I am quite new to actionscript 3 here is what I want to do: When the mouse hovers over a movieclip I want another movie clips alpha to go from 0% to 100% then when the mouse moves off of the movie clip the reverse happens.
View 2 RepliesWhen I mouse over a movieclip, I want its alpha level to change. Here's what I have:
ActionScript Code:
object.addEventListener(MouseEvent.MOUSE_OVER, mouseOverObject);
object.addEventListener(MouseEvent.MOUSE_OUT, mouseOutObject);
function mouseOverObject(e:MouseEvent){
if(!inventoryOpen){ e.currentTarget.alpha = 100; }
} function mouseOutObject(e:MouseEvent){
if(!inventoryOpen){ e.currentTarget.alpha = 50; }
}
It does work, but the mouseover only registers when the cursor is over certain areas of the movieclip.
I have a basic mouseover in my flex application which changes an image onmouseover and changes it back onmouseout using the code mouse Over "functionToChangeImageSource()" and another one to mouseout.It works fine when you slowly mouse over and out, however if I quickly move the mouse over it, it occasionally stays on the mouseover image and the mouseout function doesnt appear to kick in. Is there anything I can do to fix this, or does anyone have any ideas why its happening?Also, I've tried the rollOver and rollOut instead but it has the same problem.[code]I'd imagine you're correct about the mouseover event not completing before mouseout is but how to I fix this?
View 3 RepliesI want to achieve the effect on [URL]. The effect on the left on the about page in which when the mouse moves over the alpha of the object goes to 0%. I have all the layers set up with masks and all but need the action script. I tried applying the following code to a mask which I converted to a movieclip.
on(rollover){
this._alpha--;
}
But this did not work for some reason.
I have been tasked to create banner that has four mouseover areas. The main body of the banner--which includes hyperlinks--and the background of the entire banner must change as the user mouses over the four areas. See the diagrams at the following link (it is not working properly):I attempted to complete this task as follows, but it really isn't behaving properly. I created a layer of buttons and text, and set the alpha levels to 0 for the "over" state of each button. I then created four separate layers containing the appropriate content. When the user mouses over a button on the left, the proper layer would be displayed. I planned to use Actionscript to accomplish this; pseudocode here:
IF button1.mouseover == true THEN { display layer1, hide layers 2, 3, and 4 }
IF button2.mouseover == true THEN { display layer2, hide layers 1, 3, and 4 }
IF button3.mouseover == true THEN { display layer3, hide layers 1, 2, and 4 }
[code].....
I can't change background color on mouseover.I dont know if the right code isdocument.getElementsByTagName("a").style.backgroundColor = "#FFFFFF";
HTML & CSS:<span></span> inside the </a> tag does not work, so I am forced to use <div> to label the buttons.I just use 669px instead of 666px so that you can see the pixel difference. I just want the<div id="nav"> content right aligned but if I don't use float everything gets inheritedbackground color and also gets unstructured, if I use float the buttons get reversed, is there an alternative way because this could cause cross browser problem.
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" dir="ltr" lang="en-US" xml:lang="en-US">
<head>
[code]....
I dont't want to overoad the css, thats why I have not use unordered list.I have a preference for table tag because it is older than div tag.
I have a menu that is created dynamically with XML, how to change the text on a mouseover?
View 0 RepliesIm a newb at this, and I dont want to use motion tween so what is the actionscript to change font color of the text in a textbox? Does the textbox have to be in static or dynamic? Does it not matter? I got the coding to mouseover on a button that is over the textbox. button.addEventListener(MouseEvent.ROLL_OVER, rollOverHandler);and after mouseover i need to execute to change color[code]...
View 9 RepliesI want to change a sound in my code when the mouse is over an y point.
Code:
var musica:URLRequest = new URLRequest("sensor.mp3");
var sound:Sound = new Sound();
var soundControl:SoundChannel = new SoundChannel();
sound.load(musica);
addEventListener(Event.ENTER_FRAME,update);
stage.addEventListener(MouseEvent.MOUSE_MOVE, Inicial);
Here, I need to change the sound to another one.
Code:
if(mouseY > 250){
var musica:URLRequest = new URLRequest('som2.mp3');
sound.load(musica);
}
but it isn't change.
I want to change the color of the text on mouseover (its a dynamic text field). I cant get it right!
View 3 Repliesin CS3, and preferably Actionscript 2.0, to make a mouse over a button action that would go to a specific scene and frame, depending on the button? I have 5 buttons, and ould like, on rollover only...no click/down, to have the playhead go to a different scene and start playing from a specific frame #. Or do I have to do the click/down action?
View 7 RepliesI'm doing a project for work and need to change the color on this file I purchased from iStockPhoto. It is a world map flash file, which highlights the country you select in green. I simply want to change it so that all highlights are done in Red instead, but am not a flash developer so not sure how to do it.
View 9 RepliesA component in my main project has 2 states. I want to change the component's state when the mouse is over the Parent.
View 2 RepliesI want to create an animation like this one [URL]. You can see on the home page 4 blocks of pictures on which if you mouseover you will see it change and display text. I know how to do this. But When you mouseover one block and come out of it, the text will be still there until you move onto another block, which I don't know how to.
View 2 RepliesI have a dynamic text field that is rendered as HTML. Everything works fine, but I would like the user to know which link they are moused over...Is there a way to do a mouse over change color on dynamic text? I think I have seen it done. I'm using Flash MX.
View 2 RepliesI have a master movie with navigation that loads a external swfs. The external swfs serve different purposes and typically have a series of buttons that navigate the timeline. The external movies with their buttons work fine running individually. When the movies are loaded through the master movie, the buttons in the external movies looses the cursor change on rollOver. These are basic invisible hotspot - button symbols. The buttons typically navigated to different frames. I am curious why the cursor change fails when loaded through the main movie, but works when run on its own.
Throughout all the movies, I probably have over 200 buttons, I don't want to create rollOver and rollOut cursor changes for each. Again, these are basic button symbols.
I have a master movie with navigation that loads a external swfs. The external swfs serve different purposes and typically have a series of buttons that navigate the timeline. The external movies with their buttons work fine running individually. When the movies are loaded through the master movie, the buttons in the external movies looses the cursor change on rollOver. These are basic invisible hotspot - button symbols. The buttons typically navigated to different frames. I am curious why the cursor change fails when loaded through the main movie, but works when run on its own.I have done some searching in Google, but didn't find a similar issue.Throughout all the movies, I probably have over 200 buttons, I don't want to create rollOver and rollOut cursor changes for each. Again, these are basic button symbols.
View 2 RepliesI would like to change backgroundColor of an drawn object(square) by mouseover. I acutally found the function for mouseover in action scripts but BackgroundColor("#ccc") does not work.
View 3 RepliesI searched and found the code below which works fine to change the color. What do I do to make the color go back to it's original color on mouseout?
pedals.buttonMode = true;
pedals.addEventListener(MouseEvent.ROLL_OVER, changeColor);
function changeColor(e:MouseEvent):void {
var color_transform:ColorTransform=pedals.transform.co lorTransform;
color_transform.color=0x004433;
pedals.transform.colorTransform=color_transform;
}
I have created a finite menu and it works fine, the only problem is that now I want to have the menu set to 50% alpha and when the user moves the mouse over the menu it gradually increases to 100%
View 14 RepliesI am trying to dynamically change the alpha value of a set of movieclips on a timer. The timer works but I get an error message from the function. This is the error:
TypeError: Error #1010: A term is undefined and has no properties. at piedacoulisse_timer_fla:MainTimeline/zoom/piedacoulisse_timer_fla:onT ime()[piedacoulisse_timer_fla.MainTimeline::frame1:124] at
[Code].....
Im very new in the flash business and i started making a gallery after this videoi get 2 errors when i write te action code for alpha change. Is it because i use ActionScript3 instead of 2? because i made it with flash CS3.
View 8 RepliesBasically, I want to change the alpha value on my movieclip. I start my mc with an alpha of .08 (8%).
mc.alpha = .08;
What I then want to do is increment it to .9 (90%) and when it hits that, decrement it back to .08, and then when it hits that, increment it again to .9 etc.
I have tried
if(mc.alpha==.9){
mc.alpha -= .01;
}else{
mc.alpha += .01;
}
From what I understand you can change the alpha value of a textfield to be fully transparent. I would like to have chat output that fades after a while. I was wondering if there was a way to change just a portion of the string inside of a text field to transparent. The textColor does not have an alpha value. I could just use multiple text fields but I would like to avoid doing that if possible for efficiency sake.
View 1 RepliesI'm making a drawing API for my homepage. My homepage is exclusively created in Flash AS2... But I have a problem with my brush for the drawing API... I would like to change the opacity/alpha value of the brush, with keypress LEFT and RIGHT... But i can't get it to work!
Here is my code:
ActionScript Code:
lineThickness = 0;
selectedColor = "0x000000";
[Code]....
Ok. I am new again so I hope I am describing this correctly. I don't know the best way to do this but this is what I've dreamed up so far: I have a number of movie clips on my screen, all thumbnail sized images, each with an instance name (ex: tw_lifeoftheparty, tw_xmen, tw_xfiles, tw_diehard, etc.).
In each movieclip there are 2 layers: the thumbnail image(bottom layer) and a black border(top layer). The black border is an object named wk_border and isin each of the thumbnail movieclips.
I have given wk_border the same instance name in each thumbnail movieclip "border"
[Code]...
Let me try to explain what I'm doing. I have multiple movieClips (mc_aitkin, mc_anoka, there will be a lot more) on the stage that I want to change their alpha using data from an xml when it loads. I can isolate the info I want and trace it so it shows in output, but I'm not sure how to use it from there.
I've tried to convert the xml data to a number and do an if/else as shown below, but the only output I get is "not" (from a trace). So I'm guessing the if/else isn't recognizing the xml data as a number?
If I can resolve that, the next step will be to apply this function to the large number of mc's I'll have on the stage. Would that be with something like e.currentTarget.alpha = .5; ?? I don't think I can put it in the same changeAlpha function because there the property of 'e' would be undefined.[code]...
How can i change the alpha value of a movieclip through actionscript?
View 1 RepliesI want to make a button to change the alpha of an instance but I dont know how to make it.
Thats what I want: When I click the button, then the movie clip appears (alpha 100)When I click the button again, then the movie clip disappears (alpha 0)
I am making a website/online gallery. I have all my buttons assigning a frame number or value eg. [code]...
and then have all different movie clips loading depending on the the 'frameno'
My problem is that i want the button alpha to change when you are on that page. So i am assuming it would be something along the lines of.[code]...