I m under the process to create a platform based game,but stuck in a problem ,its probably concern with x-axis, actually my player stops certain distance before right wall and with left wall too,i tried to reduce the distance but end up in failure,i have attached the concern fla.
[Code]...
whenever I start my game my character just falls through the platform. No Compiler errors are appearing, and there's nothing in the outbox. I'm pretty sure it has something to do with my character not knowing that it must land on the platforms, but how would I write that?
View 2 RepliesImportant: ActionScript 2.0Flash CS3I have some knowledge in Java and C++ which makes this easier... Im trying to make a game and the collision *** does not stop the character in its spot... if i set _y to 0 then it would go to the top of the screen... if i set _y to -1 each frame that the hitTest is active then the character goes through the platform and the rises by -1 (1 up) _y .... how can i make it so the character is stopped immediatly when touching (hitTest) the platform?
[CODE].....
I have a game where the character walks around the screen and stops if she hits a wall or a hole etc... - typical. HOWEVER - I coudn't get her to stop walking. Is there any standard code for this. If you tell to stop walking then she can't walk back out either etc... Also, she walked into the hole a little so being in the hole she definately couldn't walk any more not even back out as she would be walking inside the prohibited zone.
View 3 RepliesI should always be able to call the Collision class without referencing it earlier. I have all the imports I need (Events, Movieclip, Keyboard, MouseEvents). For some reason though, when I enter any code involving Collisions, specifically:
Collision.block(player, block);
I get this error:
/Users/Mike/Documents/Main.as, Line 50 1120: Access of undefined property Collision.
Is there something previous to using the Collision Class I must do? Placing it in the same folder as the rest of my work? Some sort of unseen reference?
i have one ball and one rectangle in my fla file. i have finish to move ball using arrow on keyboard. but i want to check the collision when the ball hit the wall. i just can check the collision on the right side of the wall, the collision isn't work on the left, bottom and the top side of the wall
View 8 RepliesI am going to develop a very simple game for android and for iphone/ipad I have the option to develop it in cocos2d or in adobe flash air (i am not a developer, but i have 2 developers who are offering me the service)I have a developer that states that cocos2d is better and other one that states that adobe flash air.I want it in cross platform.the cost offered by both developers is the same..i have heard that adobe air has the flaw that it is very slow, is this real? if you had the 2 options which will you use to develop your game and why?
View 1 RepliesI'm creating a game at the moment for my university course and it involves the player character jumping on top of boxs twice to break them as opposed to just once.What would be the most efficient/simple way of writing this in Actionscript 3.
View 1 RepliesI'm using Flashcs3 in AS2.[code]My character gets stuck in walls and slows down trying to get out, also, hes about 10x faster now. any suggestions? Im working on a flash overhead shooter, multiplayer only. and I need the script to work so there can still be a bullet collision on each wall and not to be able to walk through it.
View 6 Repliesmake a character jump by using spacebar make a boundry (character can go no further than a wall or something)
View 1 RepliesI am trying to make a character jump on to a platform this is my code. The block1, block2 etc are the blocks that I want my character to jump on
PHP Code:
var onBlock:Boolean;
var blockHolder:Array = new ArrayblockHolder.push(block1)
blockHolder.push(block2)
blockHolder.push(block3)
stage.addEventListener(KeyboardEvent.KEY_DOWN, checkBlock)
[Code] ....
The onBlock boolean is used later but my problem is that the code doesn't work.
when i try to make the character jump when he is on the platform it doesnt work.
onClipEvent(load) {
speed=7;
jumping=false;[code...
So I have a simple game I'm making where you are a box shaped character and you have basic movement around the screen. I know how to make walls and the coding but I would like to make a wall that the character can't go through on either of the 4 sides or even a squiggly line that doesn't have a definite shape. I used this coding:
[Code]...
And that does kind of work, but it's not stable (works better with one side only). Sometimes one side of the wall, the character will still be able to go through. The tool I'm using to make the wall is a rectangle tool if that makes any difference. And I'm on actionscipt 2.0 on adobe flash cs4.
I have this problem when i go to shot and then have shot the gun all movie clips accessed after shooting dont stop playing but repeat continuously[code]...
View 1 RepliesI am doing a as3 platform game based in arrays, so inside the array I inserted a variable rh that inserts the bg in the stage but it doesn't show up in the stage. The code i have is:
Code:
else if (lvlArray[i] == 'ROCKYHILLS') {
var newRockyHills:backRocky = new backRocky;
newRockyHills.x = _root.stage.width/2;
[Code]....
I was trying to make a game, and the character inside the game could swim. However, I only wanted him to swim in short bursts that refueled every time he hit the ground.
View 9 RepliesI'm doing a kind of plataform map, and now I need to make health (3 hearts, like Mario). I tried to do it with hittest but the hearts goes like crazy. Guess I need to make something like invulnerable or I don't know. What I want to do is three hearts, and, if the human touches a spike he loses a hearth.
View 5 RepliesIn my basic platform game I have a "hero" that can walk and jump on the "ground." There is also a door to the next scene, which is the next level.The first scene works fine, but "TypeError: Error #1006: value is not a function. at Charles3_fla::MainTimeline/frame1()" pops up once in the output. It works however, and I'm not worried about it. The second I go throught the door though, Scene 2 opens, but then starts flashing as "TypeError: Error #1009: Cannot access a property or method of a null object reference. at Charles3_fla::MainTimeline/onenter()" pops up A LOT in the output. I don't know how to fix it, and would like help. P.S. I am using Adobe CS5 with actionscript 3
[Code]...
I am making a platform game in flash. I have a goal class (the class which contains code for the goal sprite, where when you hit it, it continues to next part of game). Inside the goal constructor, 2 event listeners are added, they are as follows:
addEventListener(Event.ADDED, beginClass);
addEventListener(Event.ENTER_FRAME, eFrame);
The beginClass function is fine, and only runs once, but eFrame is what checks if the player has hit the goal, so it is constantly running. The problem is, once the player hits the goal, eFrame continues to run, while in a menu describing the next scene to the player. My eFrame function is below.
private function eFrame(event:Event):void{
if(hitTestObject(_root.mcMain)){
var lastScore:int = _root.mainScore;
_root.mainScore = lastScore;
while (_root.lvlHolder.numChildren > 0) {
[Code] .....
Frames 2, 3, 4, are frames with just text and a button that display a message to the player, and then the player hits continue. My problem is that eFrame is still trying to be run, but the class has not been instantiated, and the method is causing extreme amounts of lag once the player continues.
I am creating a 2d platform shooting game. Currently I have my main character walking around left and right and the stage background also moves left and right.
The problem I am having is that if I go to far left the charater just walks 'off stage' and into nothingness but the stage still follows. How can I make it so if the character hits a certain point he just 'stops' and cant go left no more but can go right no problem. I have tried using hitTest with another movieclip but couldnt get it working.[code]...
I am creating a platform game and am getting the following error:#1009: Cannot access a property or method of a null object referenceThis error happens when I remove all children from the stage on line 154 of the Robbery.as class. Im guessing that maybe it is still listening for event in the other classes but I'm unsure how to remove these from within the document class.
View 1 RepliesIt's about the "Game Character Dialogues", It is used to instruct the user what to do, like what you see in BookWorm or Diner DAsh.I used dynamic text fields to generate these dialogues,but as I continued doing it. I found myself stuck.I have no idea on how to change the words when the "next" button is clicked. there will be no previous button. but the dialogue will replay when the character is clicked.
View 3 RepliesI have gotten to a point with my platform game where I am completely stuck. I have the player movement working fine but the only thing is, it doesn't fall off the blocks.
I have a Floor class which references the Character class and tells it to stop jumping when it is on a block through a hitTestObject. I have tried to research how other games have added functions but can't seem to find one which will work in mine.
I'm making a platform game. The hero can move around, but the enemies are stationary. My problem is that I want the enemies to face the hero. The first enemy behaves correctly, but the subsequent enemies only behave correctly if I kill all the preceding enemies. I have added the hero and the enemies as Objects and put the enemies into an array called enemies. Both the hero and enemy objects have a direction property and an mc property that refers to their movie clips. This for loop gets called every frame.
for(var i:int = 0; i < enemies.length; i++)
{//face hero
if(hero.mc.x < enemies[i].mc.x) enemies[i].direction = -1;
else if(hero.mc.x > enemies[i].mc.x) enemies[i].direction = 1;
enemies[i].mc.scaleX = enemies[i].direction;}
I am working on a platform game and I am having a problem with the script. I have a mc with my character in it named "mcMain", I placed all the script into it. Inside the movie clip I have 20 frames, the first 5 are standing, walking, jumping, crouching, and crawling. Frames 6-20 are an attacking animation. The problem is in frame 20 I want him to go back to frame one and turn off a variable (called "ram") in the movie clip.
The problem is with the variable ram (which is established in the onClipEvent(load) section of the script). I have it turn on when the character attacks and I want it to turn off after the animation is complete. The problem is it is not turning off. I have it targeted but it does nothing. I have tired both a direct and relevant target along with a _parent.ram = false;
Here is the script on the movie clip.
Actionscript Code:
//Establish VariablesonClipEvent (load) {
var speed:Number = 0;var walk:Number = 6;
var run:Number = 12;var grav:Number = 0;
var falling:Number = 0;
var jumped:Boolean = false;var jumpHeight:Number = 23;
[Code] .....
And here is the script inside the movie clip on frame 20
Actionscript Code:
_root.mcMain.ram = false;gotoAndStop(1);
I'm making a platform game in AS3. I've sorted the left,right and jumping movement of my character - apart from one jumpingproblem:When the up arrow key is down it sets the jump var to true.ENTER_FRAME function detects when jump = true and it decreases thecharacters y position by the var velocity while at the same timedecreasing velocity by 1.5px. So my character jumps up to a certainheight then comes down - There is a hit test to stop heump/fall. BUT when the character falls off a platform he can still jumpwhen the up arrow is pressed. I've been racking my brains but I canstop the character from jumping if its falling.
View 2 RepliesI'm developing a web-based fantasy football game. Most of the game is a straight-forward web application built on top of Linux/Apache/Php/MySQL.
I'm trying to figure out how to implement the draft application. The draft date and time will be scheduled in advance by each league's owner. Up to 32 users may be logged on for a given league's draft, and there is no limit to how many drafts may be happening concurrently. The users will take turns selecting players, and each user's turn will have a time limit. I'd like for all the users to be able to see whose turn it is, how much time that user has left to select a player, who they select, and which players are still available. If there are users in the league who are not logged in during the draft I'd like to be able to detect that and automatically assign players to them rather than waiting for the time to run out on their turn. Ideally I'd also like to have a chat window so the users could chat with one another during the draft.
My background is in desktop application development, so if necessary I could write server code in C#/.NET or Java. As far as I can see these are the options: PHP/AJAX - It seems like it would be possible to have all the state for the draft in the database and have the operations for the draft run in PHP triggered by requests from the clients? I guess in this case the draft doesn't start until at least one user logs in, and it seems like it would be a lot of polling requests to the server if I want everyone notified quickly when a user makes a selection.
[Code]...
make a platform game im a newb in flash
View 4 RepliesI've been searching online now to find a tutorial on how to create a game like thisI don't have a lot of experience with action script I've only used flash for animations. I found 1 tutorial that was useful but it only gave code and text with out a .fla or images. If you could tell me what I need to do to accomplish this and where to put code ect
View 13 RepliesI'm just starting out in actionscript 3.0, and I'm trying to create a basic platform game. Since I don't really have time to code it from A to Z, I'm using an 'engine' I found here. I've made a few modifications (mostly deleting stuff I don't need, such as the enemies and the coins). Now I'd like to create a crate that the player character can pick-up, throw, put down and jump on. I've created a new class (Cage.as) for it, based on the player class. When I run the game, the crate is displayed, but it just floats there. I can't figure how to make it interact with gravity (i.e. fall to the ground).
View 3 Replies