Currently I have two layers with a set of movieclips in each layer. I only have actions in one of the layers. This is an abbreviation of the code:
[Code]...
Should i move the showmary function into the layer with the mbelly movieclip? Is there anything else I'm missing?
I have a container MovieClip called Drags where I can drag stamps (other MovieClips)--they are added to the Drags container via addChild. I have a second container MovieClip above that one (display order-wise) call Paint that contains a bmp, and some sprites used for adding a layer of paint.
My question is this: I need to be able to click on the Paint layer when I am above a draggable MovieClip and trigger the MouseEvent for the correct object to drag it around, but the item must always remain below the Paint layer.
Is it possible to add layers, re-order layers, move movieclips from layer to layer or specify which layer a duplicate movieclip appears on at runtime with AS3?I am aware of the depth properties and the functions associated with that but it would be easier to have a concept of a layer because I am dealing with masks.I have a nasty feeling I'm gonna be told that layers don't really exist within an swf and that depths and setmask are all there is to work with.
View 4 RepliesA simple question I'm sure but its been driving me slightly mad.I have created a program where a movieclip is affected by sliders which affect its size and blur etc.Problem is, I want to use the same sliders to effect a different movieclip when a button is pressed, switching the movieclip so to speak.I thought about switching to another frame in the main timeline but the code is still there which means they are still affecting the same movieclip.I also thought that if i could get the code to affect a single layer then I could direct my code towards that layer so anything on it would be affected independently.
View 1 RepliesDon't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 Repliescan i change the depths of two movieclips on the same layer with swapdepths? like...
mc1.swapDepths(mc2 + 1);
it's not working for me. So i figure you can't do it with two mc's on the same layer...
Is it completely impossible to put movieclips and sprites underneath the 3D layer?Eg, you can't load a swf with 3D content and show it on top?
View 7 RepliesI am doing some research on creating clcikTags. I read a few places that the clcikTag should be on the top layer. That has been fine, but now I want to loop it and I usually put my actions in the top layer. Will this cause a problem? Am I better off just putting my loop action on the last key frame of the clcikTag layer?
View 3 RepliesIm creating a program that is designed to allow the used to select 3 pictures (movie clips) and print them off on a single peace of paper.
The program works by allowing the user to select 3 graphics (the graphics are actually instructions for various exercises) and then moving the desired movieclips onto the stage. This all happens on a layer named "Content"
So far the program will allow the user to select the movieclips and will move them into place on the Content layer as well as move smaller versions of the pictures into a preview box the only thing it does not do is print. (the most important bit)
Is it possible to create multiple layer masks over a single layer using Actionscript3?Below is the flash effect I wanted to create with masks.First it starts from A and goes to B and C simultaneously.Then from B it goes to H and D simultaneously (the same applies to C).This is how the end result will look like.ps. I need my background to be transparent. I'm embedding it into a web page later.
View 2 RepliesI can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 RepliesI want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
View 3 RepliesI'm trying to do a little comic comedy type video in Flash. I've done an outline sketch with the pen tool of my first character, now I want to color it BUT I want to keep the colors and the outline sketch separated on two different layers. Is there a way I can select the path (outline) on layer A and then colorize it with the bucket tool on layer B? The problem I'm having is that every object I select it automatically jumps to that corresponding layer.
One reason why I want to do it this way is I still want to continue working freely on the outline sketch since it's not fully finished, so that I just can blend the colors out and keep working on the outline, at the same time I want to color it while I go just to see where it's going and to make sure that I'm not wasting my time unnecessarily with trying to do a outline just to find out that it won't work out at the end.
how to do a comic type animation, how to create the characters, how to make them move and talk? It can be a free or paid resource.
Why this code doesn`t work?
tip_052.addEventListener(MouseEvent.MOUSE_OVER,ove rSub);function overSub(evtObj:MouseEvent) {
tip_052.visible = true;
else[code]....
appear this error "Scene 1, Layer 'Layer 3', Frame 1, Line 291083: Syntax error: else is unexpected.
this is the END of the code:
this.createEmptyMovieClip("pos", total);
pos.moveTo(radius.b, 0);
pos.beginGradientFill("radial", [0xCCCCCC, 0x999999], [100, 100], [0, 255], {matrixType:"box", x:-radius.b-radius.b/2, y:-radius.b-radius.b/2, w:radius.b*2, h:radius.b*2, r:0});
for (var radians = 0; radians
I get a error for the last line. The error is this:
**Error** Scene=Scene 1, layer=Layer 1, frame=1:Line 11: ';' expected
for (var radians = 0; radians
I cant get it working.. I have flash mx 2004 pro..
I m trying to make sense of how to load a swf into a parent MovieClip and allow them to communicate.I ve attached two zip files � one which works fine and the other doesn�t. Unfortunately (for me), the one which doesn�t work is closer to my current project.I need to load movieclips into the parent movieclip. The parent movieclip has controls which rely on values parsed from the child movieclip.In the parent movieclips I wait until the loading is complete and so the values should be passed. However, the values aren�t passed unless I use a button (or timer), to pass the values (see the working exampes).The code which doesn�t work is:
Parent movieclip:
ActionScript Code:
stop();
var myLoader:Loader = new Loader();[code].............
I have two SWF-Movies. One is exported into eht other as Child.Can I instance the Objects of the two libraries in all places, where ActionScript is possible? (In Keyframes of the MovieClips and in external class definitions.)
View 3 RepliesLooking for a way to stop all movieclips both are the stage and that are children of the ones on the stage.
I toyed with looping thru stage's children so I can first target clips on the stage. But I am getting error.
for (var i:int = 0; i < this.numChildren; i++) if (this.getChildAt(i) is MovieClip)
{
this.getChildAt(i).stop
}}
I have created 25 MovieClips on the stage in 5 X 5 matrix.How can I treat 5 movieclips in each row as a group of movieclips so that I can apply same set action to them?(Similar to RadioButton functionality. )
View 6 RepliesPrinting an MC is easy enough. But I am having trouble printing an MC which has multiple MCs inside of it. They just don't get printed.
I am trying to avoid printAsBitmap.
I want to test mc animations without having to hit F12 to see if they work correctly. For instance, if I have an animation movieclip and then I make another movieclip and drop that aforementioned movieclip within, and animate [via the timeline or library preview] I'm unable to see on-the-fly what my animation looks like... it only shows the top most nest, unless I F12 it.
So if I have a character blinking eyes (one movieclip) and then I create another movie clip of the face, and put that aforementioned movieclip within, the preview animation within the library does not show how it'll be viewed when F12'n it.,,,, it'd be great to see your animations on the fly.
why does a MC inside another MC have different _x and _y values than the main timeline?What I am trying to do right now is animate a MC inside another MC then get the main MC holding everything to move where that new MC ended animating at (it's part of a game I'm making.)
I know it's confusing but Flash shows the cursors current X and Y in the info panel, which is the same as the main timeline. Yet inside the movieclip, an x of 76 and a y of 277 on the timeline is -195 and -30.9 (respectively) inside the MC.How do I fix it so I can get the _x and _y values to match up so I can tell the main MC to reposition itself to the new X and Y (of the inside MC)
I have a movieclip called mapWindow, inside mapWindow are dynamically created movieclips of various sizes. The movieclips inside the mapWindow don't take up the entire space of the mapWindow and thus I use a startDrag on the mapWindow upon detection of a mouse press. The problem is, I don't want the start drag to start if the mouse is detected over any of the child movieclips inside mapWindow.
I have a few ideas of how to proceed, but I'm not sure how to reference all child movieclips of a particular movieclip - or something along those lines.
It would be easy to use the hittest function if I knew how to reference all the movieclips I need to, but alas...
Using Flash CS4 - AS 3.0
how to control a movie clip using a separate movie clip.
on scene 1 (2 frames long), i have 2 movie clips.
-bFind (24 frames long)
-textEffects (14 frames long)
i want to jump to frame 7 of the textEffect movieClip when i hover over bFind
i have my AS code in the first frame of the movieClip called "Bfind"
Code:
stop();
addEventListener(
MouseEvent.MOUSE_OVER,
[Code].....
I'm using flash MX 2004 Professional. What im trying to is the following: I have 9 movie clips, each has a "closed" and "open" state. Basically, when I click no.1 I want it to animate open, and then, when I click no.2, it must first check if any of the other clips are in their "open" state and if so, close them. I've worked with the following, but it doesnt seem to be working:
[Code]...
I am still transfering from AS2 to AS3 and right now i am having a very annoying problem. THE STRUCTURE:
Maintimeline contains 2 buttons that i want to use to access children in a bunch of movieclips. rectangle_mc has circle_mc circle_mc contains xx_mc xx_mc contains wtf_mc placed on frame 1 on maintimeline Why can't flash see my nested movieclips? I remember in AS2 you could go down the line:
[Code]...
I am starting with AS3 programming icm with Flash Builder 4.I have created a "Main" class which is the initial stage.On this stage there is a movieclip called mcMain.In this mcMain is 4 other movieclips: mcStats1 mcStats2 mcStats3 mcStats4 .How can I access these mcStats1-4 from the code to make them go to another frame?I tried:
var t:MovieClip = MovieClip(getChildByName("mcMain"));
t.getChildByName("mcStats1").gotoAndPlay(3);
But that just keeps giving me null reference errors:TypeError: Error #1009: Cannot access a property or method of a null object reference.
I used to work in AS2 and something like this worked:
mc1.mc2.onRelease = function () {
mc3.gotoAndStop(2);
}
But converting it to AS3, it doesn't work anymore.
function goMC (e:MouseEvent):void {
mc3.gotoAndStop(2);
}
mc1.mc2.addEventListener(MouseEvent.CLICK, goMC);
What am I doing wrong? I can't seem to control movieclips within movieclips.
How do I add a title/label name to a key frames on a layer? After I create a key frame, I should be able to add a name to that frame. I am creating several stops along the timeline and want to name each one to make it easier to follow.
View 1 RepliesI am loading a drop down menu file into another animation. It's working except the menus should drop over the animation below. As the images change in the lower animation they cover up any drop down menu that is displayed.
The command I am using to load the menus is as follows:
var myLoader:Loader = new Loader(); addChild(myLoader); var url:URLRequest = new URLRequest("ncjhs_Menus.swf"); myLoader.load(url);
I need to load the menus - with all its layers - into the uppermost layer. Is there a simple way to set the target layer when loading a movie? I'm assuming you need to specify a target container/object in the target ... ?
