I've downloaded the swf-file and the fla-file and there's three as-files used in those files. The file (fla) show that it use an external class (one of the as-files) and I think the problem is this class also affect the main-movie.
I may be wrong, but if I'm not.. how do I go around this?
I'm currently used to have the as written inside the swf/fla-files and sometimes including them, but not as a class.
I'm using loadMovie("folder/file.swf", "_root.host"); to load the first swf file into a blank movieclip named 'host'.When I try using the same code it loads the other swf file, it just closes the first one.I want to have it as more of a popup that can be closed without affecting the original swf file
I have a MovieClip which is just a progress bar animation with about 100 frames. Then I load a zip file using a URLStreamLoader and subscribe to the ProgressEvent.PROGRESS event. After loading starts I receive notifications correctly and I set the bar's corresponding frame using gotoAndStop(). Everything seems to work fine except for the animation not being visually updated.
It seems that the scene won't refresh until the zip file is fully loaded.
#1) I am having a movieclip to load a data... The thing is is it possible to load that data through its bites instead of a movieclip?
#2) I am having n number of swf files... And i am loading each and every sfwf by the url (i.e) 1.swf, 2.swf etc.. My question is it possible to load the swf by there bites instead of the url like(1.swf) ? If it can be done then please show me a direction.
I am working on a website, its a project, I built custom buttons and used there own AS3 to make them play on hover. There is one problem thou, in my main scene or timeline I created this function:
about_but.addEventListener(MouseEvent.CLICK, function(){ var aboutURL:URLRequest = new URLRequest("about.swf"); }) contact_but.addEventListener(MouseEvent.CLICK, function(){ var contactURL:URLRequest = new URLRequest("contact.swf"); }) cat_but.addEventListener(MouseEvent.CLICK, function(){ var galleryURL:URLRequest = new URLRequest("catalogue.swf"); }) port_but.addEventListener(MouseEvent.CLICK, function(){ var portURL:URLRequest = new URLRequest("port.swf"); })
Ok but it had the navigatetoURL function but I took it out. Reason is because I want these buttons to load in a movieclip (mc_loader) as external swf files. I am not sure as is to linking these buttons to the loader movieclip.
how to load photos from a XML file into flash. I have a movieclip (called PhotoMC) that has two layers, bottom layer is a square(is a graphic). Top layer is a blank MovieClip where I would like to place the image loaded from XML. I'm trying to have the movie clip(PhotoMC) load for each jpg in my xml. So basically a movieClip will be attached to the jpeg.
I am loading an external swf file/movieclip onto the main stage - it is a simple transition and once it has finished playing, I want to jump to a frame in the main stage.I've loaded the movieclip onto the stage, but don't know how to jump to another frame after it has played and stopped...what's needs to be added to this to goto a frame on the main stage........
I am trying to import a SWF file into a custom loader and then treat the loaded SWF file as a MovieClip object. The code for the functionality can be seen below.
public function loadMyMovie(movie:String) { var now:Date = new Date(); var rnd:String = "?randomize=" + now.time;
[Code].....
When I do this I get the following error.
"Implicit coercion of a value with static type flash.display:DisplayObject to a possibly unrelated type flash.display:MovieClip."
I'm trying to load a SWF movie into a target movieclip called blankmc. The SWF movie is loaded from an absolute URL (eg. [URL]/img/20042005113934movie3.swf ) My Loading Progress code fails to detect the SWF file size. However the same code works perfectly for a JPG! Essentially the .getBytesLoaded() and .getBytesTotal fail to work. Why is this and how can I get it to work for loading SWFs?
How would you defer loading of other graphics on the page until after the images in a Flash gallery's images.xml file are finished loading?Is there any way to detect for this, or would I only be able to check if the flash swf object is finished loading? I'm pretty sure the swf object would be loaded/ready as with document.getElementById('flashobject').onload = function(){}; before the corresponding images have loaded though, instead of after.
Im making a movie with a menu that loads movie clips according to which menu is selected simple enough. However, the newly loaded movie clip also needs to allow the user to load another movie into the main movie effectively swapping the first movie clip with the second. This needs to be done without using the main menu.
I have a "loader.swf" after which my "main.swf" loades. I have used a loaderPro v3 (AS2) component. Doing that was easy but then when it starts loading, even before the loading completes the main.swf starts playing in the background. And i have no coding in my actions panel.
Got a really big problem here. I keep on getting "NetConnection.Connect.Failed" when I load a .asc file on my main.asc file, i use the method load() in my code. I really don't understand why this happens, but when i comment out the code that loads the asc file, I can successfully connect to fms. I can't figure out what's happening here. Btw, i'm using fms4 in windows 7 32bit.
what I'm trying to do is make a preloader that will preload about 20 external SWF files before it lets you get to my main file. I want to do this because my main file needs the SWFs to be ready to go once its done loading. I have looked around and i found a few ways to do this with the "if (loadedBytes>=totalBytes)" and the code loops back till the files are done loading... this would be just what i need but i cant seem to get it to work. the file just seems to start loading my files but does not loop and just runs the time-line even once i state what frames i want it to loop.
i am having a main.swf which has a movieclip in the form of a window. it's instance name is window_mc. this window has an empty movieclip called load_mc and i am trying to load another swf called login.swf into window_mc.load_mc using
window_mc.load_mc.loadMovie("login.swf");
both main and login swfs are having resolution 1000x780.. but wen it is loaded as said above, the texts inside the loaded swf looks very large. the resolution looks as if they are different.. i haven't tried loading movieclips much. but wen i load a swf into an empty movieclip, it wrks perfectly fine...
I have a flash file that is 1.5mb in size. As it takes about 6 minutes for someone on dialup to load this file, I have created a smaller swf file and loaded the larger one from it but I don't want the larger one to begin to play until it's fully downloaded. How do I set this up? I have set up the action script 2 as follows: loadMovieNum("top2.swf", 0);
Is there a way to extract a single file from a zip file in Adobe AIR?
I'm using NoChumps zip library to extract files from a zip. In this library the entire IDataStream is loaded into memory and after that you can extract file entries easily. In cases where the zip is 5 to 10MB there are no problems. But when the zip is 80MB, which many are, 80MB is loaded into memory. This causes the app to crash and run slow on mobile devices. According to the zip specification,
"A ZIP file is identified by the presence of a central directory located at the end of the file, this allows appending of new files. The directory stores a list of the names of the entries (files or directories) stored in the ZIP file, along with other metadata about the entry, and an offset into the ZIP file, pointing to the actual entry data."
Also, I do not have control of the size of zip files but most average is 60 to 100MB. Files inside are ~4MB.
I have a "loader.swf" after which my "main.swf" loades. I have used a loaderPro v3 (AS2) component. Doing that was easy but then when it starts loading, even before the loading completes the main.swf starts playing in the background. And i have no coding in my actions panel.
Is there a way to check file name case when loading a file? For example:
My URLRequest has this: "filename1.swf", but the actual file on the server is this FILENAME1.swf. Since the file names do not match case, is there a way i can have flash and AS3 catch this?
I have a problem loading remote XML file into SWF file. Im doing a banner for a client with adds that is supose to load constantly updated XML file from my clients server and load some images into flash form it. Everything works fine when i test the movie (CTRL+ENTER), but when i publish it and test it from explorer, XML file is just not loading into flash.
I have problem in loading multiple swf file into a main swf file. I will state the things clearly at first. I have a main Index file to which i have to load some swf files which i have placed in a seprate folder. I tried to load those movies to main swf file using loadMovie it worked well when i give the exact path of the swf movies in subfolders. Aslo it worked when i placed the entire swf files including the Index file on a single folder, this worked only on my local machine suppose if i copy those entire folder to some other Computer and tried to run the Index file it doesnt works if it is in an single folder it works. The thing i need is the Index file alone has to be placed on the main folder and rest of the Swf file has to be placed on sub folder so when i run the index file it has to load the required swf file from sub folder this even have to work when i run the application on some other computers.
I have a movieclip instance named 'placeholder' on the canvas, and I want to change the alpha of the named movieclip from it's class without effecting the alpha of all the movieclips of the same type. How would I specifically target the named movieclip instance that is on the canvas?
[URL] I'm using 2 .swf files. The Main.swf file loads the portfolio.swf file when you click on the Portfolio tab. On the portfolio.swf page I have 4 buttons that go to different frames on the portfolio.swf file The buttons do not work when you click on them and I have no idea why.
Im loading an xml file file that has 32mg, and it is taking up to 30 minutes for flash to load it. Is it normal to take that much time to load a 32 mb file??
I want access MovieClips Dynamically from the external flash file.There are 5 MovieClips named Loader_1_mc, Loader_2_mc,.Loader_5_mc like so. Each of this movieClip contain 5 movieClips by named acc_1,acc_2, acc_5 like.How Can I access From the swf file. i tried few steps within nested loop.[code]
I can get the movieclips into the container movieclip, but they're supposed to float around within the boundaries of container movieclip.Unfortunatly they just float off stage...I THINK THE IMPORTANT PART IS AT THE END OF THE SCRIPT IN THE ON ENTER FRAME HANDLER [code]
Currently I have a MovieClip that when you roll-over it a hover menu pops up. But I also needing to have that same MovieClip when rolled=over load another external SWF inside an empty movie clip.
I'm loading a external text file to flash and according to the number present in the text file i'm trying to do a IF - ELSE command. It's not working coz the value I load from the external file is string. How can i get this as intiger.
