hi, below is some code I am using to load buttons from an xml doc, the xml part is working and the buttons are place on the stage. I am having trouble with accesssing the individual movie clips. in the function showtitle you will see the error messages I get. I am assigning the names a0, a1 and a2 to the movieclips if I use a trace statement in marker it gives the movieclips names as being a0 a1 and a2..
[code]...
I'm getting crazy with this error and found no solution until now. Well, the issue consist in create dynamic movieclips and external jpgs into a for loop through xml nodes and add the respective image into that movieclip.
[Code]...
I've created an XML thumbnail gallery, and would dearly love to add a simple looping preloader animation to each of the thumbnails whilst they are still loading. I'm struggling to remove the preloader movieclip, once the corresponding image has been loaded.
I'm currently creating the new movieclips within the loop, so I'm having problems referencing them in the following load complete function. I gave naming the "spin_loader" instances a go (i.e. spin_loader.name = "spin" + i), and then trying to remove it in the "thumbLoaded" function ( i.e. project_mc.removeChild(getChildByName("spin" + spinNum)), where spinNum is the equivalent number to "i"), but I just can't seem to crack it.
Code:
function createThumbs()
{
for (var i:Number = 0; i<my_total_project; i++)
[code]....
I want to create dynamic movieclips inside another dymanic movieclips.Here's what I came up with:
Code:
function prepararConteudos():void
{
for (var j:uint = 1; j<=numMenuWeb; j++)
[code]....
I'm adding a child to "fundoConteudo_mc" with the instance "mc_contentor", which works fine. But when I try to add a child to "mc_contentor" i keep getting the "A term is undefined and has no properties" error.
I am trying to simplify things by using dynamic MovieClip names. I have three MovieClips on the stage.
1) mcPage1
2) mcPage2a
3) mcPage2b
But my code isn't working. I'm guessing the "this" part is what is messing it up. Thinking that the computer doesn't know which MC is "this". It traces fine outside the function, but inside the function it traces undefined.[code]
Been working w/ Flash for some time now, but mainly on the timeline and only a bit with AS. I am working w/ a tutorial:
[URL]
This particular portion of code is supposed to center the movieClip to the stage, but it is not working for me
target_mc._x = (Stage.width - target_mc._width)/2;
target_mc._y = (Stage.height - target_mc._height)/2;
I added some animation to it as well here:
var xScaleT:Tween = new Tween(movieClip, "_xscale", Elastic.easeOut, 50, 100, 3, true);
var yScaleT:Tween = new Tween(movieClip, "_yscale", Elastic.easeOut, 50, 100, 3, true);
And added this part just in case the tween was affecting it:
var xPosT:Tween = new Tween(movieClip, "_x", 0, (Stage.width - target_mc._width)/2, 3, true);
var yPosT:Tween = new Tween(movieClip, "_y", 0, (Stage.height - target_mc._height)/2, 3, true);
But it only fixes the centering on the y-axis.
After a click event I want to dynamically create 2 movieclips with the sequential number in their name, e.g. mc_001 & mv_001 so that I can 'link' them together later on.How can I create a movieclip with a dynamic name?I am trying to use this at the moment:Code:var movieclip["name"+dynamicNumber]:MovieClip = new MovieClip();I can't use an array unless someone can tell me how to access it across multiple classes...
View 6 Repliesi've been working on a project based on this tutorial: [URL]it's an interactive/searchable bibliography. Search for an author, get a list of papers all writen by that author. in this list of results, i want to add a button linking to a pdf. i've done projects in the past linking to pdfs via .exe/.bat files but never dynamically. i've learned how to add <img src> code to link to library movieClips, but i can't figure out how to add functionality to said movieClips. is there a tutorial, where i could learn how to have the XML file tell flash not only to add a specific movieClip, but how that movieClip behaves (ie - which pdf to link to).
View 6 Repliesthe code places 10 movieclips on stage and gives them name ranging from snipper1 to snipper10, now I want to display in each movieclip the correct image and tekst, which is given by the XML file, so for movieclip snipper 1, image snipper1.png and tekst Theme1 should be displayed.p.s. Does it make sense to import the XMLNode and XMLNodeType class for this purpose??I have this code:
Code:
import flash.xml.XMLNode;
import flash.xml.XMLNodeType;
[code].....
How do you do something like
["button"+num].gotoAndStop(2)
eval("button"+num].gotoAndStop(2) doesn't work either?
Also how do you do _root.?
[code].....
I am trying to construct a MENU with 5 buttons and a dinamyc instance for them (to manipulate later ) so i am having some problems..
// vars
var allButtons:int = 5;
var espacing:Number = 10;
var navBar:MovieClip = new MovieClip();
[code].....
I have a flash file with about 32 empy MovieClips on the stage.Basically what I need to do is take an array of images and load them into these empty MovieClips. Hope this makes sense so far.This array will be dynamic and will come from a PHP file.The problem is I'm not sure how to do this? I don't know to take an array in flash and allocate the images to individual MovieClips.
View 1 RepliesI have a dynamic text box in a movieclip called ScoreText. On the root timeline I have a variable called "Scorevar". I used "ScoreMC.ScoreText.text = Scorevar;" to display the score, however it won't change. It just stays at zero.
View 1 Repliesim practicing on how to do websites in flash cs4 using AS3.0, so im doin a basic dynamic test website, all the codes seem to be fine because i dont get any compilers errors. but one Error that is driving me nuts is the Error #1009 which says.
[Code]....
I recently started learning Flash and Actionscript and now I'm trying to write an actionscript for the first time. Im doing this in Actionscript 2.0.I have a movieclip that consists of two images and one dynamic text field with a variable. The name of the images are "VS1_P1_RUN" and "VS1_P1_OFF" and the name of the dynamic text field is "pumptext". In the dynamic text field I have the variable "VS1_P1_Ind". VS1_P1_Ind is probably a boolean variable as it shows 1 or 0 in another program but in Flash it shows True or False (not sure if Flash thinks it's a text/word or a boolean).My script is supposed to display the image named VS1_P1_RUN if the variable of the dynamic text field pumptext shows the text True and it goes like this:[code]
So I'm completely stuck in what to do. The bottom code works as it should but I want the images to show depending on the value of the variable VS1_P1_Ind. I thought just changing the text field to dynamic and typing the variable name in the variable field would do it but no.If it could be a clue to the solution I'll also share that the value of the variable is not seen/shown in textfield while inside the movieclip. Creating a dynamic textfield outside of the movieclip shows the value of the variable just fine, True/False.
I am trying to make hitsplats that are activated when I hit an "Attack" button on my main layer. I have placed a Dynamic text box with the variable Hitsplat and I made an animation with stop(); on the first frame, having it off of the stage. what can I do to activate the hitsplat, and change the number in it, to the damage being dealt by the button? [code]hitsplatmc would be the movie clip containing the dynamic text I wish to become the dmg and move upward. I am assuming the problem lies with the fact that _root.hitsplat lies in another MC.
View 1 RepliesI'm trying to dynamicly create movieclips that I can drag and drop. Here's what I'm trying to reproduce dynamically: (I placed 2 movieclips on my stage and named them mandible_mc and vertibral_mc)
mandible_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);mandible_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);vertibral_mc.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);vertibral_mc.addEventListener(MouseEvent.MOUSE_UP, dropIt);
function pickUp(event:MouseEvent):void {
[Code] .....
Here's what's happening:
Unless I have actually placed two movieclips on the stage and named them mandible_mc and vertibral_mc, I get an error. If I DO have those to movieclips on the stage, I get no error and I get my instances of "name_box". But, I can't drag them. I CAN drag and drop instances of mandible_mc and vertibral_mc so I know the addEventListener and buttonMode "thingys" are being created.
What I'm trying to do is, generating some movieclips in a loop and putting them into an array and then enumerating the array and set an endpoint for each instance of that movieclip:
mc[i].onEnterFrame=function(){
this._y -=8/N;
if((getTimer()-lastT) > myLevel){
this.onEnterFrame=function(){}
}
}
lastT is the time where the scene was run for the first time. So i'm comparing the time for each instance to that "initial time" and check if its larger than myLevel which varies for each of the instances. So this code first runs for all the instances, each having a different "myLevel", then I expect to see they moved differently. But the result I currently get is all of the instances move to the lowest "myLevel" value and then stop.
I have done this same thing in ActionScript 3, but am not familiar with ActionScript 2, which I am forced to use for this project. I am loading products into a SWF via XML and attempting to add a click event to each dynamically-created movieclip. Simply tracing the text from a node in XML will do for now. I'd like to assign a property called "desc" or "description" to each movieclip and have it trace that property's value when clicked. Here is the relevant portion of my code as it stands[code]...
View 1 RepliesI'm trying to add an instance of a MovieClip inside an array. Inside the House Class is a property called HouseObjects. Inside that array, I created a Comp and a Light class. MovieClips are dynamically placed on the stage, via linkage. The MovieClips also act as "toggle buttons." If the button state is ON, value is 1. If the button state if OFF, value is 0.
If the value is 1, I am trying to add MovieClip instance inside the onList Array. Inside that array will be all the instances that have a button state ON.
I created a property called objSelect.
var objSelect:Object;
That variable holds the currentTarget selected. I'm trying to pass it to function trackItems to either push/pop it in the onList array, based on the button status.
I receive an error for this line:
onList.pop(objSelect);
Incorrect number of arguments. Expected no more than 0.
public class House extends MovieClip
{
[Code]...
I need to load in xml text to dynamic text fields inside duplicated movieclips. is it possible to do that? I'm using AS 2.0.this is my hierarchy: parent.btns.intNavbar.label_mc.buttText.the attribute name in my xml is menuText.this is my code: (intNavbar is the main movieclip I'm duplicating)
Code:
duplicateMovieClip(_parent.btns.intNavbar, "nav"+num, _parent.btns.getNextHighestDepth());
navRef = _parent.btns["nav"+num];
[code]........
I need to dynamically attach a movieclip from a library and then make it move across the screen.This is quite easy for one movieclip instance, but what I need is to have movieclips spawn at regular intervals then move accross the screen.[code]My question is, how do I continuously attach movieclips without making so many variables? Is my method of attaching even alright for this purpose?
View 2 RepliesI want to save dynamic movieclips as jpg/image Basically i have several dynamic images, then i make some addition into it (like adding images in it) and then i want to save the movieclips as image(or jpg).I searched in google and i found bitmap exporter and sephiroth examples. But problem is that i dont know how to use them as I am not able to get .fla files in either of the examples.
View 6 Replieswhat I'm trying to do is attach instances of a movieclip on stage, one by one, so they form a shape similar to one of examples below...(each dot would be a movieclip)I know I should do it using loops and probably sin/cos math methods, but am not sure where to even star
View 1 RepliesI dont know how to do this, i am trying but i cant, [code]...
View 9 RepliesActionScript Code:
_root.mc.duplicateMovieClip(mc1, 99, {mctext:"this is mc1", _y:200, _x:200})
_root.mc.duplicateMovieClip(mc2, 98, {mctext:"this is mc2",_y:300, _x:300})
This is really drive me crazy! Why won't this work? I have tried
ActionScript Code:
eval(mc1).mctext = "this is mc1"
and it didn't work. I have also tried
ActionScript Code:
_root[mc1].mctext = "this is mc1"
but still it didn't work.
EDIT: I added the file
I intend to make a Custom ScrollBar that would work with Loading dynamic MovieClips upon runtime. I want the ScrollBar to scroll through those MovieClips.
What i am trying to do exactly: I want to create a "who's online" Something, add a Movieclip with information of the client to that 'Something' and use a Custom ScrollBar to scroll the content(dynamic-added MovieClips) of that Something.
I load an XML file and through it create several Movie Clips. I want each movie clip to have a rollover and mouse click event, yet assigning the events does not seem to work at all. Here is how I create everything:
ActionScript Code:
var parsed_obj = new Object(); //This will hold the parsed xml data (once the XML loads and gets parsed).
XMLParser.load("xml/test3.xml", onFinish, parsed_obj);
function onFinish(success_boolean, anXML, xml) {
//This function gets called when the XML gets parsed.
if (success_boolean) {
LoadImages(anXML);
CreateAlphabeticalArray();
[Code] .....
When the XML successfully loads, we put it in a global variable and then create images based off the xml data. It might be a little verbose, but it gets the job done for now. I tried several methods creating objects to hold the events and attaching them, just using .onRollOver = function() { trace("whatever") };, etc. The code is on Frame 1 of the time line and not attached to anything. I experimented attaching it to a movie clip and doing onClipEvents, but that breaks the rest of my code because there are various sorting functions and button presses that don't get called.
I have been working with AS2 for a long time, but are a total newbie when it comes to AS3.On my stage I have placed an empty MC with instance name "holder".In my library I got a MC linked by the name "sektor".
"sektor" has several movieclips and buttons with instance name, e.g. "corner1", "corner2", "corner3"....
I have nested "sektor" inside "holder" by writing this code:
Code:
var newClip:sektor = new sektor();
newClip.name = "sektor1";
holder.addChild(newClip);
What I want to achieve is to control those movieclips inside "sektor" by turning dem on/off.I have tried to do this with this code:
Code:
holder.sektor1.corner1.visible = false;
but I keep on getting this error:
"TypeError: Error #1010: A term is undefined and has no properties."
I have figured out that by tracing holder, I know it�s excisting (Result: [object MovieClip]) but if I try to trace holder.sektor1, I got the result "undefined". So it seems like "sektor1" is not excisting. Why?
I am trying to create a menu which is 100% on the fly. the menu item names are stored in a multidimensional array with attatched sub menu items/names. I am trying to create a mc and a txt field for each item in the top menu. I am trying to also store the newly created mc's and txt fields in an array or their own so I can manage the menu motions/tweens better. However, I get several errors, why wont this work?
Stage.scaleMode = "noScale";
Stage.showMenu = false;
//Global TimeLine Reference
_global.gTml = this;
[Code] .....