ActionScript 3.0 :: Can't Access Movie Clips?
May 28, 2009I have created several movie clips in a loop.
Code:
for (var i:int=0; i<externalXML.videoClip.length();i++){
var linkHolder:MovieClip = new MovieClip();
[code]......
I have created several movie clips in a loop.
Code:
for (var i:int=0; i<externalXML.videoClip.length();i++){
var linkHolder:MovieClip = new MovieClip();
[code]......
i got a school flash project where i need to access the _y properties of many movie clips buttons that set with name like sel 1 sel2 sel 3 and so on the problem is i have 2 sets of those, one on the main timeline which i can access with "for" looped _root["sel"+i]._y and one which is inside another movieclip problem is i don't know how to access the later using for loop? this is the script that i used to access the _y on the _root.selx
[Code]...
I have a main swf called, main.swf; Inside it I load another movie, skin.swf (this has 10 movieclips in the library with linkage name). What I want is to attach the movieclips from skin.swf inside the main.swf.
But problem is I am not able to attach the movie clip in the main.swf from skin.swf.
Im trying to simply access a movieclip (movieclipB) which is nested inside another movieclip (moveclipHome). This parent movieclip (movieclipHome) has two key frames inside, one that contains movieclipA on the first frame and movieclipB on the second frame. I can easily access movieclipA on the first frame of the movieclipHome by using the following syntax[code]...
View 2 RepliesSo I am loading an SWF like this:
ActionScript Code:
public function layoutLoad(e:Event):void
{
FlashConnect.trace("Display.loadLayout()");
[Code].....
It will compile but I get a "Cannot access a property or method of a null object reference." So I am not targeting right. I did double check my instance name is correct and in the root of the loaded SWF
I need to know one thing regarding the accessing of movie clips...
How could i access the movie clips without placing on the stage?
[Code]...
So, can I access layers on this MainTimeline to get all Movie Clips on this layer ? So I can do a simple operation "A_1_2.buttonMode = true;" to all my MC's (in an array for example) without writing every line (lot of MC's on layer and lot of lines).
How can I access a movie clip's children (specifically child movie clips) in jsfl? [code]...
View 1 RepliesI have a ScrollPane " scrollPane1" that I need to access two different movie clips (allpages and courses). Is it possible to make a global as3 package so " scrollPane1 " can be seen by my movie clips ?
View 1 RepliesI have a flash project (.fla file) that includes an external actionscript package. Inside the package I am trying to reference buttons and movie clips that are in the main timeline, but it keeps throwing reference errors. [code]...
View 2 RepliesAll i really want to do is be able to affect multiple movieclips at once with event listeners and greensock tweens.
The first snag I hit was that I couldn't create references to movie clips using the old [] Associative array referencing method. Maybe I still can with AS3, but I couldn't get it to work...
So I found another technique using getChildByName that returns a reference to a movie clips and allows me to store that reference in a variable.
However, the movie clip I'm trying to affect with an event listener resides inside of another movie clips, so to build the address (aka, root.mc1.m2.mc3) to the mc I want to get to is proving to be difficult. (I'm very new to AS3...)
I thought the trace(target1_mc.target2_mc.name); at the bottom of the following code would output the name of target2_mc but it doesn't.[code]...
I have the following code...
[Code]....
The point of this code is to be able to search through previously duplicated movie clips to find the one that I am trying to access.... it doesn't seem to be working even though I have a similar routine that does seem to work. Anyone know of a better way to access/traverse the available movie clips to find the one I want?
I have a folder full of SWF files. Each SWF is its own animation. I have several people submitting their animations for this project. I would like to embed all these SWF's into my project and use .play() .stop() and other movieclip related commands on them as a whole. By this I mean, the artist sends me the SWF, my AS3 script embeds it, then I can access it with say animation_1.stop(); without the artist ever having to enter a instance name, or export for ActionScript name.
I plan to create a shell script which will take all the swf's in a folder and create a AS3 file with all the embed statements. The instance name that will be given to each one by the shell script will be the file name. Is this possible to embed a SWF and access it without giving any movie clips instance names or exporting for Actionscript? UPDATE: @annonymously answer below helped a lot. Here are some other resources that helped me: Great Resource - [URL]
I have a custom class I am working on, one of the methods is:[code]Inside that function a dynamic TextField is created called txtLoaded, it is declared with [code]mcProg is added to the stage, I see the txtLoaded txt field drawn as well and I can trace properties of mcProg from elsewhere in the class but I cannot access mcProg.txtLoaded from anywhere else in the class.I imagine this must be a scoping issue, with txtLoaded only existing inside the createProgress method, but is there any way for me to be able to access txtLoaded from elsewhere in the class?
View 5 RepliesI'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 RepliesI'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 RepliesHow would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
Does anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 RepliesHere's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 Repliesokay, i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect... my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect...
my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
also if you want to see what the problem is, here's the website in it's infancy (700k)
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 RepliesI have continually run into this so i guess i just don't understand some foundation to how AS3 works.
So, I have a movie clip in the library (ClipA) - it is linked to a class.
Inside Clip A there are 3 other Movie Clips (SubClip1, SubClip2, SubClip3).
When I place ClipA on the stage i want to adjust the frame that each of the SubClips are on.
BUT, when I try to set them to a frame in ClipA's class file i get an error like this:1061: Call to a possibly undefined method gotoAndStop through a reference with static type flash.display:DisplayObject.
[Code]...