I need to convert swf to video dynamically like here:
[URL]
(well I think that they are have video templates in swf format that accept dynamic variables and then that swf is converted to video, If I am wrong let me know too)
I have a swf that accept variables dynamically also I have found some material for flv writing using actionscript here: [URL]
Also I have checked ffmpeg for converting flv to mp4
I'm making a site in flash and I have a video in the middle that autoplays when you come on the site. I have used Adobe media encoder to convert a test video to a .flv and just embedded it into the flash. This really increases the filesize and I don't want to wait long everytime I upload the swf to our FTP server.
I know there is a way to make sort of placeholder using getVideo (or something like that), but I didn't manage to make it working.
How can I convert the pdf to swf ? I have to display it in my page.Is it possible to convert online pdf to swf dynamically?
View 4 Replies[URL]
it doesn't play smooth, how can I put a preloader to this? where should I attach the event listener?
I need to load dynamiclly video in flex video player on the web,I'm using standard video player component,when page load a want to load a video in it.I'm not flex programmer
View 1 RepliesIs there a way i can convert my array which is in the below format[code]...
Tricky part here is, i will not know how many values/lables user will enter, so it has to dynamically pick the array's.
How to convert an image to a button through actionscript 2 (flash mx 2004)? Is it necessary to convert it to a button or there is an event so that if someone clicks on an image, he will go to another frame. I load images into my flash through an xml file and i need an event so than if someone clicks on an image, he will go to another frame.
View 1 RepliesI have a project which has loads of FLA's with embedded textfields on the timelines. We now need to localize this project into Arabic, with right-to-left text (pulled in from XML) - my understanding is that this is only possible with TLF textfields.
It's going to be a huge task to manually convert all these texfields to TLF. Is there a way to programmatically set a normal textfield to be a TLF textfield?
I'd already posted this question as a reply in a discussion of one of my own earlier posts.. But i needed to draw attention to this problem of mine particularly. so m posting this as a separate question..I need to convert a movieclip dynamically into a vector or some picture format and save it to disk. is that possible? i have almost no knowledge what EPS format is
View 1 RepliesI have made presentation in flash cs4. I have one main file Index & loading rest all the files through LoadMovie.I want to convert my presentation into AVI for video but when i export it in avi so it converts in AVI but its not taking the file which m loading externally & not even converting the movie clip.i want to convert my presentation SWF files to AVI.
View 4 RepliesHow to convert any kind of videos into .swf format automatically?
So if the user uploads a video in a format from the example inputs how should I convert it automatically into sfw format?[code]...
I recently got a project in which i have create a whole set of flash animations and then convert them into video to be put on dvd. Now since they are going to be put on dvd's so there is not going to be any user interaction but a continuous playing stream.
I was thinking of putting all the texts into xml files and then calling them in the flash file but if i will have to convert them into video file then will the video file work the same way as the flash file?
i set up a function to check and display the duration of my video in a dynamic text field. It works fine but I am trying to have it display as min and sec.(00:00). What would be the best way to do this?
Here is my code so far:
var playProgressTM:Timer = new Timer(100,0);
playProgressTM.addEventListener(TimerEvent.TIMER, playProgressHandler);
function playProgressHandler(evt:TimerEvent):void
[code]...
I want to convert a ByteArray wich contains a .flv file read through a socket connection to a video playable object and play it, or attach it somehow to the netstrem as its source. Why this ? I'm trying to write an app using AS 3.0 that connects two swf clients to each other directly without a server (after they know of each other) and allow them to exchange video sequences. So the reverse way video -> bytearray -> network -> reciever ->video would be of interest aswell.
View 5 RepliesI want to convert swf slideshow to video using php / asp.net, how can such thing be achieved , i tried ffmpeg but it discards effects in the slide show.
View 3 RepliesI did a 10 second animation in Flash CS5 and exported to a swf file, but my client is asking me a to convert it to a video file with this requirements:
Size: HDTV 720P. (1280 X 720) pixels. 30FPS. (Frames per second)Format: stream format: HDV-HD1. Stream Type: MPEG-2. Transport Stream(TS). Aspect Ratio: 16:9. Britate Type: CBR (Constant Bitrate).
Number of passes: 1. Video Bitrate: 18300
I tried some conversion programs to do the job:
iWisoft Flash SWF to Video ConverterE.M. Magic Swf2AviXilisoft Video Converter Ultimate 6Total Video Converter HD All of them recognizes the swf file fine, ( I set up the fla file with 1280 X 720 pixels and 30 fps) but when I try to export to a video format with the previous specifications using any of the programs, I get a very slow video, not smooth at all, and sometimes a large video with 2+ minutes (supposed to be only 10 sec). The swf file plays fine
I have a Flash-file with some ActionScript code that loads an RSS-feed and animates the content. Now I need to convert that to a video file to use on an external display. Since the RSS-feed updates quite often, this needs to be automated and preferably run on Linux.
So far, I've only found tools to convert FLV to another video format, but that isn't exactly what I need.
Are there any tools available to do this or can it only be done manually through Adobe Flash?
We have a ASP.net 3.5 website with a simple flash video that plays in a banner. What would be the easiest way to update this so that the video would play on an iPad?
View 1 RepliesWhich is the best way to convert a flv video to ogv format?
View 2 RepliesI have a CMS where my client can upload videos, and his clients can log in and view various videos.
I'm having trouble going cross platform with all the browsers and video formats, so I thought it would be easier to convert the video to FLV and post it to the site. I do believe this is possible.
I'm trying to convert it the program to AS3.0 and am having the hardest of time. I managed to convert some pieces of it. But still getting this error.
[Code]...
Is there a way to convert an uploaded video file to an flv file? Either through AS3 or through a pre-built app somewhere? Does AS3 have a function built in for converting videos in any way?
View 1 RepliesClient has supplied a dvd with .bup, .ifo, & .vob files Can I convert them somehow to import the video into Flash??
View 10 RepliesI downloaded some videos from youtube and vimeo , and when I doubble click on the file, its just an empty container, I do have Flash 8 and my friend helped me a bit to play the file by using Flash 8 , but whenever I wanna play the file, I have to have that Flash plyer in the same folder, can some1 be kind and help me a bit to convert my Flee or Flea , whatever is that called to a AVI or any other types of file , which Premiere can load !
View 6 Replies- I can import a single AVI video file and convert it to an FLV video.
Problem: I have two AVI video files... one 4GB (20 minute) long and one 2GB (10 minute) long... and want to combine them to have a single 30 minute long FLV video file.
Question:
- Can I do this in Flash? When I "convert" a single AVI video to a FLV using the File, Import method... I can't really see the video on the Flash time line.
- I tried doing a File, Import for file-1.avi and then doing it for file-2.avi... but the two were on top of each other... and not end to end.
I wanted to know how can you upload a mpeg, avi, or wmw to a website and convert it to a flash video file? What software is involved? What is the easiest method for doing this? Is there a tut out there or a book that details this method?
View 2 RepliesI've got a avi file which I can convert to a swf or flv file. What I want to do though is put this on a website with a play and stop button. Progress bar maybe.
View 2 RepliesI'm building a cms and I want users to be able to upload videos but I'm not familiar with video upload & conversion. Is there an example or has anybody coded a solution like this?
I heard about ffmpeg but I don't know how to integrate it with asp.net.As simple solution I can make my clients upload flv files but then I would still need to get a screenshot from that fvl.
Anyone ever load a video clip into flash dynamicaly, not thru the flash ui, then once it is loaded convert it to an easily browsable movieclip with gotoandplay and such?
View 1 RepliesI use FCE to edit video. I then convert the video to flv for delivery (viewing) via the Internet. I've read lots of discussion on how to create the flv. I've tried various methods, including:
1) Since I have Flash installed on my computer, I've used FCE's Quicktime conversion to export/encode directly to flv, and
2) Export an uncompressed QT movie from FCE; then used Flash Video Encoder to convert the .mov to .flv
What's best practice (I'm open to other procedures too)?
