun 27, 2003
using AS, on loading a movie a solid shape is there with alpha at 100% then over a period of 5 secs its alpha is reduced to 0.
i'm new to this......please help if you want to if you don't have a good weekend but think of me struggling onwards and upwards...
View 14 Replies
Apr 18, 2011
I am having a movie clip playing on a loop on the ON frame of a button , and something else on the OVER frame, and everytime i move my mouse to the button it resets the movie clips thats playing. heres my file:
[URL]
View 1 Replies
Aug 17, 2009
Just taking Koolmoves for a test drive and ran into a snag, I want to change the opacity of some shapes/objects that Ive created but I cant seem to find an option to adjust the opacity anywhere.
View 1 Replies
Oct 4, 2009
how to animate the movieclip opacity using Tweensy engine.
View 1 Replies
May 4, 2009
I'm trying to figure out how to make a slide bar that would control opacity. If I were to take to pictures on top of each other, the slide bar would control the opasity of the top image.
View 3 Replies
Nov 23, 2010
Suppose I have an image in the background with a white box over the image. What I am trying to do is get the box to oscillate it's _alpha property while diminishing to zero. Producing a 'twinkling' effect. I have the actionscript on the box_mc in an onClipEvent (enterFrame) function. Really there will be a lot of these boxes so the oscillation would have to be random.The code I have right now, which just lowers the opacity at a random rate - no oscillation is below:
onClipEvent (load) { h = Math.random();}
onClipEvent (enterFrame) { if (this._alpha>0) { this._alpha -= h;
}}
View 5 Replies
