Flex 4 :: Change Image On Mouseover / Mouseout Function Fails When Mouseover Quickly?
Mar 6, 2011
I have a basic mouseover in my flex application which changes an image onmouseover and changes it back onmouseout using the code mouse Over "functionToChangeImageSource()" and another one to mouseout.It works fine when you slowly mouse over and out, however if I quickly move the mouse over it, it occasionally stays on the mouseover image and the mouseout function doesnt appear to kick in. Is there anything I can do to fix this, or does anyone have any ideas why its happening?Also, I've tried the rollOver and rollOut instead but it has the same problem.[code]I'd imagine you're correct about the mouseover event not completing before mouseout is but how to I fix this?
View 3 Replies
Similar Posts:
Dec 30, 2011
I have a simple movie clip for which i bind two events 1-MouseOver and MouseOut
in these events i am just tracing simple text
But the Problem is when i take my mouse over the movie clip both events called tracing the string in the output panel
Infact, things should be done like that on mouse over, its text is printed and when i take my mouse away[out] from the movieClip MouseOut event should be called.
ActionScript Code:
import fl.motion.Color;
import flash.display.MovieClip;
[Code]....
View 1 Replies
Jan 24, 2011
I searched and found the code below which works fine to change the color. What do I do to make the color go back to it's original color on mouseout?
pedals.buttonMode = true;
pedals.addEventListener(MouseEvent.ROLL_OVER, changeColor);
function changeColor(e:MouseEvent):void {
var color_transform:ColorTransform=pedals.transform.co lorTransform;
color_transform.color=0x004433;
pedals.transform.colorTransform=color_transform;
}
View 3 Replies
Jun 8, 2011
I am building a graphic component in MXML that has different states, each state having its own size. I have a "normal" state and a "highlighted state", the highlighted one having a higher height. On this components I implemented a function to be executed on each mouseOver and mouseOut to change from normal state to highlighted state and back. My problem is, in the highlighted mode, the mouseout event is triggered according to the size of the normal state.
[Code]...
View 1 Replies
May 24, 2011
I am using a custom skin on Flex's TabBar, and specifically the skin the controls ButtonBarButton. The width of the button is a variable size depending on the text it contains, and background of the button is an image that only displays on the selected states of the button.
The following is my MXML for the skin:
<!-- states -->
<s:states>
<s:State name="up" />
[Code]....
I tried wrapping the entire block in a Group tag, but to no avail. The invisible Rect does indeed fix the "machine gun" flickering that occurred when the mouse hovered over any edge of the button, but there is still a flicker on every mouse enter and mouse leave of each button.
View 1 Replies
Mar 6, 2009
I have an image that grows on mouseover and shrinks on mouseout, and I'm using the following script for the events:
[code]...
The problem is that while the image is growing or shrinking,if the mouse is on the exact border it simultaneously gets stuck on both the mouseover and mouseout fuctions, resulting in seizure-inducing loop. Is there any way to ensure that a function completes once it's started, or some other way to avoid the simultaneous over/out condition?
View 3 Replies
Jun 25, 2009
I made this simple movieclip with over and out states. However my function does not work. When moving over the movieclip the mouse out event is called immediately. I don't know why this is happening.
ActionScript Code:
home.buttonMode = true;
function onOver (e:MouseEvent):void {
[Code].....
View 9 Replies
Feb 27, 2009
In the stage I have a MC called test. In this MC I have another MC called sub.
on MOUSE_OVER the test.sub should be visible and i want to be able to go to it and for example click it... but when I leave the shape it disappears before i reach it. I attached my test fla
View 2 Replies
Nov 8, 2009
I'm trying to create a mouseEvent for my 5 points but it's ONLY work on last point. While clicking on the others point the mouseOut and mouseOver doesn't respond, however the ONLY work on last point.
[Code]...
View 1 Replies
Apr 3, 2009
I've got the following movie online to look at:(disregard background, temporary image)URL...I have 3 icons (will be 4, the photos at the bottom of the movie).When hovering over a button, it should rise up around 50px, and on mouse out, it should drop back down to its original position.If you look at the movie, it does that, however, if you move around the images a bit you'll see that at some points it picks up 2 photos/buttons at a time (since they're overlapping a bit I imagine), but the BIG problem is that sometimes, when picking up both images, they do not return to their original position when mousing OUT as they should, they remain suspended as if they are stuck at the end of the onmouseover function and can't come back down.[code]
View 2 Replies
Jan 2, 2010
I want to make two custom cursors. One to be visible on rollover and second visible only on mouse down. Is this possible. I want to make game where cursor changes into mc1 and moves around with mouse but when you click mc1 is changing to mc2. Till now i managed to hide cursor, make mc1 to move with cursor but dont have any idea how to change mc1 with mc2 on mouse down and then mc1 to come back on release. Is there any other way to make this, my idea was to make 2 clips to follow cursors and use as to determine when each clip is visible, but it doesn't work.
View 4 Replies
Aug 16, 2010
I am using CS5 - as3 and getting error
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at index_nutro_fla::MainTimeline/manageMouseOut()
My mouser over is a moveclip use to work fine but giving this error
Here is the code
stop();
import flash.display.MovieClip;
import flash.events.MouseEvent;
bk_btn.buttonMode=true;bk_btn.useHandCursor = true;
bk_btn.addEventListener(MouseEvent.MOUSE_DOWN,
[Code] .....
View 2 Replies
Dec 22, 2011
AS3 page with text links that change to a new color on mouse_over and change back on mouse_out. Sometimes the links do not change back and all remain colored after mouse-out. I have never been able to simulate the problem on my several computers at several locations but have seen it happen on the clients computers. Is there a known issue perhaps with Flash/AS3/Flash Player Version# that might cause this?
View 1 Replies
Oct 13, 2011
how to make a basic image rotater by importing images and setting up motion tweens in the time line. That part works. When I hit ctrl + enter it plays through the images correctly.
Now I want to add an action script that will play/pause the rotator on mouseover and mouseout.
What I have so far is layers img1, img2, img3, img4 and an invisible button layer called buttonLayer.
I added a 6th layer and named it action.
Now every time I try to use one of the symbols from the library I get a "undefined property" error.
I have looked all over and find all kinds of tuts but none of the ones I'm finding tell the basics of how to use a symbol in the actionscript. Or how to make a symbol/instance/object in the first place. They just say things like "somesymbolname.play()" but when I replace that with my symbol name I get the error.
I've renamed all my symbols to img1, img2... because one thing I can see that is obvious is that there is no way "symbol 1" works in any programming language because of the space in the name. I'm confused that flash would automatically create a symbol with a name I can't use.
When I right click->actions to bring up the actionscript window for my action layer where do I start? And are there other things I need to do with the symbols and layers before I can use them in action script?
I'm attaching the fla file in a zip. how to add the actionscript it would go a long way in helping me understand how it all works.
I also tried saving the swf and then importing that into a new project as one single layer to work with and that doesn't seem to make a difference as far as figuring out the actionscript.
View 3 Replies
Oct 31, 2009
I have a simple rollover button that I want to use as a background image for a navigation on a drupal site I'm helping to develop. I'm not too skilled in AS3 and I can't figure out how to get the button to play on a mouseover and reverse on a mouse out - all from the current frame.URL...I set it up a motion tween that would play on a mouseover and then play a motion tween back to the original size on a mouse out but this only works if you stay on the button until it fully expands, otherwise it jumps around.
View 1 Replies
Jan 18, 2005
I like to learn to create this effect [Url]...When you mouseover the Featured Work, it expands and when mouseout it collapse. It is on the left side of the stage under the heading FEATURED WORK.
View 1 Replies
Jul 6, 2010
I'm wondering how I can make a Flash start playing a video on MouseOver, and stop playing on MouseOut.
View 1 Replies
Sep 18, 2007
I have downloaded the following code and tried to change it. It works so far, but the attached MC are "pulsating" - if I change them with another MC (with text inside) I can't use them as a Menu links - they are "pulsating" too much and I can't read/see the text properly. where in code I can change(reduce) this "pulsation"? how can I make the MC-s cklickable=working as a buttons with mouseover/mouseout effects (changing color etc.)
View 1 Replies
Sep 14, 2010
The following is the entirety of the script in my app;
import com.greensock.*;
import com.greensock.easing.*;
myclef_mc.alpha = 0;
mydisc_mc.alpha = 0;
myfader_mc.alpha = 0;
[Code] .....
The alpha property settings work fine - the one thing shows up and the rest don't. The mouseover event, however, fails to do anything whatsoever. Nothing is traced, no debug errors are returned. The most annoying part is that it was working before, but there were screwups with my layers so I went and redid everything. Now it does nothing.
View 1 Replies
Mar 30, 2011
I have collection of images getting from xml. That images placed in tilelist, i need zooming while mouseover which one image.
View 2 Replies
Apr 18, 2010
1) if I create items in a for loop, is correct to add a new eventListener for each item ? Or should I add only 1 eventListener to the parent ? and call the event through ID ? 2) if I want to scale my item, (a LinkButton with icon image), I noticed that the icon is sometimes resized with delay, so I have a bit of flickering when I trigger the event. Should I not use icons, and set the image in another way ? How can I fix this?
View 1 Replies
Sep 27, 2011
i have an object on the stage, and, on mouse over of that object, a menu made of 4 other objects appears works great i want the menu to stay there as long as the mouse is over one of the objects in the menu, or the original object that spawned the menu so for every object in the menu, and the original object that spawned the menu, i made mouse over and mouse out listeners they keep track of weather the mouse is on one of the objects, with a boolean that is turned true on mouse over, and turned false on mouse out and also on mouse out, there is an if statement that checks if all of these booleans are false, and if they are, the menu is removed the problem is that, when mousing between objects, the mouse out listener for the previous object occurs before the mouse over handler of the next object, the boolean check is performed, and the menu is removed before the next mouse over boolean is turned on i was thinking about making a timer to make the thing wait for a milisecond or 2 before making the boolean check, but there must be a better way to do this, since older computers take longer to do stuff this solution might be buggy.
View 1 Replies
Jan 8, 2010
I have been tasked to create banner that has four mouseover areas. The main body of the banner--which includes hyperlinks--and the background of the entire banner must change as the user mouses over the four areas. See the diagrams at the following link (it is not working properly):I attempted to complete this task as follows, but it really isn't behaving properly. I created a layer of buttons and text, and set the alpha levels to 0 for the "over" state of each button. I then created four separate layers containing the appropriate content. When the user mouses over a button on the left, the proper layer would be displayed. I planned to use Actionscript to accomplish this; pseudocode here:
IF button1.mouseover == true THEN { display layer1, hide layers 2, 3, and 4 }
IF button2.mouseover == true THEN { display layer2, hide layers 1, 3, and 4 }
IF button3.mouseover == true THEN { display layer3, hide layers 1, 2, and 4 }
[code].....
View 11 Replies
May 7, 2010
I am quite new to actionscript 3 here is what I want to do: When the mouse hovers over a movieclip I want another movie clips alpha to go from 0% to 100% then when the mouse moves off of the movie clip the reverse happens.
View 2 Replies
Aug 30, 2011
I can't change background color on mouseover.I dont know if the right code isdocument.getElementsByTagName("a").style.backgroundColor = "#FFFFFF";
HTML & CSS:<span></span> inside the </a> tag does not work, so I am forced to use <div> to label the buttons.I just use 669px instead of 666px so that you can see the pixel difference. I just want the<div id="nav"> content right aligned but if I don't use float everything gets inheritedbackground color and also gets unstructured, if I use float the buttons get reversed, is there an alternative way because this could cause cross browser problem.
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" dir="ltr" lang="en-US" xml:lang="en-US">
<head>
[code]....
I dont't want to overoad the css, thats why I have not use unordered list.I have a preference for table tag because it is older than div tag.
View 3 Replies
Aug 19, 2009
I have a menu that is created dynamically with XML, how to change the text on a mouseover?
View 0 Replies
Jul 27, 2010
Im a newb at this, and I dont want to use motion tween so what is the actionscript to change font color of the text in a textbox? Does the textbox have to be in static or dynamic? Does it not matter? I got the coding to mouseover on a button that is over the textbox. button.addEventListener(MouseEvent.ROLL_OVER, rollOverHandler);and after mouseover i need to execute to change color[code]...
View 9 Replies
Mar 27, 2012
I want to change a sound in my code when the mouse is over an y point.
Code:
var musica:URLRequest = new URLRequest("sensor.mp3");
var sound:Sound = new Sound();
var soundControl:SoundChannel = new SoundChannel();
sound.load(musica);
addEventListener(Event.ENTER_FRAME,update);
stage.addEventListener(MouseEvent.MOUSE_MOVE, Inicial);
Here, I need to change the sound to another one.
Code:
if(mouseY > 250){
var musica:URLRequest = new URLRequest('som2.mp3');
sound.load(musica);
}
but it isn't change.
View 6 Replies
Mar 10, 2009
I want to change the color of the text on mouseover (its a dynamic text field). I cant get it right!
View 3 Replies
Nov 4, 2010
I created a simple mouseover (like this one http:url... )with one small image that grows to a LARGER image directly on top of the smaller image when mouse is OVER the smaller image. When user mouses OVER the smaller image the larger image appears correctly.Problem is that even when user mouses OVER the "boundries" of where the LARGER image WILL appear, that also causes larger image to appear. What I want is for the larger image to appear ONLY when mouse is OVER the smaller image.
View 2 Replies
