ActionScript 3.0 :: Loading Some Very Poorly Built Swfs Into A File?
May 6, 2010
So I am loading some very poorly built AS2 swfs into an AS3 file.I am able to open them and close them (addChild and removeChild)The problem I am now faced with is each of these AS2 swfs contain video using the AS2 FLVPlayback component. When I open the first SWF, the video plays fine, I close the SWF(removeChild). Then I go to open the next and the video will not play.
If I reload the page and open that second video first, it works.It seems when I watch a video for the first time no matter which AS2 swf I pick, it works. Its when I close it and open another one is when it doesn't work..
View 1 Replies
Similar Posts:
Mar 28, 2010
loading 2 external swfs into one main file using 1 preloader, I have figured out how to get the preloader to handle the correct # of bytes loaded and such but my 1st swf I want to load onto the stage is a video file and I want it as the background but I don't want it to start until after they are both (the video and main file - 2 external swfs) loaded and then I want to start the video and place it on the stage first, then place the main swf on the stage.
I can get the order right if I place them into my load complete function but then my buttons don't work on the main file.
Here is the code:
var bytesLoadedVidBG:Number = new Number();var bytesTotalVidBG:Number = new Number();var loader0:Loader = new Loader(); // load video BGvar loadedSWF0:Object;loader0.load(new
[Code]......
View 3 Replies
Sep 11, 2009
I have a main fla file which loads an external swf into an empty movieclip on the main timeline which works fine but I want a button in the external swf to load another external swf into another empty movie clip on the main timeline.eg. start.swf loads UKEIAMap.swf into (empty movie clip within start.swf) MapLoader_mc then a button havant_b within UKEIAMap.swf needs to load HavantProjectSheet.swf into (empty movie clip within start.swf) ProjectSheetLoader_mc without unloading UKEIAMap.swf
View 3 Replies
Jul 5, 2011
I have a script that takes lots of content and builds 1000s of MovieClips on the stage, does lots of drawing etc. Due to the high amount of work needed when the frame first loads this can sometimes be delayed by a second or two. The more the user uses the application the longer and longer this is likely to be (more data to siphon through and build). My question to you is how do I make sure the frame doesn't show (serve a loading image or something) until it is built? I don't want the user to see the skeleton of the page and then everything appear a second or two later.
View 1 Replies
Aug 2, 2006
Flash - 8 : Above is an example of what I would like to do/have done. I've gotten as far as loading the "loaded.swf" into the "start.swf" but my problem is I'd love to use that little loading action I made earlier without copying and pasting into the new movie the same actions for a different link. So, how do I load "loaded2.swf" into "loaded.swf" via the link in "loaded.swf"?
View 1 Replies
Aug 15, 2009
I'm pretty new to Flash. I have slowly built up an .fla file to its current size of 44MB. It is in AS3 (CS4) and has numerous jpegs imported into it with animated masks over each.I am now experiencing multiple issues that have made it impossible to work on it.
1. A week ago I started occasionally getting "Flash has has unexpectedly quit" error messages, whereupon Flash would crash. This was before I started adding many of the jpegs and the file size was still something like 5MB. Now I receive these messages almost constantly - If I try to open a second file within Flash or when I just work in my main file for a few minutes.
2. A few days I ago I started getting a few random messages saying "error initializing java runtime environment you may need to reinstall flash". This was fixed by simply restarting Flash, but still troublesome.
3. Rarely I would finish working on something and try to test the movie. It would go through the loading bar, but then nothing would happen. The only way to fix this was to go back to a previous file version and rebuild from there. My current file save has this problem.
Now I am stuck because I have to go back quite a ways to find a file that will successfully test. On top of that if I try to import one of my new movieClips into the older file version, Flash of course crashes.
Is the file too big? It doesn't feel like I'm doing that much. I've definately seen flash sites that have way more going on than mine. Could it be all the imported jpegs? Could I be importing them in a bad way? How can I avoid/fix these issues?
View 2 Replies
Feb 1, 2010
This was super easy using AS2. I had 2 'loader' movie clips placed on the stage and simply used the loadmovie to bring up the external swfs. How would i accomplish this using AS3? I simply need one movie to display on one side of the stage, and another on the other side of the stage. do i still use these 'loader' movie clips?
View 4 Replies
Oct 6, 2009
Whenever I draw a shape with Object Drawing turned on the blue bounding box that appears whenever it is selected isn't aligned properly to the outer edgers of the shape. Like this:
Admittedly it isn't a major problem it's just a bit irritating especially when people I'm teaching to use Flash ask me why it looks the way it does.
Does anyone else have this problem?
View 11 Replies
Dec 29, 2010
I want to make an XML document from an HTML one so I can use the XML parsing tools. My problem is that my HTML is not guaranteed to be XHTML nor valid. How can I bypass the exceptions? In this string <p> is not terminated, nor is <br> nor <meta>.
var poorHtml:String = "<html><meta content="stuff" name="description"><p>Hello<br></html>";
var html:XML = new XML(poorHtml);
TypeError: Error #1085: The element type "meta" must be terminated by the matching end-tag "</meta>".
View 3 Replies
Oct 20, 2011
I'm scaling text from small to large using tweens, but when the text is scaled, it turns into these unreable blobs. The text is still editable, just not useful. (The output looks fine, however.)Is there a setting, or a different method, I should be using to scale text in a tween to prevent this?
View 3 Replies
Aug 13, 2010
I am loading multiple .swfs into multiple .swfs, but the .swf are never being properly unloaded. I thought they were unloading until I started monitoring my Page File Usage and seeing it increase everytime I loaded another external swf.
In using this function to load my content, what would be the proper way/function to unload the content?
[Code]...
View 2 Replies
Nov 23, 2009
Using Flash 9.0 on Mac. Have externally loaded images as slideshow in swfs embedded in dreamweaver. The swfs load time after time in Firefox PC and Safari PC but only on the first try in IE7. Have not been able to test IE8 yet. [code]...
View 6 Replies
Feb 1, 2012
I have a SWF that contains 3 spaces for banners on a 'My Account' page. Initially they all showed the same banners to all customers but now we segment customers and that means each banner can have numerous variations. This has caused the SWF to be massive (over half a meg) for something we aim to have 80-100 Kb.
I believe the solution is to have the current 'main' SWF be a place-holder that decides what segment the customer is in for each banner then pull another SWF file from the server - so only the banner being displayed is the one being downloaded.I cannot find AS to download externally hosted SWFs...
View 6 Replies
Apr 9, 2009
The three buttons on the stage all load remote SWFs into the same location ... Each succesive button that is pressed is supposed to load a movie that takes the place of the one that is currently thereThe problem is, each button click merely loads it's movie underneath the existing one ... so they just keep stacking up on top of one another. I need a way for the code to check if a movie is loaded, and if so, unload that one first before it loads the current one I though an "if" statement could check to see if the "swfLoader" instance is fully loaded, and then if it is, it would know to remove child I know there must be a more efficient way to see if anything is on the stage
stop();
unit13_3br2ba.addEventListener(MouseEvent.CLICK, getUnitSWF);unit21_2bdStudy2ba.addEventListener(MouseEvent.CLICK,
[code]....
View 6 Replies
Feb 23, 2008
1) I made a german and an english swf-file, each of them containing the entire website. These two you catch from the main index-file, which is only a txt showing "german" and "english". When you click one of them, you load one of these two swfs.It takes some time, because the swfs contains a lot of heavy images which are glued to the swf. Ill get back to that loading swfs later...
2) inside each of these two swfs I made some PHPfunctions. One is a guestbook, the other is a form, where you send personal info (4 boxes, single-line) + a message in multiline to my email through PHP.When I publish the swfs individually and one at the time WITHOUT the main index (english/german) which loads the swfs it works almost fine. The input txt boxes appear on the screen, and you can type in the boxes. When I recieve this email through PHP, it up a bit. There is no space between " message" and "apartment of choice", its all one long line. Apart from that, it works...
However, when I load the swfs using the "main index file" with the german/english choice, the input boxes doesnt even SHOW on the screen. Only the txt telling you where to write what. The txt-curser shows, though, and you are aware, you should write something here, but you write using WHITE txt. When you click "send" in the GuestBook, the email looks good, the message is there, but writing the message on the website, you dont see what you write, because it white!
QUESTION:How do I load external swf-files ( not only images, but entire files, that itself is told to load other swfs) into a main, so that the PHP inside these swfs are working properly? If I am to write some script inside the indexs ASRunActiveContent, where do I write it?
View 1 Replies
Apr 18, 2010
I have a site that has one main file and then another five sub swfs that get loaded in when you click on various buttons. I would like to load these sub swfs behind the scenes, even before they click to open them. Is there a way to load them into some mc without adding it to the stage, but making it so that when they do click to actually load that swf in, it will already be cached? I'd prefer not to do a traditional preloader for each and every sub section. I'd rather just load in all the sub swfs, have them cached and ready to go so that when they do click on a section, it will be good to go.
View 1 Replies
Dec 2, 2009
I have been working on a project which has been giving me headaches. I want to be able to navigate through a presentation using the arrow keys - To do everything on the one timeline was going to be too complicated and messy so tried to create separate files but could not get the separate files loading -.My next problem is incorporating the two approaches - here is my code from my test files with my attempt added:
stop();
// create an array to hold the names of the frame labels
var labels:Array = new Array();
// take the name of each label in a MovieClip and put each
[code]....
I can either get the arrow key navigation to work or the previous movie to load but the left arrow key then doesn't navigate back. Although in saying this version doesn't work and I can't get it load again.
View 4 Replies
Nov 21, 2010
I have a conundrum in that I have 5 SWF files, I have various buttons in these SWF files linking to one another. Now all I want to do is have these buttons open up the relevant SWF file (and therefore completely replace the current SWF).I have been using a Loader class so far, but have just realised that this simply loads the new SWF into the original one! (Because I am dense), and everytime a button is clicked its loading the SWF on top of the original (slowing down my program quite a lot, as you can imagine!)
Is there no simple way of just linking these SWFs together without loading them on top of another? (I looked up unloadAndStop, but I can't get it to work in my SWFs! I have also read containers being mentioned, but I would rather stay clear of that as well if I can!)
View 1 Replies
Dec 11, 2010
I have a problem. We have a website www.onlinerealgames.com which hosts the game developed by our company. Recently we wanted to change the template. We are testing the new template in a subdomain of ours which is www.onlinerealgames.in . Everything is fine except that the swfs in the server are not loading. Instead they are showing Movie Not Loaded. If I directly access the swf with the URL it showing the download option window.
We are having seperate database for both sites. Both have same swfs. If we change the source from .in to .com then the swfs are loading properly (in the src property of embed tag)
View 3 Replies
Feb 1, 2010
I'm trying to load external SWFs in a for loop, and I have this problem that is really eating me: In the event handler I need to know the filename of the SWF that was loaded, but I can't obtain this.
function loadManySWFs(arrayOfFileNames:Array)
{
for(var i=0; i<arrayOfFileNames; i++)
{
[code]....
View 1 Replies
Jan 12, 2010
how can i load 3 external swfs into one movieclip at the moment i can only get it to load one or it may be loading each clip over the previous one.
View 3 Replies
Apr 27, 2011
A little while ago, I made a movie that toggles between 2 SWFs on 2 frames. You can see that here -- [URL]
Here's the code I used to make that happen:
ActionScript Code:
var swfholder:Loader=new Loader();
a_mc.addEventListener(MouseEvent.CLICK, loadLeg);
b_mc.addEventListener(MouseEvent.CLICK, loadHouse);
[Code]....
For just two SWFs, that is a TON of code. What's a technique I can use to shorten my coding process now that I have 6 SWFs to switch between?
View 2 Replies
Aug 13, 2009
how to load external swf files(9) into my master.swf file one after the other. This is the Actionscript i have written so far.....(AS2)
var myItems:Array = new Array("swf01.swf", "swf02.swf", "swf03.swf", "swf04.swf", "swf05.swf", "swf06.swf", "swf07.swf", "swf08.swf", "swf09.swf");
var myMCL:MovieClipLoader = new MovieClipLoader();
var myListener:Object = new Object();[code].......
The first swf loads alright into my master swf but i can't for the life of me work out how to load the rest after each one has finished loading. Don't know if i need a for loop or what?
View 3 Replies
Apr 27, 2006
I'm doing the tutorial for "transitions between external SWFs", but I'm having a problem because in the tutorial all of the buttons are on the main timeline, but in my site the buttons are on a different timeline. This is the actionscript that the tutorial tells me to use....
on (release) { if (_root.currMovie == undefined) { _root.currMovie = "work"; container.loadMovie("work.swf"); } else if (_root.currMovie != "work") { if (container._currentframe >= container.midframe) { _root.currMovie = "work";
[code].....
View 5 Replies
Dec 23, 2006
My site loads a .swf into a blank movie clip when the site loads.target.loadMovie("coachGameDay.swf");
When a viewer loads the site again, I want a different .swf to load. Or if I hit the refresh button on the browser, I want different .swf to load. Giving it the appearance of .swfs loading randomly.
View 6 Replies
Mar 1, 2009
i have main swf that loads external swf, here is the main FLA. the animation begins and stop at frame 71:
frame 71: there is empty movie clip with instance name container, this code in frame 1:
ActionScript Code:
var currMovie:String = "section1";
[Code].....
at this point, it loads sec1.swf, but when i click to load other swf, it will not respond.
View 3 Replies
Feb 22, 2009
iv made a flash site using as3 using the actionscript on thefirst frame, this by itself works fine.iv also used an online tutorial tocreate a dynamicslideshow/photo gallery which again works fine, but this time usingan external .as file.When i try to load the external slideshow/gallery into amovieclip in the site it dosnt work and i get this error:TypeError: Error #1009: Cannot access a property or method ofa null object reference.im pretty sure its because the code used in the main flashfile is on the timeline and the code in the external file to beloaded in is in an external as file.
the code im using to load the external flash file is:
var toload =new Loader();
toload.load(new URLRequest("newfile.swf"));
[code]....
View 2 Replies
Jul 2, 2009
I'm trying to create a site which loads external SWFs into a Moviefor its content, and the entire site is contained in a Movie Clip located on the main timeline.
I keep getting a 1009 error, so I'm assuming that AS isn't drawing the loader where I want it to be, so I'm fairly certain I'm doing something wrong..haha.
Here's a link to my Files: [URL]
View 2 Replies
Feb 2, 2010
I have several swfs that now need to be brought together from one navigation menu/home screen that I need to create. This was easily done in as2 (replacing one swf with another when loading). Is this at all possible with as3? and if so what's the best approach?further info:the navigation screen will be an arial shot of a cartoon village, when you click on a house it should open up the swf activities than i've already created.
View 2 Replies
May 20, 2010
I got a webpage with a main swf.
That main swf is trying to load language files xml files and other swfs in other folders...
I got the error code that the source path can not be found... I have checked this and it is the correct source path because if I run the single swf that doesnt work from its specific folder than it is all fine. but the swf and its connected xml files doesnt work from another folder.
However if I move all the files to one folder and change the source paths then it works... I can not divide the languages into different folders and then load these files from the main swf...
How can I load different swfs with connected xmls from different folders without source paths problems?
View 7 Replies
