ActionScript 3.0 :: Fit A Pre-built Photogallery In A 800x600 Area?
May 27, 2009
I've downloaded a prebuilt gallery .fla (570x350) from this lesson I don't understand where to fix it to adapt on my site.I've copy the fotograms and the AS3 code from the original file and paste on the mine(I've used only 10images), it works, but I don't know where I can fix this problems:1) the gallery is over the menu and I would like to fit in the center2) if I click on the image (randomly) the result is the same, I've the pic over the menu, and I would like to center
View 6 Replies
Similar Posts:
Mar 18, 2011
I am developing a photo gallery using an XML file as the structure. As the document class I have a class called PhotoGallery:-
[Code]...
Once the parsing is finished here I want to call a function back in the PhotoGallery class to start setting up the PhotoGallery. Is this possible, or am I even going about this in the right way? I am not sure I am using classes in the correct
View 4 Replies
Apr 20, 2006
i am trying to resize externally loaded swf`s that are 800x600 to fit in a preview window that is 124x93.. everything works great as long as the external swfs have a MC that fills the stage (i.e that is 800x600)
[Code].....
View 4 Replies
Feb 20, 2010
I bought a flash intro, I dont want it to be an intro, I want to use it as a banner (995x200). I eventually managed to get all the elements right, I published it and preview it, it looked well and what I wanted.The problem is, when I added this new banner to my website and preview it, it still looked well,I got my website ready and published everything but the whole thing just reverted back to what I originally started with (800x600)
View 2 Replies
Dec 2, 2009
I am trying to figure out how to stop a user from resizing the page below 800x600. I have found how to load a new url or swf when below a certain resolution but is it possible to load a frame or movie when the resolution is resized below 800x600 and goes back to the previous frame if resized back above 800x600? I have symbols attached to the corners of the stage. Resizing looks terrible.
View 1 Replies
Oct 21, 2003
At _level0, external movies are loaded through a movieclip using loadMovie("externalmovie.swf","targetmc");
1. Obtain the external movies' resolution/dimension (e.g. 800x600 px) using actionscript.
2. Assume the movies have different dimensions and are smaller than or equal to _level0's dimensions. If they are smaller, you have to scale up the movie until it reaches the largest size possible, to fit into _level0's dimensions. Again, the external movies are loaded using a target mc and not using levels
3. Note: Remember that when movies are loaded through target MC, they inherit the properties of that mc, so if the size of the mc is 600x600, the external movie would be so too, even if it were 800x600px . This means that you may not do a direct [AS]MC._xscale = 200;[/AS] to it.
* The _level0 movie will serve as a master swf where the different external movies will load into, and consecutively play (one at a time), automatically (ergo, without having to manually open and quit and open and quit the movies).
View 8 Replies
Mar 11, 2009
My original movie is 800x600 and my external swf is 700x525... I'm using the following script on a keyframe... loadMovieNum("123.swf", 1); ... and under normal circumstances this would work fine... however... I need the 700x525 external swf to retain its size in the center of the 800x600 original movie... right now it's edge to edge and showing what's going on 'offstage' in the external swf! What scripting am I missing? I'm using Flash 8 on a Mac.
View 2 Replies
Jul 28, 2009
i have a drop down menu am working on and each button tab (although they are not button instances !) when clicked opens up the "drop down" section which you can mouse over to choose another specific button etc - if you mouse out of that drop down area then it pulls back up to the original tab state .. what do i change to the code below to decrease the area that you mouse out of to make the drop down area pull back .....at the moment it at least two inches on the screen below and to the right of boundaries of the drop down box before it pulls up - i want to it pull up as the mouse leaves the boundary box .... hope this makes sense .... there is some part of the actionscipt below that controls this but can work out which bit and how to change it !!! (am guessing the x mouse and y mouse bits - but how to change it ???)
[Code]...
View 1 Replies
Aug 5, 2011
I have this function:
public static function cloneDpObj(target:DisplayObject):Bitmap
{
var duplicate:Bitmap;
[code]....
to clone target displayObject (MovieClip or Sprite) and return Bitmap Object.
It can get bitmap from the target object, but it seem don't get all the area of the image.
By give the width and height of target object, but the target object in design was applied by Glow Effect, so my question can we get the all view of bitmapdata from a displayobject?
View 4 Replies
Sep 29, 2011
I have a movie clip named circle_mc(see the image on the link below) and a mask object(movie clip) which determines visible area of the circle. User can change the portion which is visible (extend the red area and make it red+blue, gray area is invisible). I need to find proportion of visible area to invisible area (red+blue/gray) so that I can calculate angle.
View 1 Replies
May 21, 2004
I would like to first add the xml to my flash. Fine I can do this.But I have a number of buttons, where when I click say CW1, i get the information from the XML file with a node of CW1. I have all the xml set up fine.As I have about eight different postcode types.
ST, CW, CH, TF, WV, WS, DE, SK, SY, and each of these may have numbers that follow, i.e ST1, ST2, ST3 and so forth.
So I can only assume that the postal area could be the main nodes, and the numbers inside the child nodes, am I right thus far.o how can i load the area of the xml file into my text area on mouse click, pulling the information relating.
View 11 Replies
May 30, 2004
However I'd need to be able to draw *only* on the board area (a 450 x 350 pixels area) instead on the whole movie... how to "tweak it?" Here's the fla: [URL]
View 8 Replies
Jun 15, 2011
I have Particle animation like this this PHP Code:
[Code]...
But i want that Object moving in limited area or masked area. I add masked area like this PHP Code:
[Code]...
But it still not working. Any advice ?? or correction in my script code?
View 1 Replies
Nov 29, 2009
I'm programming a game for my Advanced Higher Computing class, and am doing a whack a mole style game. I am trying to program for the bit where when you click the moving movie clip, then the score is increased by 1.
if(mousedown){
if(movieClip contains mouseXCoOrd){
if(movieClip contains mouseYCoOrd) {
score ++
}
}
}
View 3 Replies
Nov 10, 2011
I just want to do not allow editing at some area of text area in flex. How it can be done?let suppose text length in text area is 50 characters, i want to allow editing if cursor position is less than 15, and if cursor position in text area is greater than 15 it should not allow user to add more text in text area.If user press any key it should not add any character in text area.[code]
View 1 Replies
Mar 15, 2007
I am trying to get the scrolling photogallery to have a url that when they click on a big picture it will take them to another page. So far, I can create the link but when I click on it ALL the urls come up.On the link movie clip, I've assigned:
(symbol on layer in Scene 1)
onClipEvent (enterFrame) {
this.onRelease = function() {
getURL(this._parent.link, "_self");
[code]....
View 5 Replies
Mar 24, 2006
I'm building a photo gallery with XML and Flash. But want the XML data file to include HTML tags. Like <br> or <font> tags
current XML data (partial)
<gallery>
<image title="KYOTO was the title of Roland's photo exhibition at the Gallery of the
[code].....
View 7 Replies
May 16, 2007
I stumbled across a website one time that had source files for AS tweening. I can't remember what it was and, of course, i can't find it again.
Anywho, I want to use an AS photo gallery on my portfolio...perfect example is on a-nt.com (anthony ludlow's portfolio).
View 1 Replies
Feb 6, 2009
add a stop button to the first photogallery?
View 1 Replies
May 10, 2010
Can u give me some free download ref of 3D photoGallery.
View 1 Replies
Apr 20, 2011
stop();btn1.addEventListener(MouseEvent.CLICK,play1);function play1(event:MouseEvent):void{gotoAndStop ("fl1")}btn2.addEventListener(MouseEvent.CLICK,play2);function[code]...
This is the code I've got from net 2 create photogallery in flash using ActionScript3.0. but I don't have that version on my pc. I've macromedia flash 8.So,I've used the same code in macromedia flash8.but it has given me errors like mouseevnt can't be loaded.
View 3 Replies
Dec 14, 2009
I am new in as3, I am trying to build a photo gallery , can anyone tell me what it the best approach to make a photo gallery with three different categories let say:
1-cats
2-dogs
3-human
should I do it with different frame lables for each ? should I do it with different external swf file for each? or should I make different movieclips and keep them in the library and then call them?
I am teaching my slef and I am pretty confused, by the way I just realized that controlling external swf files is kinda hard you can't easily tell them gotoandplay , I ma struggling with it for 3 days, but yet I am not sure it's the best way?
View 0 Replies
Feb 11, 2010
Not sure how it works, but the kind of gallery I'm looking to put together is similar to the one found in the portfolio on this site:Im not sure but I understand that while the thumbnail loads it's also loading its cooresponding image into the gallery as well. Just curious how they are creating that loader, where you see the picture while it's loading.
View 0 Replies
Dec 26, 2005
The trouble is that when I click in the button in the first film, the "main.swf", the "album.swf" is loaded into level 10, but the images and description does not load. Seems to be here some parsing problem between flash and xml, but I can't solve it.
View 8 Replies
Jun 23, 2006
How would I go about creating a timer for my photogallery?
I want to have a line that grows from 1px to 600px width in excactly 6 seconds, and when it reaches 600px - skip to the next image.
View 1 Replies
Jun 20, 2007
how I dynamically resize the images that are loaded into Flash. I want to resize the window in which they are displayed, so a 400x400px photo will display at 150x150px, for example. If you want tobut don't feel like checking out the tutorial,me know and I will fish out whatever code I think this solution would concern.
View 6 Replies
Nov 19, 2007
i have a MC that load another MCwith an XML photogallery and i was wondering how could i control externally this gallery.Basically if i want different button of the MC to control the MC with the xml photogallery , example i want button 3 to load the xternal gallery.swf and to load image 2 from the xml...i know is confusing and i am not even sure if it can be done.
View 14 Replies
Feb 28, 2008
How can I edit the script here to resize the image's height and width if it is bigger than the stage's height and width? I tried to do so my self, but it wouldn't work.
View 2 Replies
Mar 11, 2008
Wondering how simple it would be to specify a background color in the xml file for each image.That way you could have the background of the movie to fade from one color to the next to match the image displayed.Probably like ...
Code:
<pic>
<image>http://www.kirupa.com/developer/mx2004/pg/kresge.jpg</image>
<caption>Kresge</caption>[code]....
View 1 Replies
Sep 1, 2003
Trying to get my head around all of the variables, functions, etc. Anyway, I want to modify the Kirupa photo gallery AS <http:[url].... to have my movie go to another movie or scene after the images have been viewed one time instead of playing through the array over and over. Printing out the AS and going through my references I am getting an understanding of what things are doing.
View 8 Replies
