I've got a small problem with my flash site. I've got imported html text on my site and scroll buttons on the side. But when you click on a button. It tends to not display the text properly when you scrolled down on a previous page. What I would like is that when you click on a button it unloads the previous text. Because I don't know what could be the solution for this I uploaded the .fla
View 1 RepliesI've got a small problem with my flash site. I've got imported html text on my site and scroll buttons on the side. But when you click on a button. It tends to not display the text properly when you scrolled down on a previous page.
View 2 RepliesI am trying to clear an input text field once reset is pressed.
I currently have
on (release) {
_root.textfield="";
}
on the reset button
and on the 1st frame of the reset button
function clearForm() {
textfield.text="";
}
Do I need both? I have tried 1 without the other and still no results.
I m using textarea. The problem is when i try to select a text and go out of stage and leave the mouse then again move mouse on text then selection of text will move with the mouse.
Here is what causes that:click somewhere on the text and drag the mouse in order to select the text then go out of the swf leave the mouse now move mouse on textarea -> the selection of text will move with the mouse...
How to stop this behavior?I tried to implement mouseleave on stage but the problem is i m not able to detect mouseleave event when mouse is pressed and it leaves the stage.
I have a function on root:
_root.fadeBox_mc.onEnterFrame = function (){
if (fade){
this.nextFrame();[code]....
This causes a mc to fade in and out on rollover/rollout. But what I wanna make is a box that fades in when pressed on the button and fade out when pressed for the second time. But if I say
on (press){
_root.fade = true;
}
the mc fades in, but I cant do another on (press) to fade out. Is this too confusing?
I m using textarea in flash 10 cs5 as3. The problem is when i try to select a text and go out of stage and leave the mouse then again move mouse on text then selection of text will move with the mouse.
Here is what causes that:
* click somewhere on the text and drag the mouse in order to select the text
* then go out of the swf
* leave the mouse
* now move mouse on textarea
the selection of text will move with the mouse. How to stop this behavior? I tried to implement mouseleave on stage but the problem is i m not able to detect mouseleave event when mouse is pressed and it leaves the stage.
This is because of wmode="opaque" parameter. I found out that it doesn't do this when wmode="window". Is there a solution for this?
I have an an array of objects. I populate the datagrid from the array. The nmber of columns in the datagrid is fix i.e.5 and the first column always shows serial number (0,1,2,3,4). I have a link button called 'CLEAR' in the last column of the datagrid.
1> How do I make the clear button visible only when the row is particularly clicked 2> When the clear button is clicked, how do I make the contents of that particular row cleared. Not deleted, only cleared to insert data again. Also, the serial number (0,1,2,3,4) should not be cleared, nor deleted. How to do this ?
I'm trying to create a set of 4 vertically arranged buttons that 'split' apart when those buttons are pressed. For example, if you click the topmost (1st) button, the bottom three buttons will drop down so submenus (for the 1st button) can now be revealed beneath. Again, when you click the 2nd button from the top, the bottom two buttons drop down, revealing submenus, and so on.
Now, is there a way that I can use actionscripting to tween the buttons to not only motion tween a drop down when a button is first pressed, but also to motion tween the button to return up to its original spot when another button is then pressed? Right now, I have two keyframes, side-by-side which each containing a different y-scale value for an object. Can I do some actionscripting to get the object to motion tween upward to its original spot instead of "clicking," or snapping back to is original spot when another button is pressed?
I want the press button to detect the last button pressed and if the shapes match, make them do something...obviously. I think I'm going at it the wrong way. I need to stick a "triange" id into the button/mc then if compares that and then if there is a match works then... right?
[Code]...
What button event should I use to make the program understands to DO SOMETHING only when the button is pressed/dragged. In my sample code below, I want something to happens only if the button is dragged beyond 200 in y axis. I tried onRelease, onRollOver and onDragOver but still not working
[Code]....
I have a series of buttons inside an array. I am trying to get the buttons so that once they are pressed, they remain in the over state. Which is a darker color than the up state. So that people know which button they have pressed. Is there an easy way to do this for buttons?
View 1 RepliesI'm creating my first website. I've managed to create a homepage. On the homepage is a enter site button, which once it is pressed starts thetimeline... I have an actions/labels layer which I am writing my code in. On frame number 'one' is my code below.
stop ();
enter_site_btn.addEventListener (MouseEvent.CLICK, buttonClicked)
function buttonClicked (event:MouseEvent): void
[code].....
I have a function that executes when a button is pressed:
btnRandomAll.addEventListener(MouseEvent.CLICK, clickHandlerBtnRandomAll);
function clickHandlerBtnRandomAll(e:Event)
{
...but, I need it to also execute once, upon the file loading.
I'm working on a game whose background has many layers that each scroll at different speeds.
Inside each layer I have a Sprite, I've started using graphics.beginBitmapFill, but what I've found is that the graphics.clear() function doesn't actually clear the contents set by the previous call to graphics.begin.BitmapFill. Each frame, I adjust the matrix to shift the layer as needed. Then, I call graphics.clear() and graphics.beginBitmapFill() with the adjusted matrix. Since my layers have alphas in the bitmap, I can see the contents that was drawn the previous frame.
I need a button to clear all the entries in the text fields of a form, so the user can clear all their entries and start again.
View 4 RepliesHow does one create a button or keyboard shortcut which deletes all text in the text field?
View 3 RepliesI am doing an animation of a system schematic I have had a weird thing come up with set interval.I have broken the animation down to three buttons a movie clip and a text field.When I call and clear the set interval from individual buttons the setInterval behaves correctly,but when i try and call and clear from one button with an if statement for a text field the setInterval will not clear.It also will not clear from the other button that is a set interval clear button that normally works.I have set the setInterval variable set to a number.Code Below and fla attached
[CODE]
boxmove=function(){
myBox_mc._x+=10[code]..........
I am new to Flash. I downloaded the whiteboard component and it is really cool. I am trying to include a button to the component so that upon button click all the drawings like rectangle, line, arrow etc., must get cleared.
View 1 RepliesFairly simple I would think but can't seem to find the right documentation to give me the answer.I have a form in flex that contains a number of checkboxes and the form has a reset button. I'm looking for the code to clear the checkbox.
View 1 Replieshow to clear the stage of everything I have loaded it with. This would be done upon click of one of the buttons I have on the stage. That button also needs to execute a different class I have programmed. You can even just tell me what to search under to find out this data.
Explanation: I have 2 different classes. Buttons class and Videos class. Buttons class loads the stage with 9 different buttons. Each button is supposed to lead to its own video. (I have the buttons ready with programming to load the video and all of the programming works).
The Video class loads the video onto the stage and has the controls for it to play, pause, stop etc (works pretty much..).
Now, I am not sure what code to put under each of the buttons to clear the stage and load the Video class.
I have 2buttons. Each have 3stages: up, over, down.I want to have 1st button to stay on its 'down state' when pressed and then you should see 2nd button 'up' stage(down stage of 1st button is the same as up stage in 2nd button).If someone hovered again you see 'over' stage of 2nd button,when will click, button move to 'up' stage of 1st button.
View 1 RepliesI have a mc which is 3 frames, with labels "Not Selected", "OverState" and "Selected". I add them to the stage with the first block of code, that is fine. The second block of code is my attempt to handle the states of the buttons. A selected mc goes to the correct state but it needs to go to "Not Selected" when another is clicked. My code does not do that. Also how do I handle the problem of MouseOver and MouseOut still working after a button is clicked?
PHP Code:
var numBtnArray:Array = new Array;
//add number buttons
function addNumButtonsToStage():void{
for(var i:int = 0; i < 4;i++){
var numBtn:numBtn_mc = new numBtn_mc();
buttons_mc.addChild(numBtn);
[Code] .....
I have a page with several input boxes and several instances of movie clips on the stage which have been added with addChild, what i want to do is make a reset buttun that clears all the input boxe and removes the movieClips so that the page looks as it did when it was first loaded but the help files are usless with a specific request like this.
View 14 Repliesi want flash enquiry form send and clear button script.
View 1 RepliesI have done an animation which includes a button that I want to use to start it. I've added action script to stop the animation on the last frame, I just have no idea what action script to put in to start it when the button is pressed. I have 14 layers + an action script layer. 7 of the layers are animated.
View 3 Repliesi have a menu, that works with a xml file.the xml has the specific code that triggers the .as file:
HTML Code:
<buttons>
<button name="HOME" linkType="custom" link="home.swf" />
[code].....
i have a movieclip with some buttons with blur, when you rollover on them they become normal, when you rollout they return blur.
what i would like to do is that when you press on of them it becams normal and remain in that state untill you press on onother button.
Is there a way to do this? maybe something that prevent onRollOut when you pressed the button?
My code:
Code:
import gs.*;
this.buttonMode = true;
TweenMax.to(this, 0.5, {blurFilter:{blurX:5, blurY:5}});
[Code].....
I'm making a screener keyboard, where the keys are buttons, The point is that I would like to simulate a key pressed for each button by a KeyboardEvent to write the charCode in a TextField, which I keep always in Focus.
[Code]...
i have designed button which will change position after press on it i have used the script :button1.onPress=function(){button1._y=-300;action1._y=110;}that is working but the problem is whenever i give a link to it like go to another frame or go for some url. it work but after comming back to its previous stage it shows no difference that means i need a button which will indicate that it have been pressed.
View 1 RepliesBasically what i have is three buttons which can be pressed in a maximum of 7 different combinations. Each of these buttons has a movieclip underneath that advances to the next frame when the button is pressed. Each clip has two frames with actions, frame 1 has:
stop();
var option1:Boolean = false;
and then frame 2 has:
stop();
var option1:Boolean = true;
So when you press a button you have true, and false when the button is pushed again.
i already have a constant loop between frames 2 and 4. At frame 4 i think i need to have some code that detects which state the 3 boolean statements are in and then load a movie depending on which statements are true and which are false.