ActionScript 3.0 :: Remove 'Adobe Flash Player Settings' From Code?
Nov 16, 2009
I've put together this interactive swf file which contains this code
var myMic:Microphone = Microphone.getMicrophone();
myMic = Microphone.getMicrophone();
Security.showSettings();[code]....
however, the Adobe Flash Player Settings box keeps appearing when I export the file to view the movie. When you try closing it however the movie doesn't react to sound. I've tried taking out pieces of code to see which is calling the box up but it wither stays up or the movie doesn't function properly.
View 5 Replies
Similar Posts:
Mar 22, 2011
I am unable to click on "Allow" button in my Adobe Flash Player Settings panel that pop's up because half of it is hidden behind divs making it "unclickable".I tried setting negative z-indices on the divs that are overlaying it and I also tried giving a prositive z-index to the div holding the Flash Player Settings panel
View 2 Replies
Jul 1, 2007
I'm pretty new to Action script and I have a problem here that I can't seem to figure out.
I have this Action Script Code which is attached to a simple movieclip, and it all works IF the general settings are set for Flash Player 6.
It does not work for Flash Player 7 or above, which is probably because this is Actions Script 1 Code...
I attached the .fla file and also here's the code:
[Code]...
View 2 Replies
Jan 18, 2011
We run surf camera streams on our website, which are played via the latest version (5.4) of JWPlayer on our pages. Recently we switched over to another streaming service, and H.264 streams, as we are planning on streaming out to iOS devices in the very near future, however this introduced a bug on the client side where users to not receive vision (they only see a black screen where the video is normally seen).
We have discovered that disabling the Hardware Acceleration (which was introduced in Flash Player 10.1+) fixes this issue, and given the spectrum of environments where this issues is happening I would wager that this is related to specific graphics cards, their drivers, and how they handle the vision decoding etc.
The documentation we have found relating to disabling Hardware Acceleration only indicate that this can be done via the wmode param, i.e. by setting it to wmode="opaque" or wmode="transparent" however this doesn't seem to work in all cases (for the most part the issue is no longer there) however we are still seeing 30% of our users getting this issue.
We can ask the users to disable hardware acceleration themselves, and we have provided details on how to do this, however to me that is only a temporary fix, and I was curious as to whether or not there was something more permanent we can put in until Adobe fix up this issue?
View 1 Replies
Sep 5, 2011
I want to modify windows proxy settings in adobe air. Below is my code. It doesn't work.What's wrong with it?
[Code]...
View 2 Replies
Mar 22, 2012
I am using twilo client in one of my apps and it is showing following popup when I click on call buttonBut I want to show the following pop up which is lot simpler and seems less cumbersomeIs there a way to control which pop up comes on the screen? I have read some documentation of adobe but their configuration files live in users computer which ofcourse can not be changed by a website.
View 1 Replies
Jun 25, 2010
Yes correct I'm talking about Flash Player 11, thats what it says in Flash CS5 software. Whatever I do in Publish Setting, Flash software always returns option to be Flash Player 11, I don't get this. I choose Flash Player 8 and AS 2.0 and re-open Publish Settings it is again back on Flash Player 11 and AS 3.0.
First screenshot
Second screenshot
View 2 Replies
Jan 9, 2011
I asked Google. But there is no working answer for it. I checked "right click -> global setings" and found no proxy setting in [URL].. Can anyone know how to configure proxy settings for flash player?
View 1 Replies
Nov 28, 2010
I'm creating a banner that is supposed to send an user to a Web site. I have the following as my AS3 code (in a separate layer)[code]...
How do I get to this "settings manager"? I'm using Windows 7 Professional.
View 1 Replies
Nov 11, 2011
I am on mac and haven't upgraded my OS from 10.5 to 10.6 so when I upload a file creted in Flash CS5 it won't play because it needs the Latest flash player which uses 10.6 OS.So what I'm getting to is that can I go into "publish" settings and change the Flash player from 10.2 to an older version and then will this work.Also, which version should I change it to? For example sould I select Flash Player 5, 6, 7, 8, 9, 10 or 10.1?
View 3 Replies
Jun 17, 2010
The following script works fine in a file that I created:
Code:
import flash.external.ExternalInterface;
refresh_btn.addEventListener("click", pageRefresh);
function pageRefresh(eventObj:Object):Void {
[Code]....
However, the same script in another file that I have doesn't work! There's no alert and no refresh. I tried setting allowscriptaccess to always and that didn't work. I tried changing the publish settings to Flash Player 10, that didn't work.
View 4 Replies
Mar 22, 2010
I use a laptop which is never connected to the web for customer demos away from base. It does not have the Flash authoring environment installed either. Furthermore, a customer's own system used to run development versions of web sites using HTML with Flash content is not guaranteed to have web access either. Because some of the associated FLV files are quite large, uploading to a web host for such testing is not really viable even where clients have web access at meetings.
I have an AS3-based project which triggers Flash 10 local security protection on systems other those that used for authoring, for which the workaround is to set the source folder as trusted using the Flash Player Settings Manager. but [URL] doesn't seem to offer a useful way to avoid this problem without going on line to the Flash Player Settings Manager via an Adobe web site.
[Code]....
View 12 Replies
Aug 31, 2011
Is it possible to modify browser proxy settings with flex/actionscript/air?
View 1 Replies
Apr 29, 2010
I have a slight problem when publishing to Flash Player 7 but works perfectly in Flash Player 6, below is the code:[code]In short this creates a list where the values are kept in SharedObject.I need to use a WebService so I require Flash Player 7, as I said this works as expected in Flash Player 6, so maybe someone may know a pitfall or two when migrating code form 6 to 7?
View 1 Replies
Jul 8, 2009
I have a problem understanding the bitrate settings when trying to encode an FLV for Flash 8 or higher, using two passes. When you choose to use two passes, you are presented with a bunch of different options, including "Minimum Bitrate [%target]", "Maximum Bitrate [%target]", and "Bitrate Variability [%target]". These are not really explained properly in the online manuals I've seen out there. Let's say you want to have a Costant bitrate (CBR) of 900 kbps, and you want to have two encoding passes, what do you set the other sliders to?
The defaults are:
Minimum Bitrate [%target] 80
Maximum Bitrate [%target] 120
Bitrate Variability [%target] 80
View 8 Replies
Feb 8, 2011
I'm on a macbook pro, osx 10.6, using CS4 Web Premium. I used to have an external monitor hooked up which had much higher resolution, so when using Adobe Media Encoder I'd click the Settings button on a video to get the Export Settings window, then stretched the Export Settings window to be the size of my external monitor. Now, I'm just using my laptop, and the export settings window does not have the resize buttons at top left to adjust it back to the size of my laptop, and the bottom third of the export settings window is getting cut off so I can't see the cancel/ok buttons etc.
I've tried re-installing media encoder (via reinstalling flash using the CDs) to try to 'reset' the window sizes, didn't fix the problem. If anyone knows of any other preferences or something I could delete to fix this,
View 14 Replies
Mar 13, 2011
I need my flash movie to have access to the microphone, but it is refusing to display the confirmation dialog and the "Settings" context menu item is disabled. The document size is adequate to display the dialog, though. The catch, though, this is only occurring when the SWF is run in the local player. If I run the SWF in a browser, it asks properly and the settings menu is available.
View 2 Replies
Mar 16, 2009
I would like to know how the following ActionScript, that only works in Flash Player 6, can be updated to work in a Flash Player 10 file.[URL]As it says, "On Publish Settings set Flash Player version on Flash Player 6, or this movie will not work."It works fine published as FP6 but not as FP10 as I need it to be. This AS is added to a movie symbol that contains a button for a rotating menu effect.
onClipEvent (load) {
hx = 300/2;
hy = 400/2;
r = 100;
[code]....
View 3 Replies
May 24, 2009
I'm just getitng started learning Flash CS4(fully updated). I was going through the Flash Downunder tutorials, and creating an interactive player with slider bars to change the 3D X and Y rotation.[code]I get no compile errors (using ActionScript 3.0, BTW) But when testing out the video with Flash PLayer 10 In the publishing settings, the video shows up blank. I thought it may be an issue with windows, but when trying the SWF on a WinXP machine, the same issue occurs.I tried using Flash player 9 in publish settings, and the video plays, but I need to use player 10 to use 3d rotation settings.I'm not sure if this is just a bug with Player 10, or if I'm doing something wrong.
View 11 Replies
Mar 26, 2007
I made a 'whiteboard' app. Originally it was for Flash Player 7 then I changed the Publish Settings to point to Flash Player 8. Worked fine for me, but caused problems with my customer, so I changed Publish Settings back to Player 7. When the customer opened up the .swf which I'd emailed him, it opened in Flash Player 6, even though he had the latest player installed. When he deleted the old V6 player the problem was fixed. So my question is, why did my .swf open Flash Player 6 - and therefore lose some of it's functionality - when the customer had a later player installed?
View 2 Replies
Nov 6, 2010
I'm working in a flash template (like this one [URL] and I would like add a HTML code. Could I ? If I can, where insert him?
View 7 Replies
Dec 4, 2009
I am building a photography web site with flash and I found a really cool slide show extension plug in (www.slideshowpro.com) were can easily upload and update my portfolio slide shows.when I publish out to HTML, I test it in a browser and I get this warning when I click on the photography page.I read in adoby help and it said flash developers can allow communication between sites with this AS code Security. allowInsecure Domain ("nathan44. slideshowpro.com");so I added this code to my actions layer on the firs frame in "scene 1" and to the actions layer in the photography section. But nothing changed i still get this warning when ever I publish out to an HTML, when I just preview with control + enter i can view the sideshows fine.
View 4 Replies
Jan 13, 2008
Does Adobe offer a flash stand-alone player that does not require a browser to play swf files ?
View 1 Replies
Nov 10, 2010
I make an iPhone app with Flash and it generates my app and a xml (that I don't understand if is it useful).My question is if I can read the objective-c code that Flash generates.
View 2 Replies
Jun 2, 2011
I have C++ application that use OpenGL. Need to convert this app to flash app. Is it possible to do this with Adobe Alchemy? Is it will be possible to get from that swc current image (for example, with glDrawPixels) and print it on screen
View 2 Replies
Jan 31, 2010
I try to show a Flash-10 animation in DW CS4 and I get the messageVoor het weergeven van de inhoud op deze pagina is een nieuwe versie van Adobe Flash Player vereist.In English: for representing the content of this page you need the new version of Adobe Flash Player. I download the new version (two times: In IE 8 and Firefox) and I still get the same message. How come? When I try-out in Flash everything is OK and the HTML-page is also OK in every browser there is.
View 8 Replies
Feb 23, 2010
I've created a flash animation (the backgroung is moving horizontally and vertically according to the movement of the mouse), the problem is that when I open my SWF file in Adobe Flash Player 10.0 the whole animation is shaking. (In Adobe Flash in preview mode it looks fine)
View 2 Replies
Mar 20, 2010
I cannot get certain game I play under Yahoo. It called "FamilyVill - facebook by Mozilla Firefox.It says, I need to upgrade the Flash Player.I was unable using my Flash Player I had. So,
View 4 Replies
May 5, 2010
What happens to Adobe Flash Player(not the plugin) when the 30 day trial expires? I've made a swf and I want to use it on another computer for a show. Will I have to buy a whole new flash or will the flash player still function even though the 30 day trial expires?
View 2 Replies
Mar 11, 2011
Each time I try to play a video or audio, I receive a message that tells me to download the Flash player in order to watch/listen.I want to use Windows Media Player for these purposes. What gives?Does anyone know how I can get around this problem?I have just reformatted my hard drive, re-installe d the O/S and Windows 7.I never had the se messages pop-up before my pc crashed; now they are ubiquitous.I attempted to wor k it out with a customer service rep via text/chat, to no avail.He said I would have to use email from another section to get the situation fixed.Bottom line: I do not want to use Adobe Flash player on my 64-bit pc.
View 1 Replies
