ActionScript 3.0 :: Make A Mc Gotoandstop To A Certain Frame According To The Mouse's Position?
Apr 16, 2009
Well, basically what I want to do is, if the mouse is on the left side of the movie clip.. the movie clip will then play ( "A" animation inside the movie clip) vice cersa, if the mouse cursor is on the right side of the movie clip, the movie clip will then play ("B" animation inside the movie clip)
To put it simply, I would like to make a character in a game which faces the mouse cursor and chasing (with a runnning animation) after the mouse cursor but not rotating. I've got the movie clip slides along with the mouse working well, now I just need the mc to face the mouse cursor.
View 3 Replies
Similar Posts:
Oct 6, 2009
I want to make the timeline go to the next frame (ie gotoAndStop) only if two button instances are invisible. For the buttons I have scripted an on(release) to make them invisible, but I don't know how to use the if function to make my animation progress when they are both invisible.
View 7 Replies
Feb 8, 2007
I have a movie clip on the stage and have given it the instance name "team1". inside this movie clip there are two states. at frame1 it says one thing, then at frame 10 has an image. team1 stops at frame 1 and what i want to do is when the main time line reaches say frame 50, i want the team1 movie clip to gotoAndStop at frame 10, thus showing the image and not the text. i tried doing it by putting this on the main timeline at frame 50: team1.gotoAndStop("team");
View 2 Replies
Mar 26, 2009
I am attempting to create 360 degree spin-around product viewer. So far I have a movie clip with 24 frames, each one with a different 15 degree angle shot of the product. Upon playback of the movie, the product appears 3D, spinning 360 degrees.
That was the easy part. Now what I need is to be able to click and drag the product to change which view you are seeing (or which frame in the mc you are on) thus producing a spinning effect. How can you code, in AS3.0, that when the mouse is clicked and drug, go to a certain frame based on the current X position of the mouse?
View 21 Replies
Jun 19, 2010
I Want to change where my mouse x and y is when i enter the frame...
View 1 Replies
Sep 21, 2011
What I want to do is have a left arrow MC on the left side of the stage and right arrow MC on the right side of stage. When the mouse is over the left 1/3 of the stage, the left arrow appears, on the right 1/3 of the stage, the right arrow appears, but the middle 1/3 the arrows fade out.
I do NOT want to make large invisible MCs and detect the mouse movement that way. I just want it to be relative to the mouse position on the stage. I thought it would be very easy, but the eventListener fires everytime the mouse moves, so the left and right arrow MC animation is constantly being triggered, and they look like they are "shaking" for a lack of a better word.
[Code]...
View 1 Replies
Jan 8, 2010
I am having problems with gotoAndStop and mozilla. I am loading an external swf ( which is Flash MX 2004 ) swf. In this swf, there are 200 keys frames. Here, i am using a command gotoAndStop(110). Now after publishing, when I am viewing in IE browsers, I can able to see the 110th keyframe position exactly. But when i am viewing the same html in Mozilla, I am getting random positions. Here am not getting 110th position.
View 1 Replies
Jan 8, 2010
I am working in Flash CS3. I am having problems with gotoAndStop and mozilla. I am loading an external swf ( which is Flash MX 2004 ) swf. In this swf, there are 200 keys frames. Here, I am using a command gotoAndStop(110). Now after publishing, when I am viewing in IE browsers, I can able to see the 110th keyframe position exactly. But when I am viewing the same html in Mozilla, I am getting random positions. Here am not getting 110th position.
View 1 Replies
Jul 23, 2010
I trained on flashMX back in the day and haven't done anything since so now I've got CS5 it's a bit like being at school again! I have a circular dial sat in the middle of the screen with an arrow placed on it's edge. How do I get the dial to rotate so it always faces the mouse pointer?
View 7 Replies
Oct 9, 2007
I have recently followed a tutorial to make a movieclip in flash that makes buttons spin around a point depending on the mouse position. I have made my own version off this and would like to use it in a full flash website that i am making at the moment.
The only problem that i am having is with aligning this clip and as it is made up of script i cant physicly drag it to were i want it. I understand how to alighn this with x/y positioning but when i preview the flash in a web browser it is positioned correctly but then when i 'full screen' the browser this clip jumps about 4 inches down the page.
View 1 Replies
May 5, 2010
All I want to do is make something when my mouse enters or leaves the frame in actionscript 2.0. This is how new I am to this actionscript business.
View 10 Replies
Jul 7, 2010
I have tried using gotoAndStop(nextFrame) and gotoAndStop(currentFrame+1) in my code and neither of those work right. How would I get it to work the way I want it to?
View 1 Replies
Sep 8, 2010
i am trying to make a mouse-drawing function which is frame independent (for collision detection).somehow my trigonometry brain part seems to be out of order. fill in the blanks?here is my code so far (simplified):
Code:
mport flash.events.MouseEvent;
import flash.geom.Point;
[code]......
View 0 Replies
Nov 14, 2009
I know you can set a gotoAndStop on a particular frame after a time delay but what about a Mouse Movement Delay. Meaning if the mouse isn't moved for 30 seconds, the movie will gotoAndStop on a final frame.
View 5 Replies
Sep 30, 2009
I have an instance of a movie clip on the stage that jumps to different labels (within the movieclip) when the large buttons at the top of the scene are in rollover state. The problem is that it stays there when the mouse leaves the button.
How do I make that symbol go back to frame one (not there) within the movie clip so that it disappears when there is no activity on the buttons?
Is there a button parameter like MOUSE_OFF (I know that's not one)?
View 1 Replies
Jan 3, 2010
I want to make the player execute the code in the same frame. If I do a gotoAndStop to the same frame number, nothing happens because AS3 assumes since that you're already there, so nothing happens.
View 3 Replies
Feb 1, 2006
Basically the x position of the mouse should control the play position of a movie. Do I need something like an event handler (I'm not sure exactly what these do, but I've seen similar scripts that seem to use them).
View 2 Replies
Nov 12, 2009
I have an Input Text area that users can edit and then submit. I need to be able to show, on screen, the cursor's current position as they type. I don't need to know where the mouse is but all work-arounds I've found so far can only tell me the mouse position. The font for the text is 'courier' or 'courier new' and the Input Text area is scrollable.
View 8 Replies
Mar 6, 2009
I have an AS2 flash movie that has some labeled frames. On the first frame of a particular scene, I have some code that creates a menu of buttons that I construct from movie clips and vector graphics. The onRelease function of those buttons is assigned deep in some code thusly:
code: buttonMC.onRelease = function() {
trace('release, going to ' + this.sceneName);
gotoAndStop(this.sceneName);
};
When one of these buttons is clicked, the scene name reports correctly, but the movie goes to a frame 3 frames later than the targeted frame. I know this because I put trace actions on the subsequent frames like this: code: trace('2 after');
View 1 Replies
May 7, 2010
I've got some code and I'm using gotoAndStop but am in need of something to play to the frame instead of just jumping.
Code:
var beginX:Number;
stage.addEventListener(MouseEvent.MOUSE_DOWN, handleMouseDown);
stage.addEventListener(MouseEvent.MOUSE_UP, handleMouseUp);
[code]...
View 3 Replies
Jun 2, 2010
I'm making a slideshow which pauses on each slide for 10 seconds, and there are also navigation buttons to go to each slide independently. I have this code (which I got off the interwebs) in a separate actions layer to pause the slideshow, independent of any button actions. This, for example, is an action on frame 2[code]...
View 2 Replies
Nov 16, 2009
I am having a problem with the gotoAndStop function in my CS3 flash application. I have 3 frame on my timeline (keyframes). I click on a button of the first frame and pass to the frame 2 by having a listener on the button doing : gotoAndStop(2,"Scene 1"). Frame 1 and Frame 2 contains both a different Datagrid (as a MovieClip)
I have a problem appearing here. The datagrid from frame1 is still displayed under (kind of background) the datagrid from frame2. They are kind of superposed. The datagrid is the only element from frame 1 having this behavior. The buttons and text area are not displayed, following the normal behavior. Here is the part of my code doing that :
[Code]...
View 0 Replies
Jul 13, 2010
I have a website and it functions fine but I want to make a few alternate versions, exactly the same only they start on a different frame. I tried adding a gotoAndStop(9); into the actionscript on the first frame drag all clips when i drag single movie clip(which only contains event listeners and functions) but for some reason part of it goes to frame 5 and part of it does nothing. Only when I click the button that links back to frame 1 does frame 9 load.
View 1 Replies
Nov 20, 2011
I'm making a banner for a "client" and he wants me to make it like yahoo's news banner. I understand that they're using HTML5 and I haven't learned that yet. Anyways, I did a great job learning the banner in less than a month.
(I'll try to make this short) The banner has a 5sec pause and then it proceeds to the next frame. It also has 6 buttons that will direct the user to a specific banner that he/she wants to click. He wants the banner to stop and stay on a specific frame and not proceed further. I have achieved that, but here's the problem.
[Code]...
View 0 Replies
Feb 2, 2009
I'm having an issue with some pictures and a gotoAndStop on frame one command. I have pictures on my website that appear when clicked on, and I've placed a simple close button in the top left corner of the picture that simply tells flash to go back to frame 1 (gotoAndStop(1)). However, it seems that in Internet Explorer (not in FF) when the close button is clicked it goes back to frame one but it leaves part of picture still displayed although it seems to dissapear in segments when rolled over with the mouse. Here is the website where this is occurring: [URL]. Btw, I'm using the flash eff component, but the problem seemed to still occur after i removed all flash eff instances.
View 2 Replies
Jan 16, 2010
Is there a way to move to next (not specified) label frame without indicating a specific name?I have a portfolio movie clip with images, using the AS3 Tween Class.I have a "next" button that hopefully will trigger the tween to NEXT label.
here is my code:
var myLabels:Array = ["print", "printA", "printB", "printC", "printD", "printE", "printF"];
next_btn.addEventListener(MouseEvent.CLICK, clickNextSection);
[code].....
View 3 Replies
Aug 16, 2009
i need to gotoAndPlay then gotoFrame and stop at frameEXAMPLE: gotoAndplay from frame 2 then when it reaches frame 10, i want it to go to the Parent frame with a gotoAnd stop at frame ("willy")so far i have put this script on frame 10 but when it gets to frame 10 it just stops, it does not jump to the parent frame "willy"PLAYS TO FRAME 10 then: gotoAndstop this._parent._parent. ("willy)
View 4 Replies
Jan 31, 2010
i can not seem to get a button working with simple gotoAndStop frame . its setup like _root > EMC_photos > photos_thumbs_ani now in photos_thumbs_ani i have several photo pages all setup every 100 frames with labels page 1, page 2 etc my button is within photos_thumb_ani as a movieclip with code inside this.onRelease = function(){ _root.EMC_photos.photos_thumb_ani.gotoAndStop("pag e2");} I have tried different variations to no sucess
View 2 Replies
Mar 1, 2011
I'm making an app in flash as3, but there is a bug in my code. (i guess)
-I can go from frame 1 --> frame 2
-I can go from frame 2 --> frame 3
If i try to go from, let's say frame 3 --> 2, I get this message:TypeError: Error #1009: Cannot access a property or method of a null object reference.Why cant I go to a previous frame on my timeline?
View 9 Replies
Aug 29, 2011
I have been following Doug WInnie's tutorials on flash, and am up to ep17: http:[url]....He briefly mentions these functions at the end, but doesn't go into any detail: Add event listener and callback function for roll over of the
ballmyBall.addEventListener(MouseEvent.MOUSE_OVER, ballOver);function ballOver(e:MouseEvent)myBall.gotoAndStop('glow');}[code]...
When I tried doing this, I labelled one frame within the myBall movie clip 'normal' and the next one 'glow' and I added a filter glow to the ball on the glow frame.When I play it back, and mouse over the ball it flickers really quickly between glowing and not glowing, and when I mouse out it returns to normal and stops, but I thought it should stop on the glow frame as well.
View 11 Replies
