Say I recorded and imported sound files of my voice saying "Two", "Four", "Equals", and "Plus"Would it be possible to have Flash on click string together those sound files like a string so that the user would hear:
View 1 RepliesI have a set of sound clips to be played one after another in a sequence with couple of time interval inbetween. In my case, its a question - followed by the set of four options.
When I write the below code, all the audop files start together at same time. How can I had time delay inbetween, so that the second clip plays only after the first one is over, and the third one starts playing, only when the second option is over.
[Code]...
I am trying to put a few songs on a website, not as an .mp3 player, I just want to be able to assign individual buttons to control them.ow, and it works great. I would like to now how to add more and assign them to their own buttons seperate from the other songs.This is the code I have for one song
var url:String = "";var urlRequest:URLRequest = new URLRequest(url);var sound:Sound = new Sound();sound.load(urlRequest);var sc:SoundChannelvar startTime:uint=0;
playBtn.addEventListener(MouseEvent.CLICK,playF);stopBtn.addEventListener(MouseEvent.CLICK,s
[code]......
The quick question is I can only get this to play sound once - then it won't do it again I am making a math game for my young kids - it adds numbers from 1 to 5 the variables A & B are randomly generated and make C
The sound reads out a string A + plus + B + equals + C (5 sound files)It does this the first time the flash is played, however, when the flash movie goes back to the previous frame, and generates new variables - it will not play the sound files anymore.
[Code]...
I'm having a little issue with the sound on my flash website. The way my site is set up so far is that after the preloader, i have an enter site page that holds there until the user clicks on the "enter site" button. Once they click that button it takes them to the site. I would like to add 2 different sound files to this. One file for the enter site that loops over and over until the user enters the site and then that sound file will stop and the other sound file will start.
When I tried this I could not get the first sound file to quit playing once you enter the site. So basically when I am on the "enter page" it's playing the looping file fine but when I click "enter site" it plays the other audio file on top of the one looping. I hope this makes sense.
I'm trying to pass a random string to multipe swf files using SWFObject 2.0 I'm able to pass the string to one file, but it wont pass to any other object (even if i remove the object that it works on, the string wont pass to the others )
here's the HTML / JS / AS
It only seems to work on mainStage....
ActionScript Code:
package {
import flash.display.*;
import flash.events.*;
[code]....
Is it possible to play multiple sound files using a single sound object? (I've looked into this back when I was using Flash CS3, but I want to know if anything has changed.)
(I'm trying to make a playlist which will play music in the background of my SWF movie and then have a frame where users can change the song and the volume.)
I have a site where as you click links, you move forwards through a city. I want to fade sound files in and out, overlapping, depending on where you are in the city. (The site is [URL]). As yet, I can't have two sounds playing at once. I have found a site with the effect I want, it's at [URL]. (Great site, by the way)
My code is as follows. I have two sound loops at the moment, one of cicadas, one of a city at night, both saved as separate .swf files, which I have loaded onto the main timeline on layers 14 and 15. The code for the two loops is:
cicadas.swf, FRAME 1
var volPercent = 20;
cicadas = new Sound(cicadas);
cicadas.setVolume(volPercent*2);
city.swf, FRAME 1
var volPercent = 20;
city = new Sound(cityMC);
city.setVolume(volPercent*2);
Once I load these two onto different levels, I get no sound. If I delete one, the other will play. I have tried loading the sound objects into empty movie clips, but then the entire file has to load before it will start playing. I need a way to stream multiple sound files, and have control over their volume.
I am working on a simple game for kids. The game revolves around the alphabet and it is all voiced. So I have a good number of sound files that I need to call on at any given moment.In AS2 I would just link all of the sound files to variables at run-time and have them ready to play when the interaction dictated it.... with the way "linkage" has changed in AS3... I feel like it would be a bad idea to have over 50 different class files (one for each sound file) so I am looking for a cleaner solution... that and I am guessing that having redundant class files misses the point.I haven't had much luck finding a forum post or tutorial that talks directly about this type of issue but the idea is a little foreign right now so I am sure I have stared directly into the gold mine and not noticed. I am very interested any thoughts or links on the subject.
View 1 RepliesI've created a small application that links various Sound Clips to corresponding Sound variables, and the individual start and stop commands work fine. However, when I try altering the volume, the controls affect all the sounds in the movie. I'd like to refrain from creating separate SWF files to represent each sound, but I will if I have to.
View 1 RepliesIn Actionscript and Adobe Flex, I'm using a pattern and regexp (with the global flag) with the string.match method and it works how I'd like except when the match returns multiple occurrences of the same word in the text. In that case, all the matches for that word point only to the index for the first occurrence of that word. For example, if the text is "cat dog cat cat cow" and the pattern is a search for cat*, the match method returns an array of three occurrences of "cat", however, they all point to only the index of the first occurrence of cat when i use indexOf on a loop through the array. I'm assuming this is just how the string.match method is. I want to find the specific indices of every occurrence of a match, even if it is of a word that was already previously matched.
how the string.match method is and if so
I'm using a pattern and regexp (with the global flag) with the string.match method and it works how I'd like except when the match returns multiple occurrences of the same word in the text. In that case, all the matches for that word point only to the index for the first occurrence of that word. For example, if the text is "cat dog cat cat cow" and the pattern is a search for cat*, the match method returns an array of three occurrences of "cat", however, they all point to only the index of the first occurrence of cat when i use indexOf on a loop through the array. I'm assuming this is just how the string.match method is (although please let me know if i'm doing something wrong or missing something!). I want to find the specific indices of every occurrence of a match, even if it is of a word that was already previously matched.
View 1 RepliesI'm using a pattern and regexp (with the global flag) with the string.match method and it works how I'd like except when the match returns multiple occurrences of the same word in the text. In that case, all the matches for that word point only to the index for the first occurrence of that word. For example, if the text is "cat dog cat cat cow" and the pattern is a search for cat*, the match method returns an array of three occurrences of "cat", however, they all point to only the index of the first occurrence of cat when i use indexOf on a loop through the array. I'm assuming this is just how the string.match method is. I want to find the specific indices of every occurrence of a match, even if it is of a word that was already previously matched.
how the string.match method works and if so
I am making a pretty basic flash game using AS3, its a 'fill in the blank' type. I think I basically have this code figured out, but I think I need a string variable for the 'word' part, but I've never coded that before, so I was looking for some guidance on that topic. Here is the code I have right now[code]...
View 3 RepliesI have a for loop generating a string that needed to be executed as code.
var new_content_string:String = content_string.slice( 0, -1 ); // After generating my string, I slice the last letter.content_txt.htmlText = HERE // Here is the place I want to execute my string
is there a way to execute code that is stored in a string?(i guess the operation would look something like this)
var myCode:String = "{trace('Hello');trace('World')}";
var myFunction = myCode as Function;
myFunction();
[code].....
i think u can do it via XML and the CustomFunctions methods in flash... but id rather do it all in flash if possible. what i want to do is to treat a string as a line of code.
Code:
actV="trace('Red')"
someButton.onPress=function(){
actV.toCode()
}
I need to evalueate a string as code... let me show you an example...Lets say, that I have a string:
Code:
string = "Math.cos(var1)*Math.sin(var2)";
And what I need to do, it to use its contents as code and not string like here:
Code:
var3 = Math.cos(var1)*Math.sin(var2);
Basically, I would like to expose the interface of some Flash code via a textField. I can easily tokenize the string and get the method name and use eval to call the method. I am having trouble collecting the parameters and handing them to the method.[code]...
View 1 RepliesSince Action Script is an interpreted language, and it is clear by decompiling animations that the code is still in there, is there any function that lists the code of a function or class as a string?asically, I want to create a suite of components for developers that lets them make modifications to or at least view the code behind a component while the animation is running, and that way make it easier to find bugs, instead of having to stop the animation, dig up the code for that class, and recompile it. It would be even handier if it was possible to edit code while the code was running, so the next time Flash encounters that code, it will instead run the new code. Yes, if used unwisely, that could cause a lot of problems, but the benefit outweighs the risk, and that feature is used in such development environments such as Visual Studio.
Likely, the only solution to that would be to give each class a "code" variable, likely a String. Then when the users click the button to view that certain source, it checks for the "code" variable and displays the contents. The problem is that you have to remember to update the variable each and every time Perhaps I can write an extension for FlashDevelop that does that automatically? It could just update that variable at compile time.
I'm trying to create a series of scripts that will create some custom event listeners. I have three movie clips on my stage. One is a movieclip who's sole function is to hold array's and the event listeners. A second which moves around the screen. And a third that is motionless.
The problem is that the argument I want to test (which activates the custom event) is held within a string.
What I want to know is, how do you test to see if the string argument is true?
Is it something similar to this:
[Code]...
I think I'm going about this in the wrong manner, however this is the only way I can think of this working (since I need to be able to dynamically create these events)
i think u can do it via XML and the CustomFunctions methods in flash... but id rather do it all in flash if possible.what i want to do is to treat a string as a line of code. eg.
Code:
actV="trace('Red')"
someButton.onPress=function(){
[code].....
I want to play a sound either external (preferably) or internal but the name of the sound needs to match my target element which is in an array. I have been able to get the target.name and assigned it to a var mySoundName:String but I can not access the sound, I have posted my code and the 2 codes for internal and external load sound that I have..
Code:
import flash.events.Event;
import flash.display.MovieClip;
import flash.display.DisplayObject;
[code]....
I am trying to write some actionscript 3 code to play short sounds from the library, using a dynamically created string to load it. In AS2, I could do something like this:
mySound = new Sound();
mySound.attachSound("any concatenated string" + foo);
In AS3 however, the identifier is a class whose name, it seems, must be already known. Is there a simple way to 'attach' a sound using the identifier as a string in actionscript 3?
I want the code for when a sound finishes playing. Example: when I click to make a sniper sound go off, I want it to have a script that wont let you play the sound again until the sound is finished playing.
View 4 Repliesi've read a tutorial about passing variables to HTML. But this tutorial isnt clear for me.. [URL] EXAMPLE 1 Using Query String to Maximize Code Reuse I really dont have an idea what to do inside flash, bec the author only said: Quote: Assuming the image filename is image1.jpg, located at a folder named images. And assuming that the Flash movie will use a variable named imageFilename to refer to the file, then we can do this
How do I do that? Like having a empty movie clip and giving an instance name of imageFilename?
I have converted Actionscript to Javascript. There are 5 functions with the same code.Everything must become a string in order to replace the code from the function1().
function2() { function1.toString().slice(function1.toString().indexOf("if"), function1.toString().lastIndexOf("}")).split("[0]").join("[1]");
}
In Actioncript, we can use this[my_string] to convert string back to byteArray or something like that Javascript must surely have a method to convert string back to code right.
I have swf that loads xml from a folder. I want to copy that XML string and hard code it into flash as an entire string. Then dim my xml object equal to that string. Is this possible? Reasoning is because I don't want people duplicating the swf and chaning the xml to create a whole new object. I don't want to have to manualy enter each question and answer and value into the arrays. That's to time consuming.
AS2 code to load the XML:
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = "<myxml>My XML STRING HARD CODED HERE?</myxml>";
var questionXML:Array = new Array();
function loadXML(loaded) {
[Code] .....
Can any one tell me the how do we come to know when the code is written for number its taking as a string.
View 3 Replies[URL]Using Query String to Maximize Code Reuse Assuming the image filename is image1.jpg, located at a folder named images. And assuming that the Flash movie will use a variable named imageFilename to refer to the file, then we can do this How do I do that? Like having a empty movie clip and giving an instance name of imageFilename?
View 1 Replies