ActionScript 3.0 :: Prevent A Button From Playing A Sound Overlaped?

May 1, 2010

I have a Button named "Bt1P" that when I click on it, the Sound "S1.mp3" begin to play.

[Code]...

My question is, what is the right code to tell this Button not to repeatedly play "S1.mp3" while it is already Playing!because when i click it for the 2nd and 3rd time, the file overlaped, and 3 same sounds play together at once.

View 3 Replies


Similar Posts:


Actionscript 3.0 :: If Press Play Button While The Sound Is Already Playing It Has The Same Song Playing In The Background

Nov 13, 2010

I have a sound clip that I'm loading externally into my flash file. The code I'm using looks like this and is placed in the as layer on the first frame,

var mySound:Sound = new Sound();
var myChannel:SoundChannel = new SoundChannel();
var myTransform = new SoundTransform();
var lastPosition:Number = 0;
mySound.load(new URLRequest("introaudio.mp3"));
myChannel = mySound.play();
[Code]....

View 14 Replies

Stop The Playing Sound And Start Playing The Button?

Oct 3, 2009

So I made a few buttons with sounds within them and when I publish it they work just fine. But what I want them to do is;

Say I click a Button.The sound starts playing.Then I click it again, before the sounds done playing.I want it to stop the playing sound and start playing the button I just clicked on, whether it be the same button, or a different one.Right now it just ends up sounds like an echo because it'll play it as many times as you click it.

View 2 Replies

Movie With Button On Stage - No Sound Playing?

Oct 17, 2010

I have 1.mp3 beside my .fla file and when I tried to run a movie test, it doesn't play any sounds. Only the stage has a glitch was it keep loop frame 1 and 2.
var mySoundReq:URLRequest = new URLRequest("1.mp3");
var mySound:Sound = new Sound();
mySound.load(mySoundReq);
mySound.addEventListener(Event.COMPLETE, playSong);
function playSong(event:Event):void {
mySound.play();
}
My test Movie with button on stage: [URL]

View 1 Replies

ActionScript 3.0 :: Creating Button To Stop Playing Sound?

Dec 11, 2009

I'm trying to make a stop button to make it stop playing the sound. But I get an error saying:
TypeError: Error #1006: stop is not a function.
at sound/SoundStop()

Here is the function for my stop button:
function SoundStop(event:MouseEvent):void {
cs.stop();
isPlaying:false
}

View 5 Replies

Professional :: Stopping Sound Playing On Button Click?

May 3, 2010

I found this code to play sound:

myButton_btn.addEventListener(MouseEvent.CLICK, buttonIsClicked); [code]....

I got it working fine, but was wondering how to program a function for another button to stop stop playing that sound?I tried a function with snd.stop(); but that seems to be incorrect.

View 6 Replies

ActionScript 2.0 :: Attaching & Playing A Sound To A Button On Rollover?

May 23, 2007

i can in AS 1.0 attach a sound and play it on rollover fine...

Pretty much i have a button when you roll over it plays a sound thats it...very simple....i also know i can do it on the keyframes but i was hoping to do it dynamically as my site is completely created using AS barely no keyframes and i do not wish to start...

View 2 Replies

ActionScript 1/2 :: Stop Other Sounds From Playing While Current Sound Is Playing?

Apr 10, 2011

I am creating a game that has 6 movieclips all on the main time line of the game. Each movie clip has three buttons that when clicked plays, pauses or stops a sound clip.When I press any of the sound clip play buttons that sound starts playing, the problem is when I click any of the other sound clip play buttons those sounds also start to play. Is there a way I can disable the other sound clip buttons while the current sound is playing then enable all of the buttons when the current sound has stopped.
 
This is the code that creates one of the sound objects

[Code]...

View 3 Replies

Flash :: Prevent Video From Playing Automatically?

Jan 2, 2010

I know extremely little about Flash, and have been sent a completed SWF file, which I have inserted into my webpage with the code below.The problem is that it starts playing automatically. Is there some way that I can add a parameter to the code below so that the video doesn't start automatically, or will the SWF file need to be re-created?

[Code]...

View 1 Replies

ActionScript 3.0 :: Prevent Video From Playing At Beginning Of Swf?

Apr 11, 2011

I have a small game that plays a short instruction video and then has the player select a button which then takes them to the next level. The game has 4 levels with video. The problem is that when the swf plays all the video plays at the same time. When you get to the level you can play the play button on the skin and the video will play again and the level functions appropriately. How can I get the videos to only play when the play button on the skin is clicked? [code]...

View 2 Replies

ActionScript 2.0 :: MP3 Player - How To Prevent Auto Playing

Feb 19, 2010

So I did the tutorial and it works fantastically. However I don't want it to auto start and obviously it does, I thought if I took out playSong(); it would cease the autoplay but that doesn't work, and I took out playSong();} and that made the whole thing stop working, so what I'm wondering is how do I keep the mp3 player from auto playing, and also the variables in the tutorial were url, artist & track. What would be the proper procedure to add a 4th variable ?

Code:
Select all// Setup sound object
var s:Sound = new Sound();
s.onSoundComplete = playSong;
s.setVolume(75);
// Array of songs
var sa:Array = new Array();
// Currently playing song
var cps:Number = -1;
[Code] .....

View 4 Replies

Flash :: Movie Clip Contains Just One Frame - Prevent From Playing

Mar 24, 2010

I'm a newbie at Flash, so started playing with a pretty standard code sample: one layer contains a movie clip with a flying rectangle, another layer has a button to control it. All script code is in Main.as file. The rectangle was named square1 through the Property window. Here is the problem: the constructor for Main has a line: square1.stop(); to prevent clip from playing, but it doesn't help - it plays. I know the constructor fires, because it has trace("stuff") in it. The code does check that the stage has been created.

What strange is that square1.currentFrame always returns 1, and square1.totalFrames returns 1 as well. The layer has 24 frames on the timeline. I tried a tween with just 2 keyframes, then converted whole tween into frames - same result. I mean, the thing is flying before my eyes, how can it be 1 frame???

I even added a listener: square1.addEventListener(Event.ENTER_FRAME, onFrameChange); The event fires all the time, i.e. the frames change, but currentFrame is still 1. Also, tried to name individual frames and use square1.gotoAndStop("begin") and stuff like that. I am really stuck with this stupid problem.

View 1 Replies

Flash :: Playing Sound From Data Acquired From Sound.extract()?

Aug 1, 2011

I'm trying to play a sound using a technique found here (play the sound by sampling raw sound data gathered from the original with extract()), with the difference that the mp3 sound is embedded in the swf, not loaded externally. This is my code:

var soundBytes:ByteArray = new ByteArray();
var mp3sound:Sound = Sound(new Sound1_design()); // this is the embedded sound
mp3sound.extract(soundBytes, int.MAX_VALUE);

[Code]....

This works, in a way, except that the resulting sound is distorted (it has a kind of a metallic ring).

View 1 Replies

ActionScript 2.0 :: [FMX] LoadSound - Sound To Keep Playing While The Rollovers Load Sound

Jun 22, 2003

I am loading small sounds dynamically with the loadSound command. These small sounds are activated with a rollover. see script below. This works ok. however. i want the first sound to keep playing while the rollovers load sound. a bit like playing the piano. This works ok when i import all the sounds into the library and place them on their very own button. however the size of the flash movie increases to 140k. whereas when i load them dynamically the size of the movie is 20k. obviously i want to load dynamically.

But with dynamic loading each sound stops when another sound is rolled over, so that there is only ever one sound playing at once. I need to load the sound into a different level or something, so that the first sound can keep going while the smaller, shorter sounds play over the top. this is my script below. The first sound loads when the movie starts. This is the one i want to keep playing. Then there are the smaller ones with rollovers. does this make any sense? there's actually 13 little sounds.

[Code]...

View 3 Replies

Professional :: Stop A Sound From Playing If It Is Playing Already

Dec 6, 2011

ok so i have a button that plays an animation for fire when held down. and when realsed goes to and stops and frame one. when it reaches the end of the time line it goes to and plays at frame 10 and goes back to the end of the timeline. I have a sound for the fire animation that plays for the effect. The problem is the sound keeps going untill its over even if the button isnt held down. and when the playhead reaches the end of the timeline it goes to and plays and frame 10 and it replays the sound. if i hold it down it will just keep playing the sound over and over from start to finish. what i want it to do it when i hold the button down i want it to play the sound and when released it stops the sound where ever it is at. I also dont the sound to play again if there is a sound already going to stop it from playing 20 sounds at one time it gets loud and you need asprin after about 5 seconds of that.

View 2 Replies

ActionScript 3.0 :: Assign A Sound To A Soundchannel Without Playing The Sound?

May 4, 2011

The thing I don't understand is how to assign a sound to a soundchannel without playing the sound. All the examples I've seen do this.

Code:
_SoundChannel = _sound.play();
_SoundChannel.stop();

And how can I set a SoundChannel volume to zero before allocating a sound to it?

View 2 Replies

CS3 Sound Control - No Sound Playing?

Apr 16, 2010

I am trying to embed some sound controls, and have hit a dead end. I made my play and stop buttons, imported my mp3,, assigned it proper linkage, and inserted this AS2 :

[Code]...

The buttons are named "play_btn" and "stop_btn" respectively. When I export it or preview it, hitting the play button does not do anything.... I hear no sound. What could be up with this?

View 4 Replies

Sound Playing Too Soon?

Sep 2, 2010

Im making an animation and in the 3rd scene i have a deer that screams and the sound plays way to early. I had to drag it out way past the frame where it opens its mouth for it to play at the right time.

I have no idea whats wrong this has happened before. I really dont want to have to guess on where to put the sound for everything a character says.

View 2 Replies

Sound Not Playing On Mac?

Sep 21, 2009

Back to my nightmare project, I've embedded sounds in the project that play based on certain user actions. They play fine for me (PC), but my customer is telling me they don't work for her (Mac).Would there be ANY reason a sound would play on a PC but not a Mac?I've told her to update her Flash player to make sure it's current and to make sure her speakers are on and the volume is up, but no sound.Okay, the REAL reason this isn't working is user error based on everything else I'm told that's happening and not happening, but I need to cover my bases and see if there really may be a reason sounds won't play on a Mac.

View 3 Replies

Professional :: Button Over Sound Plays Again Before Button Down Sound

Apr 15, 2010

I've assigned a sound to the button over frame and a different one to the button down frame. When i over over the button the button over sound plays. When I then click the button, the button over sound plays AND the the sound I put in the button down frame plays.

View 8 Replies

HitTest Was Playing The Sound Over And Over?

May 20, 2009

I have a playhead that moves across the screen and when it hitTests a movie clip it plays a sound. all is working fine except that it will only work the first time it is played. The playhead is controlled by a button. I am working in Actionscrpt2. Here is the code on the movieclip:

onClipEvent(enterFrame)[code]....

In the begining I was having trouble because the hitTest was playing the sound over and over but the above code sorted that out. I think that the new problem was created by fixing the old one.

View 7 Replies

ActionScript 2.0 :: Sound Playing Only ONCE

Nov 13, 2009

I want to achieve the effect of a computer startup. IE, it only plays -once- and then doesn't play again for the rest of the time, even if the user comes back to the same menu. How do I get Flash working that way? I've tried variables to no effect... it doesn't want to change the variable condition.

[Code]...

View 1 Replies

ActionScript 3.0 :: Sound Is Not Playing

Aug 2, 2010

I have another one to get off my chest.I am basically doing a spinning wheel game - i want the sound to play each time the Stopper hits a new prize section of the wheel.In my code, from my EnterFrame function, i call my playSound function but the sound file just never plays .. i know the function is being called as i can see it in trace.I suspect that because the EnterFrame is constantly being called, that the sound file - because it has determined it won't complete - it ignores it totally.[code]

View 2 Replies

ActionScript 2.0 :: Playing The Same Sound Over And Over?

Oct 10, 2006

Anyone know why this keeps playing the same sound over and over?

If I call it using:
Code:
var sounds:src.snd.SoundManager = new src.snd.SoundManager(); // This isn't how I do it, but ... you understand.
sounds.queueSound('libsound1');

[Code]...

View 1 Replies

IDE :: Sound On The Timeline Not Playing?

Aug 26, 2010

I have a small sound effect (less than 10KB) I have placed on my timeline. When I test it directly in flash, I can hear the sound effect, but when I CTRL + test my movie, I can't hear the effect?

View 1 Replies

ActionScript 1/2 :: Make Button On Rollover Starts Sound And Rolloff Stops Sound?

Jul 28, 2009

I have several buttons in a movie and I want to be able to rollover an individual button and play the sound for that button and when I rolloff I want the sound for that button to stop.

View 6 Replies

ActionScript 2.0 :: Add Mute Sound And Unmute Sound Script In A Single Button?

Sep 21, 2011

how to add mute sound and unmute sound script in a single button?

View 2 Replies

ActionScript 3.0 :: Stop Button Sound But Not Main Background Sound?

Aug 5, 2010

I have a bit of a problem with sound.. I have a main container animation with background sound that's loaded with soundChannel..I also have an externally loaded SWFs with Movie Clip buttons that have a sound ON ROLLOVER on the timeline..after rolling off - I place the:SoundMixer.stopAll();to stop the button from playing the sound once the mouse is rolled off.. However, the problem I'm running into is that it also stops the sound of the main container movie cli

View 1 Replies

Prevent Enter Key From Working As A Play Button?

Jun 25, 2010

I would like to disable the enter key from working as a play button for Flash 8 or Flash in general.

View 1 Replies

ActionScript 3.0 :: Stop Sound Before Playing The Next?

Mar 4, 2010

I have several buttons on the stage, each one will play an external sound file when clicked. If the user has clicked say button_1 and then clicks button_2, I need to stop the sound currently being played, before starting the sound from button_2

This is my code:

import flash.media.Sound;
import flash.media.SoundChannel;
import flash.net.URLRequest;
import flash.events.Event;

[code]....

So... how can I stop the sound currently being played, when the user clicks on the next button...

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved