I want to enable drawing in a certain area. It works quite well and everything besides the fact that I can't stop the drawing function.
ActionScript Code:
import flash.events.Event;
import flash.events.MouseEvent;
var lineo:MovieClip = new MovieClip();
[code]....
Is there actionscript to enable a screenshot of a specific area of the screen? And possibly display this screenshot at a different stage?
View 1 RepliesSince at least cs3, Illustrator, InDesign & Photoshop has all had the Alt + mouse wheel zoom function. I have wondered when this would become available in flash. I just installed my cs5 design premium and immediately noticed that the zooming function has been further improved in the other programs but still nothing has happened in flash.
Am I missing some way to enable this zoom function or is there some third party plugin that can help me? It is annoying and time consuming to have to press z then click around to get the right zoom level and then click whatever tool I was using before instead of just pressing alt and scrolling a bit.
I'm trying to create a drawing application in flash CS4, but I need the viewers to draw in a certain area only, and I want the cursor to change into a brush when I am hovering over that certain area. I tried adding an if statement to check if the cursor is in that certain area, but now it doesn't draw at all.
stop();
var drawIt:Boolean = false;
var startX:Number;
var startY:Number;
[Code]....
How can you make the entire thing for drawing bigger? Not just the white space. Cause I'm making a scroller game..
View 1 RepliesWant to get custom image and which should be dragabble into drawing area...Below is the sample design which exactly i am looking for.
How to get custome image which i have rounded in red mark aslo i t should have input and output ports for ex:For TwoWaySplit.EU.OTHERS it contains IN as inputport and for Outputports:OTHERS and EU.same in the case with TwoWaySplit.US.OTHERS it contains IN as inputport and for Outputports:OTHERS and US and for main component it contains one input port and three output ports as shown in the diagram.Along with that node it should also display those ports and also when we move the node those ports should also move.
I have got it to drag around and such, but i tried to use the drawing API to define the hotspot area but its not working.
Code:
function makeWords(){
yVar = 20
for (i=0; i<25; i++) {
_root.createEmptyMovieClip("symbolName"+i, getNextHighestDepth());
[code]....
I've never used the drawing function on Flash and I followed the fairly simple tute on it just recently. Is there any way to confine the drawing area to a specific shape. Mine's a rectangluar shape that's rotated. You can download my FLA with the background image here > [URL]. I'd like to try and keep it confined to the notepad area. I think it might be a hitTest thing with if/else. My other thing would be to just rotate the notepad so that it's straight. Even still I'd like it confined to the area beginning with the corner of the notepad, not the corner of my movie.
View 2 RepliesI need to know how to script the drawing board as in the user can only draw on a specified area. For example, on a 800x600 layout, only 1/4 of it is the drawing board.After the user has drawn the image, when he/she clicks on a button, the image will be replicated on another area in the same 800x600 space. So far, I can only manage to make a drawing board on the whole 800x600 space and erasing.
View 2 RepliesI have buttons that are just static text: the text color changes on the over and down state, and I have a larger solid rectangular box on the text in the "hit" state.When I roll over the text, the state changes only occur outside the text area where the hit area is defined outside of the text.I tried the advice of going to "control" --> "enable simple buttons" but that just made the text flicker when the mouse is over the button,
p.s. AS3 works fine on the buttons. It's just the hit area that's the problem.
This time round i need to get the pattern drawn on the drawing board to be repeated on another area of the stage.I need it to be repeated 4x4 tile.
View 1 RepliesBy the way i want to make a visualization about a math process to show partial function graph.
I think i can make a scene which in 1000x1000 pixels. I'll start from top of scene and when i press a button i'll move camera to second section which i want to do sketch. I want to make a sketchpad which can draw in a 2 part movieclip. First part is -X section of XY Axis Graph. Second part is +X section of XY Axis Graph. I'll put image of XY Axis Graph to -X and +X section of XY Axis Graph. So it'll be seem like one part. And i'll draw to -X section. After that i'll skip to second sketchpad with camera. And i'll make same thing. But for now i'll draw to +X. And when i press conclusion button camera will skip to bottom of scene and move -X of figure1 and +X of figure2 to bottom. So i can see figure1's -X section and figure2's +X section as merged in bottom. So it'll show to me partial function graph.
But problem is sketchpad is drawing to _root. So i'm unable to move sketch or shapes on XY Axis Graph. But if i can draw that to movie clip i can move it like an object with drawing and merge it like i want.
So i want to make a sketchpad which make drawing in limits of movieclip.
how i can do it ? Also i'm using following code:
Code:
import mx.controls.Loader;
// 1. SETTING THINGS
// ----------------
_root.createEmptyMovieClip("line",1);
[Code]....
i have a drop down menu am working on and each button tab (although they are not button instances !) when clicked opens up the "drop down" section which you can mouse over to choose another specific button etc - if you mouse out of that drop down area then it pulls back up to the original tab state .. what do i change to the code below to decrease the area that you mouse out of to make the drop down area pull back .....at the moment it at least two inches on the screen below and to the right of boundaries of the drop down box before it pulls up - i want to it pull up as the mouse leaves the boundary box .... hope this makes sense .... there is some part of the actionscipt below that controls this but can work out which bit and how to change it !!! (am guessing the x mouse and y mouse bits - but how to change it ???)
[Code]...
I have this function:
public static function cloneDpObj(target:DisplayObject):Bitmap
{
var duplicate:Bitmap;
[code]....
to clone target displayObject (MovieClip or Sprite) and return Bitmap Object.
It can get bitmap from the target object, but it seem don't get all the area of the image.
By give the width and height of target object, but the target object in design was applied by Glow Effect, so my question can we get the all view of bitmapdata from a displayobject?
I have a movie clip named circle_mc(see the image on the link below) and a mask object(movie clip) which determines visible area of the circle. User can change the portion which is visible (extend the red area and make it red+blue, gray area is invisible). I need to find proportion of visible area to invisible area (red+blue/gray) so that I can calculate angle.
View 1 RepliesI would like to first add the xml to my flash. Fine I can do this.But I have a number of buttons, where when I click say CW1, i get the information from the XML file with a node of CW1. I have all the xml set up fine.As I have about eight different postcode types.
ST, CW, CH, TF, WV, WS, DE, SK, SY, and each of these may have numbers that follow, i.e ST1, ST2, ST3 and so forth.
So I can only assume that the postal area could be the main nodes, and the numbers inside the child nodes, am I right thus far.o how can i load the area of the xml file into my text area on mouse click, pulling the information relating.
However I'd need to be able to draw *only* on the board area (a 450 x 350 pixels area) instead on the whole movie... how to "tweak it?" Here's the fla: [URL]
View 8 RepliesI have Particle animation like this this PHP Code:
[Code]...
But i want that Object moving in limited area or masked area. I add masked area like this PHP Code:
[Code]...
But it still not working. Any advice ?? or correction in my script code?
I'm programming a game for my Advanced Higher Computing class, and am doing a whack a mole style game. I am trying to program for the bit where when you click the moving movie clip, then the score is increased by 1.
if(mousedown){
if(movieClip contains mouseXCoOrd){
if(movieClip contains mouseYCoOrd) {
score ++
}
}
}
I just want to do not allow editing at some area of text area in flex. How it can be done?let suppose text length in text area is 50 characters, i want to allow editing if cursor position is less than 15, and if cursor position in text area is greater than 15 it should not allow user to add more text in text area.If user press any key it should not add any character in text area.[code]
View 1 Repliesi've tried to simulate a pencil tool, for drawing above a imagem, but the drawing is below the picture. How fix it?
[Code]....
Basically I've got a reasonably complex drawing object in a fla and I want to reproduce it in a class definition using the drawing api. However obviously this is a tedious task, so is there some trick or automated method of doing this?
Last time I needed to do this it was a drawing of an arrow and I ended up writing down x,y,width,height values for everything but this one has curves in it which I don't have experience with drawing anyway.
I cannot get this to work. Without the "var drawing", "var drawing being true or false" and the "if statement", it works fine. But I need to add the "var drawing" so that you can only draw if you turn it on by pressing the "draw_btn" button. Note, I do not get an error, the script "apparently" contains no errors. Here is the code:
ActionScript Code:
var drawing = false
_root.createEmptyMovieClip("myLine", 0);
[Code].....
I've created a drawing tool which allows the user to draw on the canvas, the problem is that if I try to draw over a movieclip nothing happens. Is there a way I can allow for the user to draw over movieclips? For example if I had a background of paper?
Here's the code I'm using for it:
// This code is for drawing the lines on the page
//1.
var drawingLine:MovieClip = new MovieClip();
addChildAt(drawingLine,0);
[code]....
I need to draw on stage about 40,000 4x4 squares each a different color. The color is determined by an xml file. I have this working in as2 and have converted it to as3 the problem is the amount of time it takes to draw is causing cs4 to time out. I have extended the script time out to 60 seconds. In cs3 as2 it would draw the squares in about 15 seconds. I was hoping as3 cs4 would improve performance but seems to be the opposite. I have tried several methods such as adding children and various drawing variations. the bellow seems to work the best, but is still causing flash to crash.
ActionScript Code:
import flash.display.DisplayObject;
import flash.display.Graphics;
import flash.display.Shape;
[Code]...
I have made a movieclip and gave the frame this actionscript:
------------------------------------------------------------
var keyListener:Object = new Object();
keyListener.onKeyDown = function() {[code]........
it moves fine and stuff but i was wondering how can i restrict the area in which the movieclip can actually move ? my flash file is 550px X 400px and i want to make it so that it can only move in 300px X 200px of the file if you understand ?
OK, this is starting to annoy me pretty intensely. For some reason the esc key shortcuts are not functioning, and nothing I do seems to be able to restore them. Even ticking the 'Esc Key Shortcuts' option in the actions panel dropdown menu has falied to make it possible for me to do as much as type 'esc-s-t' to bring up 'stop()'
View 2 RepliesI want to be able to make a scroll bar that I can scroll using the mouse In essence using the mouse wheel to scroll down the page
View 3 RepliesThis may be a total Noob question but I can't seem to get the Flash Debugger to work. I'm trying to test a flash file that interacts with some PHP script. I'm running MAMP under OS X 10.5.8 I've downloaded the Debugger Version of the Flash 10 plug-in and installed it. Created a the mm.cfg in /Library/Application Support/Macromedia with the following content:
[Code]...
I'm trying out FMS on Windows Vista.I've got it successfully installed.I am trying to get the simple HelloWorld application to work (described at url...Is that the wrong URL?Do I have to enable anything in IIS? To eliminate the possibility of coding error, I've cut and pasted the code directly from files from C:Program FilesAdobeFlash Media Server 3.5 documentation samplesHelloWorld.The "HelloWorld" application shows in the "Applications" tab of the Admin console.
View 6 Replies