ActionScript 3.0 :: Detect Width And Hight Of Image Loaded From XML
Apr 26, 2010I am loading images from XML and i want to detect its height and width [code]It shows 0 ... how can i trace the actual width and height of images?
View 2 Replies
Similar Posts:
ActionScript 2.0 :: Set Boundaries For Swf,so The Effect Only Works On File's Width And Hight?
Jul 16, 2008I have a file which contains a mouse follow effect.Is it possible to set boundaries for that swf,so the effect only works on that file's width and hight?So,if it is loaded in another swf,it doesn't affect the whole screen.Just the particular boundaries that have been set.
View 2 RepliesIDE :: Detect Width Of JPG Dynamically Loaded Into Blank Movieclip?
Feb 4, 2009I am loading jpgs into an MC. I make sure I wait to run and modification to the MC by confirming the image is loaded first.If I comment out the IF statements within the function "RW_pic_modifications()" and I trace the width and height of the MC AFTER each photo is loaded, I successfully trace the correct W and H.
My issue, however is when I DO RUN IT THROUGH the conditions within the "RW_pic_modifications()" function. Then any modifications to the MC W and H seem to compound and apply it to each iteration of the next MCs.I confirmed that my code and logic is correct. I just dont understand why performing a resize to the MC with one jpg loaded into it is not reset to the NEW JPG loaded into it, after the new JPG is loaded.
NOTE - I have an MC that stops on a frame until all the code here is executed. Once complete, then this MC plays to allow the pic to stay on screen for a given amount of time THEN it calls on the RW_Pauser() function.I am way over deadline.
Code:
How_long_to_pause = 4000;
Maximum_Image_Width = 137;[code].....
ActionScript 2.0 :: Get Loaded Image Width?
Jan 12, 2009I have created some movie clips dynamically using createEmptyMovieClip. Then I am loading images into the clips using the MovieClipLoader. In the onLoadComplete of the loader I am trying to position the clips based on the _width and _height.
I would think that since the clips are loaded as indicated by the OnLoadComplete firing they would have a _width, but it comes up as 0. What gives?
ActionScript 3.0 :: Get Width Of Loaded Image?
Jun 29, 2009I have a simple gallery where I'm loading thumbnails from an XML file.
The thumbnails are loaded into a containing MC (thumbCon), I want to be able to space the thumbs using the width of the thumbs.
How do I capture the width of the loaded thumbs?[code]...
ActionScript 2.0 :: Get Width Of Image Loaded?
May 15, 2007how do I get the width of an image dynamically loaded using MovieClipLoader's loadClip method? i tried
Code:
listener.onLoadComplete = functon(holder){
variable = holder._width;
}
ActionScript 2.0 :: Getting The Width Of A MovieClip After New Image Was Loaded On It?
Aug 22, 2010I'm doing an image gallery from xml file, and the thumbnails have diferent sizes. Around the thumbnail there is a border, both are diferent movie clips (thumb and border). they reside inside a main movieclip wich is being duplicated.
So I need to resize the border according the new size of the thumb movieclip, but flash actually gets the value from the starting value of the thumb, not the size after the file was load on to it.
I just thought flash would read the new value if i set the var for the width after the load movie, but that ain't happening =(.
My code so far:
Code:
function createButton(newObj, thumbNode, bigImageNode){
duplicateMovieClip(thumb_base, newObj, depthCount++);
var tempName = eval(newObj);
[Code].....
ActionScript 3.0 :: How To Check Width Of Loaded Image
Dec 16, 2009my script loads an image like this:
image = new Sprite();
imageLoader = new Loader; imageLoader.load(new URLRequest(imageList.image[1].imgURL)); image.addChildAt(imageLoader, 0);
[code].....
ActionScript 2.0 :: Find Width Of Loaded Image?
Oct 1, 2006What I want to happen is a movieclip of text aligns 20px to the right of the loaded img, similar to what padding does in css, the code I am using is: textFields._x = (picture._width+20); textFields is the movieclip of text and the image is loading into picture
What actually happens is the the text aligns to picture._width but before the image the image has loaded or I am not telling it the right place to look for ._width
I'll include the .fla in for convenience
ActionScript 3.0 :: Detecting Image Width/height Loaded By XML?
Dec 26, 2009I am able to load images into my file by designating their locations in an XML file using AS3. I'd like to be able to determine the width and height of the individual images without having to manually enter each one into the XML file.I think once I reach this point, I'll be able to figure it out on my own:I want to be able to load an image to the stage and trace its width.
View 6 RepliesFlex :: Width/Height Of Dynamically Loaded Image?
Nov 16, 2009In my Flex application, I've got a component that extends UIComponent where I'm loading images at runtime and try to display them. I've tried lots of different approaches (using beginBitmapFill(), using different containers), but I can't get things to work as I want. The problem seems to be related to the width and height properties of the image, which aren't updated correctly.The idea is:
var sprite:Sprite = new Sprite();
addChild(sprite);
var im:Image = new Image();[code].....
The image's width and height doesn't seem to be correct when it's loaded. I get width==0 (and nothing is displayed), but the property $width seems to be correct. How can I assure that width and height of the loaded image is updated?
Actionscript 3 :: Calculate The Width Of An Image Loaded Into A Movieclip?
Jun 8, 2010I am loading an image into a movie clip via AS3, and what I want to do is center the image inside the movieclip. The problem is that I can't seem to grab the width value of the image being loaded. Below is what I'm doing:
imageLoader = new Loader();
imageLoader.load(new URLRequest(event.target.name));
screenBox.screenHolder.addChild(imageLoader);
trace(this.imageLoader.width);
When I trace the width, it always comes back at zero(0) even though there is an image inside the imageLoader. What is it I need to do to find the actual width so I can center the image?
ActionScript 3.0 :: Finding Width / Height Of Loaded Image
Oct 7, 2009I am loading in a list of thumbnails from an XML file. The images are not always square but one of the dimensions is always 50pixels, whether it be height or width. Occasionally an image IS square. I am creating a 52x52 sprite and adding the loader image as a child to this sprite centrally. To do this I need to know the dimensions of the loaded images. (the loader object). Everything loads, parses and displays as it ought to, I just cannot find the width/height of the loaded image. Pics1List is an XML file.
ActionScript Code:
var imageLoader:Loader;
var request:URLRequest;
for (i = 0; i < (pics1List.picture.length()); i=i+1) {
var picture:MovieClip = new MovieClip();
imageLoader = new Loader();
[Code] .....
As you can see, I tried a few different things and frankly in the end just tried each combination I could!. The closest I got was when I used imageLoader.contentLoaderInfo.width and the error message was "The loading object is not sufficiently loaded to provide this information." which is why I added the event.complete function. However, this function never triggered so I commented it out.
ActionScript 2.0 :: Change The Height And/or Width Of An MC After It Loaded An Image (xml)?
Aug 2, 2006Is it possible to change the height and/or width of an MC after it loaded an image (xml)?
I made an upload page for images and a xml file to read the records from the database. So any image size is possible. but it must be like 100x100 pixels (just an avatar kind of size).
Do i need to do that with php or is it possible with A.S. 2??
ActionScript 3.0 :: Detect Width At Specific Y Value?
Apr 28, 2009I have a MovieClip that has a bunch of MovieClips inside it. I am trying to figure out how wide the MC is at a specific y value. Not sure if there is an easy way to do this.
For an example.
Code:
OOOOOOOO
O O
O O
[code]....
This is the shape of the MC. It is not solid all the way through, it has MCs strewn about inside this outline. I am trying to figure out how wide it is from, say the second 'O' from the bottom. Left to right. The actual MC.width would be 12 'O's wide. But at that bottom portion, it would be 10 'O's wide. I'm not sure how I can do this.
ActionScript 2.0 :: Can't Detect Screen Width
Oct 13, 2003The problem that I'm facing is in regards to the width of a sliding menu that I've created. The menu slides based on mouse x position and width of the movie. I would like the menu to fit to the entire screen regardless of the users resolution. I wanted to know if there's a way to detect a users screen width and then adjust the variable for screen width within my actionscript.
View 10 RepliesActionScript 2.0 :: Rescale Browser/flash Movie Hight?
Aug 29, 2009i want to rescale my website height after its content height, hope this makes sensei have my website with a header and menu at the top and below them the content loads. the content for the first loaded page is of about 1000 px high, and for a third page is of mb 500 px, wich when i load leaves my browser with 500 empty px at the bottom, and u can sroll it in that area, seems kinda uncool.
View 9 RepliesActionScript 3.0 :: Detect Converted Width Of String?
Nov 6, 2009I'm setting up a menu system powered by an XML feed that will have everything created dynamically (graphics, textFields, etc), and I've started pondering something...Since the menu will essentially be in list form, with each button stacked on top of the other, and since the titles will be passed as strings out of attribs in the XML, I was wondering if there was a way (there has to be) to essentially define a width of the text box, but leave the height open, allowing for multiline = true;, and then to dynamically draw the button graphic based off of either the height of the textField or the number of lines the textField uses.
Will this just be a matter of ordering, in that I won't actually draw the box until the textField has been set up, and the title passed to it? That way, the get height method would return the height of the box with the text in it, and I can adjust accordingly? Or should I try to base it off of the number of characters that will be passed to the box, and just set a limit via modulo or something else to "catch" when it goes to the next line (The problem I see with this is that not all characters are == when it comes to width. "i" < "e" in terms of character width, but they are both just single characters).
I would prefer to set something up that auto adjusts, as this list will be changed in the future, and I have no way of knowing if the titles will be a uniform/won't exceed a certain length. I could try to just "go big" to make room, but then you end up with boxes that look empty, and if I undershoot, I've got to go back to code.
ActionScript 3.0 :: How To Detect Height And Width Of SWF File In Loader
Dec 19, 2009I am loading an external swf file using the following code:
//add close button
var reqButton:URLRequest = new URLRequest(btn_close);
var loader2:Loader = new Loader();
loader2.load(reqButton);
addChild(loader2);
[Code] .....
Once the loader loads my image, and I click on it, nothing is happening. Am I supposed to be adding the EventListener to the loader or something else? How can I detect the height and width of the swf file in the loader?
Flex :: Detect Screen Width/height Change?
Dec 2, 2010I have objects placed on the screen using x/y coordinates. I want a way to update that based on changes in Screen Width/Height. So if used re-sized browser window x/y should change. How do I cick off a function every time the screen is re-sized.
View 3 RepliesActionScript 2.0 :: Make The Fish Detect The Width Of The Aquarium?
Jan 11, 2006i already finish my memory game. now i am working on this fish...i have a fish movieclip. i use actionscript to make it move.here is the code Movement Actionscript Tutorial
[code]...
this fish is inside the aquarium, so how can i make the fish detect the width of the aquarium so it won't go outside of the aquarium.
Flash :: Video In CS4 - Importing An Image To Stage And Set The Width And Height To Match The Image
Nov 8, 2009I have a Flash CS4 Professional version installed in my machine. Here is my problem.
1st - I'm importing an image to stage and set the width and height to match the image. (everything is good, no problem) 2nd - I am using the FLVPlayback components build-in from Flash CS4. It does load the video and everything. (everything seems good) 3rd - Publish the video to my local drive (everything seems good) 4th - I could play the video from my local pc and it loads fine and fast 5th - Upload everthing from my local folder to the Web server, it does display the background image but not the video. It has a white blank screen. What is going on? I copy the exact folder from local to server. What have I missed? How could I make the video to load?
ActionScript 1/2 :: Load External Image Of Different Height & Width Into Same Height And Width
Jun 12, 2009i want to load external images of different height and width into same height and width.
View 3 RepliesActionScript 2.0 :: Load External Image Of Different Height & Width Into Same Height And Width?
Feb 24, 2010i want to load external images of different height and width into same height and width.
View 0 RepliesActionScript 3.0 :: Getting Width From A Loaded SWF?
May 1, 2009I am having an issue with pulling width and height from an external swf.
I can load it ok, and place it ok, but I want to shrink it when I place it and that is where the problem occurs. Here is the abridged code. The odd thing is that if I move the width and height lines inside the function, it works. Trouble is every time you click that tab the swf shrinks a little more.
Code:
//------------------Calling the external SWF and loading it-------------
var myRequest:URLRequest = new URLRequest ("images/filter.swf");
var myLoader:Loader = new Loader();
[Code].....
ActionScript 2.0 :: Getting Width Of Loaded Movie?
Jun 4, 2009is it possible to get the width of a loaded movie? for example:-
Code:
_root.createEmptyMovieClip("pic", 1);
_root.pic.loadMovieClip("pic.swf");
trace(_root.pic._width);
From the code above, my trace outputs (0), ignoring the width of the loaded pic.swf, has anyone ever encountered this or a way around it?
ActionScript 3.0 :: Get Stage Width Of An Loaded Swf?
Sep 21, 2010Is there any way to get the real stageWidth of an loaded swf? The problem comes when the loaded swf has some elements outside the scene. In this case content.width becomes bigger then the scene. My code looks like this:
[Code]...
ActionScript 3.0 :: Getting Loaded .swf Width + Height?
Feb 14, 2011Why is this not working?
ActionScript Code:
var ld:Loader = new Loader()
ld.load(new URLRequest("bi.swf"));
trace(ld.width);
addChild(ld);
It loads and is added just fine. But I need to know it's width in order so that I can center it better.It says that the width = 0?and if i do this...
ActionScript Code:
var ld:Loader = new Loader()
ld.load(new URLRequest("bi.swf"));
addChild(ld);
trace(ld.width);
I get the same result that the width is 0?
Actionscript 2.0 :: Loaded Movie Width Not Set?
Feb 15, 2009I am loading several movies into a main movie. I'm using moviecliploader class.loadMovie with a listener object.On LoadInit sets the dimensions and position of the loaded movie.With one of the movies this works fine, but with the other, as soon as I set the width, the movie disappears and on tracing the width following setting it it turns out to be 0.I've just returned to actionscript after a month and I have a memory like a sieve. I'm sure I remember this happening before but I can't remember what I did.
View 1 RepliesActionScript 2.0 :: Width Of A Dynamically Loaded Jpg?
Feb 12, 2004I'm loading a pic using a config file like:
[AS]
onClipEvent (load) {
loadText = new LoadVars();
[code]....