how to update flash player 11 playerglobal.swc to use new classes? i created FP11 folder and put playergolabl.swc into it. and made new Flashplayer11.xml file but i cannot see new classes such as JSON.
View 1 Replieshow we can update the Flash IDE player, or the player used when testing a movie (sometimes called the Test Movie player)?In the case of CS3, when you download the latest sets of players and replace the "Players" folder, you'll still test the movie in version 9,0,115,0 As you might know, this player version has a bug: When loading an AS2 movie that has a MovieClipLoader into an AS3 movie, the AS2 movie's eventListeners for the MovieClipLoader fail.
View 2 RepliesSo Flash CS5 came with a beta version of Flash Player 10.1.Now that the official release of Flash Player 10.1 is released, how do I update what Flash CS5 uses when I Test Movie?I have so far updated the Flash Player in my browser and my standalone players but I can't seem to figure out how to update the Player that Flash CS5 uses.This wouldn't be so bad if the beta of 10.1 wasn't breaking my project because of bugs.
View 2 RepliesI am using linux and can not find out how to update my flash player. Everywhere I go says to find such and such file and remove it or something but I do not know linux very well.
View 3 RepliesI have made a swf file that requires Flash Player 10.1 to play back properly. I have successfully updated to Flash Player 10.1 in my browsers, and if I open this swf file in a browser it functions correctly.
However, I want to be able to play it back in the standalone Flash Player that came with Flash CS4 Professional, and it was not updated from 10.0 to 10.1 when I updated to 10.1 for my browsers. How can I update this software to a newer version?
how to go about getting the Flash Player(s) that's built into the CS5 IDE updated? According to System.capabilities.version, it's running v10.1.52.14 which, according to this page on the Adobe site, says was a pre-release version of Flash Player and should not be used! It also seems to have an annoying bug where HTML tags are frequently shown as raw HTML, rather than being rendered, which makes testing stuff in the IDE a real pain.
View 12 RepliesI would like to find out if there is a way for a message to pop up on my website if the user has Flash Player version lower than 10.1. If the version 10.1 or higher (in the future) no message should come up. The message should prompt a user to update to the Flash Player version 10.1. My entire site is in Flash and I am using AS3. So I am guessing I should implement an AS3 code on the first frame of the script layer. Does anyone know what would be this code?
View 9 RepliesI know there currently some ways to install the sdk for Air 3 and flash player 11. But when will there be an update the installs these key elements in a professional an clean way? Is the an offical date for when an flash cs5.5 update will install the new sdks?
View 1 RepliesI've been using CS4 to create flash 10 applications. It works well in other browsers, but IE 6 will not tell the users that they need to update their Flash Player. Instead, it will play the flash as if it's a video (keep looping from frame 1 to end) without allowing any interaction..
View 1 Replies[Code]...
If trace statement says: Your Flash Player version is older than the current version 9, please update. How to start auto update of Flash Player using Actionscript?
I was able to gather info on how to test and display users OS and FP version. However this info is "dormant" it is just being displayed on the screen.Does anyone know how to make an alert message to upgrade to the current Flash Player if a user runs the lower version?
View 1 RepliesI'm having some trouble with the code below. the flash player has a default volume slider, but I want to use the jQuery slider to change the volume. the volume value(nr) is changing while I move the slider, but the volume of the song doesn't.
<!DOCTYPE html>
<script type='text/javascript'>
$(document).ready(function(){
[Code].....
The flash player has a little window that can be opened (similar to flash->settings) telling the user to update the player if the movie loaded is for a more recent version. How can you instruct the player to do this? ITV have managed it with their catchup-tv player.
Context: I am allowing users to copy flash into their PowerPoint presentations and would like to tell them to update their flash player if necessary. I am not embedding a web page in the power point so no JS can be run for checking etc (because I know this is not necessary).
I am trying to create my first semi-serious flash game. The problem I am having is I want to be able to click a button in the players inventory to equip a different armor to the player, and have that armor work in the game on the same movieclip(Player) without having to re-make all the attacks and moves etc. for each change on another movieclip. My ideas are extremely novice like putting each armor and update on a different frame inside the Player movieclip and then doing a gotoAndStop to the frame. Though that may work I don't know how to goto a frame inside a movieclip. I would like to control this using as much code as possible.I would paste my code but I don't have any code for this part of the game so far. I have tried some simple coding but so far I cannot get the pieces together.
View 1 RepliesI am trying to update the player bar as the mp3 plays.The bar should represent the length of the song and update to show how much of the song has played so far.
View 1 RepliesI am deploying Updates via SCUP and SCCM to hundreds of Computers. Fortunately Adobe provides an SCCM Update Catalog for both Adobe Flash ActiveX and Adobe Flash Plugin. But now my Problem: After publishing the Update via SCCM, the client is not supposed to be interfered with the Update Progress (which is working) I figured the Updater works like this: First SCCM checks if a Update needs to be deployed, if this is the case, The Flash Updater begins. First the old Flash Version is beeing uninstalled. But now: if the Client has a Browser Window (IE, or Firefox) open, the Updater is not able to install the new Flash Version and quits with an Error. This leaves the Client PC without any Flash (because its being uninstalled before) How can I prevent Flash being uninstalled due to the Update progress not working while a Browser window is open?
View 1 RepliesI've got a movieclip, which has got a dynamic text element.The movieclip uses a package for its codeThe package if obviously derived from the MovieClip classI've got a timer, that updates the dynamic text field every second.When debugging the code, I see that the timer works well. Its updates the value of the dynamic text field.
View 2 RepliesMy loader component works when I publish to Flash Player 7 but not when I publish to Flash Player 8, why? The publish setting are for ActionScript 2.0 on both.
View 2 RepliesI am trying to create a flash player to display images in sequence using Flash player & ActionScript. The code below has lots of errors and I can't work them out. I have programmed in other languages and am perfectly aware that something like this.
*code*var imageLoader:Loader;imageLoader = new Loader(); // 1120: Access to undefined property imageLoader*/code*
OR*code*var imageLoader:Loader = new Loader(); // 1046: Type was not found or was not a compile-time: Loder*/code*
[Code]...
I have a swc plugin embedded in my product to stream live video to a group of recipients.The plugin uses the NetStream, NetGroup and NetConnection objects, the server I use to handle the RTMFP session is Influxis.One client creates a group as a publisher, and stream a live video.His Camera is enabled and I can see the video on the screen as well. The others connect to his group and play the video.Peer assisted Networking is enabled for both the publisher and the recipients.The plugin worked well in all 10.x versions (10.1/10.2/10.3)However, when upgrading to flash player 11.x, it stopped working.
-11.x to 11.x isn't working.
-10.x with 11.x isn't working.
-only 10.x to 10.x is working.
The server I use to handle the RTMFP protocol is Influxis.com I sent them the same question as well.The weirdest fact is that I'm using flash builder 4.6 with 4.6 sdk, which is aimed for flash player 11.1, and it is only working with 10.x flash players.
I'm having a performance problem that seem to be related to Flash Player 11.I noticed this mainly because Chrome auto-updates the flash player. So, it's now up to 11 in Chrome. During a sliding section transition, the flash player chokes and skips about 10-20 frames. In essence the content jumps, not a smooth transitions. You can see this at the following url. Using a browser with 10, plays as intended, a separate browser with 11, chokes and jumps ahead.
firstworldproblems-[url].....I have security sensitive site, that is more elaborate that I can't share here. But, the same issue is happening above.I'm using LoaderMax to load assets. Adding it to the stage and then animating them in from the left or right of the stage, using Tweenmax. The one I can't show is a series of images, 1280x640 pixels, 10 in total.Removing items from the stage when they are not visible, so I can get the CPU usage back. On Flash Player 10, this is working as intended.On 11 it jumps. I don't think it's the removing assets from the stage that's choking the player, because the above link has the same issue.I feel like this is a Flash Player 11 performance issue.
I'm pretty new to Action script and I have a problem here that I can't seem to figure out.
I have this Action Script Code which is attached to a simple movieclip, and it all works IF the general settings are set for Flash Player 6.
It does not work for Flash Player 7 or above, which is probably because this is Actions Script 1 Code...
I attached the .fla file and also here's the code:
[Code]...
In some cases, such as what my client wants - Flash 6 and Flash 7 players behave slightly differently... a very annoying thing at times.Now, what I need to be able to do is to detect what version of Flash Player the user has. This will be done while my flash application is playing and then run the appropriate part of the function I am writing.Any way to detect what version of Flash Player is running from within the Flash Player?
View 3 RepliesI have two mp4 video files on webserver, i wanted to play them in flash player(flv player) on my asp.net page, but i couldn't be able to play them, i also tried to play them in quick time player the same prob occured. but i waz giving the accurate path, there were no spaces in mp4 file names etc. Does it need to have mp4 player(or codec etc) installed on webserver?
I have also some wmv files on that server , and i am playing perfectly using silver light player, and media player object on my website.
I am trying to make the SIMPLEST POSSIBLE MP# player using the player component preinstalled in flash.It is very simple, the code is as follows:
Code:
on (release) {
player.contentPath ="Song.mp3"
player.play()
}
("player" is the mp3 component)
This works if I want a single track to be selected and played.Now, I need it to AUTOMATICALLY LOAD THE NEXT TRACK, which I will input in the code.I am thinking something like this:
Code:
player.onSoundComplete = function() {
player.contentPath ="Song.mp3"
player.play()
};
But this is not working.
PS: I know an XML file would be the best here, but I don't want to use it. I just want to enter the next track's code inside the swf.
I have a slight problem when publishing to Flash Player 7 but works perfectly in Flash Player 6, below is the code:[code]In short this creates a list where the values are kept in SharedObject.I need to use a WebService so I require Flash Player 7, as I said this works as expected in Flash Player 6, so maybe someone may know a pitfall or two when migrating code form 6 to 7?
View 1 RepliesI am trying to put together a simple game and have been doing really well until I decided I am going to have to create a new class to handle enemies.What I have so far is a player walking around on random terrains and I am up to the point where I have placed x amount of enemies on stage at appropriate times. I have written their class which will hopefully eventually handle their behavior and it outputs simple trace("BOO!").
Where I face the problem is that I obviously would like to make these enemies follow the player to attack. But when I try to access the .x or .y attributes of the player, it throws an error: 'call to a possibly undefined property with static type Class'?I have tried accessing the .x using the following ways (where badger is my player instance and Main is my class definition within the properties of the FLA):
Main.badger.x
Main(root).badger.x
Stage.badger.x
I have also tried to access other vars and still nope..My class code is this:
Code:
package
{
import flash.display.MovieClip
import flash.display.Stage
[code]....
I can't update flash player on my mac os x 10.4. As a result, I can't watch youtube videos because youtube is using the new flash plugin.
View 5 RepliesFlash Player 11 project doesn't run in standalone player, is it posible to do this?
View 1 RepliesI can only find how to download the actual PLAYER for 10.1, but which library is used in conjunction with it?Will the latest release of the Flex SDK have the libraries for the multi-touch events etc?Or is the SDK for 10.1 only available to people who work for Adobe? will porting to iPhone supported formats only be available in Flash Professional, or will SDK users also have that option?
View 3 Replies