i'm trying to create a dynamically named Vector. i have a critical project deadline tomorrow, and this small problem is holding back continued development i've adapted my code from this example [URL]...yet am getting an error message (see below). here is what i have:
[Code]...
I don't know if i'm in the right category here.I have a line in the center of the screen, and i want it to bend. i guess i have to use vector operations? (I mean, what Illustrator uses. visuals, with vectors instead of pixels). I want to be able to set points, so that the line bends towards that point. And the color under the line should be different than the color above the line. Does anyone know how to get started on something like this?
View 1 RepliesHow can i call and instantiate soundclips in my library dynamically.[code]
View 1 RepliesI made a Post-It note movie clip that is draggable. I want to create a whole pad of notes, or at least simulate this. I thought the best way to do this would be to add another Post-It whenever the startDrag() is triggered.
I first tried creating the Post-It with symbols but didn't think I could dynamically create new ones this way. I then created a class and added it to the stage[code]...
Trying to get from AS2 to AS3 and the simpliest things are taking too long.I have some movieclips on the main timeline named...
btnSm1_mc
btnSm2_mc
btnSm3_mc
[code].....
Using org.as3commons.reflect I can look-up the class name, and instantiate a class at runtime.I also have (non-working) code which invokes a method. However, I really want to set a property value. I'm not sure if properties are realized as methods internally in Flex.I have a Metadata class which stores 3 pieces of information: name, value, and type (all are strings).I want to be able to loop through an Array of Metadata objects and set the corresponding properties on the instantiated class.[code]I realize that I have to declare a dummy variable of the type I was to instantiate, or use the -inculde compiler directive. An unfortunate drawback of Flex.Also, right now there's code to account for typecasting the value to it's specified type.
View 1 RepliesFor a game I'm attempting to develop, I am writing a resource pool class in order to recycle objects without calling the "new" operator. I would like to be able to specify the size of the pool, and I would like it to be strongly typed.
Because of these considerations, I think that a Vector would be my best choice. However, as Vector is a final class, I can't extend it. So, I figured I'd use composition instead of inheritance, in this case.
The problem I'm seeing is this - I want to instantiate the class with two arguments: size and class type, and I'm not sure how to pass a type as an argument.
Here's what I tried:
public final class ObjPool
{
private var objects:Vector.<*>;
public function ObjPool(poolsize:uint, type:Class)
[Code].....
I'm building a variable matching game. The player clicks one of four choices and then clicks the answer area. Their choice appears in the area, and if the answer is correct the answer container shifts down, highlighting the next answer area to be filled. Inside the container are a large number of these answer areas (60).
What I am trying to do is have only one be answerable at a time, the highlighted one, so that players can't skip ahead despite seeing the empty spaces left to answer in. What I have right now isn't working, and I could use some outside insight.
Code:
var i:int =1;
function sampleFunction(evt:MouseEvent):void{
if(selection == e.currentTarget.targetCorrect){//targetCorrect is a string set statically
[Code].....
I realize I could use a for loop to add the event listener, but the project really calls for only one answerable area at a time.
My problem is that I cant figure out how to draw my movieclip if I dynamicly name it.
However If I address it by using its actual name it works fine.
I have included both working and non-working code.[code]....
I have an array of external images that I am loading and the number of external images is variable, so I want to be able to create loaders to load them as needed. Is there a way to dynamically create and uniquely name a loader at run time?
Otherwise is there a way to pass the image content off in such a way that it will remain loaded if the loader is used to load other images?
I'm trying to create a dynamicly named object.
something like
private var myVar:String = "dynamicName";
private var [myVar+"staticName"]:Object = new Object;
but what i wrote above dosn't work for some reason.
I've dynamically created a grid of buttons which are going to modify a 2D array, but I can't work out how to create a unique function for each iteration of the loop with a dynamic function name. Probably just a stupid syntax error by me...
ActionScript Code:
for(var i:int = 0; i < 8; i++){
for(var j:int = 0; j <
[code].....
So I've been trying to make dynamically named functions, and while it works, I've run into a couple of problems.
ActionScript Code:
var uServer:String = "irc.epic-chat.net"
var lol:String = "lolz"
var num:Number = 3
[Code].....
If I had something like that ^ what could I add to func to distinguish between whether it is being called by lolz0, lolz1, or lolz2? I was thinking whether there was something like .name I could use, but I couldn't come up with anything.
I'm trying to get data out of an array. Problem is the array I'm trying to access is different depending on where I'm currently at.
I can get data from a dynamically named variable, like so:
_parent["Menu" + Menui + "Button" + Listi + "Link"]
but now that I want to access one field in an array, instead of a single variable, I don't know the syntax to get at it? Waa. I tried:
_parent["Menu" + Menui + "Button" + Listi + "Link[" + Linki + "]"]
but it didn't like me.
i am loading several images from an XML path into a flash movie and i want to dynamically create image loader variables for them. Here is my code so far:
Code:
var xmlData:XMLList;
var myXML:XML;
var xmlLoader:URLLoader = new URLLoader();
[Code]....
method and this doesn't work for me either, i'm guessing thats because it is in the AS2 forum.
I've been attempting to attach bitmaps from the library in AS3, and have settled on a piece of code which works:
PHP Code:
var myBitmap:Bitmap = new Bitmap(new pic1(0,0));
myMovieClip.addChild(myBitmap);
[code]......
I have a movieclip (myMC) that I create several instances of.I dont duplicate the movieclips, but just copy and rename them like "myMC_i", where "i" is a unique number.Can I somehow check if one copy of myMC (for instance "myMC_2") collides with another copy (for instance "myMC_5"), always ignoring collisions with other types of movieclips on the stage?Thats the problem I cant solve. I can either check for a collision with ANY other movieclip, or check for a collision with a single SPECIFIED movieclip (by checking for its name). But I dont know how to check for a collision with a group of movieclips that has the first part of their names in common. If it had been like in a search-engine, you would have been able to search for:[code]
View 1 RepliesI have a function that creates a group of dynamically created MC'sWithin each MC, there is a group of dynamically created buttons.I got that bit to work fine.Now what I need is to send a handful of var strings and numbers along with each of those buttons, and am not having very good luck doing thatHere's what I got so far...
Code:
function storePageBuilder(a):void{
var storeMC:MovieClip = new store_MC();
[code].......
I have a function that creates a group of dynamically created MC's Within each MC, there is a group of dynamically created buttons. I got that bit to work fine. Now what I need is to send a handful of var strings and numbers along with each of those buttons, and am not having very good luck doing that.
Here's what I got so far...
Code:
function storePageBuilder(a):void{
var storeMC:MovieClip = new store_MC();
storeMC.name = "storeMC_"+a;
[Code]....
here is my new code that works for PART of my movie. i have two dynamic text boxes, one named "item" and one named "ssnumber" ssnumberNode works fine but itemNode does not. i bolded the parts that i think are relevant to the problems
[Code]...
So I have recently created a Tshirt design application where a user can draw on a tshirt / add text / upload images. Though I am having a few problems. Problem #1: Using the pen tool I can only allow users to draw and reset the drawing using the graphics class, no idea how to create an eraser tool
Q1 - Is there any way to create the eraser? Problem #2: Once a user saves the shirt it is later encoded into a JPG or PNG With no way of editing the shirt in the future.
Q2 - I thought of saving the locations of the shapes / items they uploaded onto the shirt and colors and later re-creating the shirt once loaded. But ran into one problem that is I cannot save the drawing they did using the pen tool, only the location of the objects (MC's) is there any better way to creating this?
I have two vector graphics I imported to my stage and want to do a shape tween between them. But shape tween is grayed out. The images are imported Illustrator EPS's. I attached two screenshots.
Attachments: Picture 1.jpg (144.1 K)
Picture 2.jpg (141.9 K)
I very often use animated text (rather for menu titles than paragraphs) in my flash works and the render of fonts is usually quite irregular. What I now do is convert the alphabet + figures of the font I am using to vectors (Ctrl + B) on the scene and then make movieclips with each letter, which I store in the library ready for AS to call them. The rendering quality is comparably better. The truth is I've never had to make more than, say 50 clips "by hand", but it would still make my life easier and save me dull time/work if there was a way with AS to transform a text field to vectors...
View 5 RepliesHow would you define/create generative typography ? I thought also of some sort of "intelligent" adaption. For example a font that uses serifs in certain condition or not... Are there some findings in how you could access the vectors of a font in actionscript ?
View 2 RepliesIs there a way to use getters and setters for Vectors?Say, in my Main class, I would like to write
myVector.push(item);
and in another class, I have written:
public function get myVector():Vector.<int> {
return _opponentCardList;
}
public function set myVector(myVector:Vector.<int>):void {
_myVector = myVector;
}
This doesn't really work as you have to set _myVector to a Vector. But what if you just want to push(), pop() or splice?
I'm currently developing a Flash website that incorporates an flv player. The controls on the player's skin are all vectors. I've set it up so that when you hit fullscreen on the player controls a fullScreenSourceRect is created which is working great. However when the the player is full screen, the once crisp vectors are now pixelated as if they were a bitmap.
View 3 RepliesIs there any way to modify the vectors of a DisplayObject at runtime? I import a Sprite or MovieClip on my application, and I want to be able to modify the vectors that composes it. A close approach is to use Graphic class, but it always renders below the Sprite, it can't clear the original graphic, and it can't modify the vectors, only draw new things. And if this is totally impossible, I would like to know how I can call Sprite.graphics.drawXXX, so that the graphics are rendered above the Sprite.
View 1 RepliesI'm working on a project which draws circles continuously at framerate and animates them around the stage and I'm running into performance issues.
I'm already converting all objects to bitmapData as soon as they become static. My question is, will converting the circles to bitmapData as soon as they are drawn increase performance? In other words, is animating say, 200 bitmaps (with transparency) faster than 200 vector circles?
Are there any drawbacks to this technique? (I'm thinking opacity problems maybe?)
If they were more complex shapes than circles would the answer be different?
I'm trying to serialize data in AS3 but am running into a frustrating problem. Originally I had problems with "myObjClass" not being convertible, but after I discovered "registerClassAlias" I got things working allright. Some time later, I added vectors to the myObjClass. I ran into trouble with Vector Strings before, as was reported here:
[Code]...
I'm trying to scale down some vectors but when i do they become pixelated. So I tried putting then in a container and scaling down the container, but pixelation still occurs.can anyone tell me why this is happening and a possible work around?Here is the function from my class:
private function addItems():void
{
addChild(itemsContainer);
[code].......