ActionScript 3.0 :: Variables Defined Inside Of Other Functions?
May 3, 2010
Trying to find the best way to use the xDoc variable in the newImg function without adding the newImg eventListener to the xmlLoaded function
var myXML:XML;
var xDoc:XMLDocument;
var xmlLoader:URLLoader = new URLLoader();
[code].....
View 5 Replies
Similar Posts:
Aug 22, 2007
I've been trying to get these variables that are defined inside this XML Array, outside of the XML array using _global, so that i can use them else where in the animation, but i'm not getting any purchase.
[Code]....
View 2 Replies
Mar 26, 2010
I'm trying to make a button that gets it's getURL address from an external text file. So, I load the text file and assign it to a variable:
[Code]....
View 5 Replies
Jul 29, 2007
var q4:Boolean = false; //Will have thirty-eight of these, q4-q41
function noRepeat() {
if (q(_root._currentframe) == true) {
gotoAndStop(randRange(4, 41));
} else if ((q(_root._currentframe)) == false) {
q(_root._currentframe) = true;
}
}
Now, my problem is the bits in red (yes, I know they don't work, that was just the best way I could think to describe what I wanted).
If I create a string that says "q4" then I find it won't compare that to the boolean variable, but I'm positive there must be a better way than putting one of these on every frame.
View 2 Replies
Dec 17, 2009
So, performance wise, is it necessary to null references to classes, etc inside a function? Something like:
Code:
function myFunction():void{
var myVar:myClass = new myClass();
//do stuff with myVar...
//don't need myVar anymore
myVar = null; //is this necessary?
}
View 4 Replies
Mar 19, 2011
clarification. let's say i have a function
function myFuction():void
{
var myArr:Array = new Array();
[code]......
View 2 Replies
Apr 19, 2005
Can anybody tell where the class functions are defined?[code]
View 1 Replies
Apr 19, 2005
where the class functions are defined?
e.g. the function function toUpperCase():String; in
C:Documents and SettingsuserIdLocal SettingsApplication DataMacromediaFlash MX 2004enConfigurationClassesString.as
View 1 Replies
Apr 22, 2011
I don't understand why within my function, initially the status of stage.scaleMode via a trace() is NO_SCALE, then it becomes SHOW_ALL. The code below is found at three different location in my overall code.
stage.scaleMode = StageScaleMode.NO_SCALE; backgroundPositioning(myStage.stageWidth, myStage.stageHeight); stage.scaleMode = StageScaleMode.SHOW_ALL;
View 8 Replies
Nov 9, 2003
wrote the code for motion straight into the action panel of the bubble symbol and simply duplicated the symbol alot to add more bubbles. What I wanted to do is change all that code into global functions that can simply be called by each movie clip thereby cleaning it up alot and making it more modifyable. The problem is that I can't figure out how to write and call the functions properly. Here is what I have:
Layers:
Actions: where the functions are defined
Bubble: contains symbols (clip calling the functions)
[code].....
View 6 Replies
Jan 14, 2011
Functions embedded inside other functions? In all my years of ActionScript programming, I've never seen this (this is part of legacy code written by someone else which I am adapting):
[Code]....
View 6 Replies
Jan 15, 2009
All of the variables that i define in frame one appear to no longer be defined in frame 2.
Here is a snippet of the actual code from frame 1 and frame 2 in case I'm missing something.
Frame 1:
ActionScript Code:
function init() {
var markedFrom = myVariables_xml.firstChild.childNodes[0].firstChild.nodeValue;
//trace("Marked From: " + markedFrom);
[Code].....
View 9 Replies
Sep 28, 2010
What I mean by that title is, how would I define a variable name, with a variable, and some text, for example.
ActionScript Code:
var i:Number = 0
var ["test"+i] = "Test"
Where i changes to continually give me different variables, and, in this case, I would have the variable test0.
The above gives the error "Identifier expected". Oh, and it would also be useful to know how to do it in AS3, but I mainly need to know it for AS2.
View 2 Replies
Jun 15, 2010
I am trying to add an init() function to a MovieClip, but when I run the function from scene1 the variables that were set in the MovieClip are not defined yet... The MovieClip was dragged to the stage from the library.scene1:
mc.init(null);
MovieClip:
var _default = 5;
[code].....
View 1 Replies
Aug 10, 2009
I have been playing around with combining flash and PHP/Mysql for some time now, mainly sending one flash variable to a PHP file and then retrieving a result and turning it back into a different flash variable. My problem is i've got to the stage where I need to access these variables from other functions. Now I think I need to find some way of defining them outside of the function, maybe using global vars? Well i'm not gonna pretend I know anything about it. The two functions from which I access my PHP variables is as follows:
ActionScript Code:
function btnDown(event:MouseEvent):void {
var variables:URLVariables = new URLVariables();
var varSend:URLRequest = new URLRequest("http://localhost/test.php");
[Code]....
So I need a way to access the phpVar1 variable in a totally seperate function
View 6 Replies
Aug 23, 2009
The problem which i have is about using variables (specifically "myVar") defined in one as3 class file, in a separate class file. After searching for this via google and on this forum i have not (maybe because i have been searching for the wrong thing), so here is my situation which i think should be simple to solve:Inside a fla called "Main" i have 2 MovieClips. The first is called Main and has a class linking to the com/Main.as file which has this code:
ActionScript Code:
package com{
import flash.display.MovieClip
[code]....
View 6 Replies
Aug 29, 2005
it's not working. why not?
[Code]....
View 8 Replies
Aug 22, 2009
Here is the problem:I have 2 external as3 files in a "com" folder next to the FLA within which i am working. The first of these ( "Main.as") is the document class. The second ("events.as") contains variable definition "myVar:Number = 0" which i want to be able to access and change inside Main.as. I am sure that this is possible, but i can't get it working (flash very keeps pointing out that I have made an error. Specifically that old classic: "1046: Type was not found or was not a compile-time constant: myVar." which has puzzled me since the dawn of time.
View 3 Replies
Jun 5, 2009
The following bit of code outputs that 'myRequest' and 'i' are not defined.
Code:
//Load external asset
function loadfail():void
{
[Code].....
after a bit of reading I find that it is because 'myRequest' and 'i' are defined within functions, and so those variables are not available outside those functions. How can I get around this? Make a class?
View 2 Replies
Jan 18, 2006
Code:
class className () {
//constructor
function className(targetmc,linkId) {
[code]....
My question is how can I set up an interval when I click on a button that is created from within the class.
I need my function updater to keep repeating untill I clear the interval.The only way I can figure out is to give the full path like this._parent._parent.instanceName.updater inside the setInterval, but although this works I think is just dumb to hardcode the instace name of the class. I could of course try to pass the instance name as a parameter, but I would really love to find out the smart way to do this (by the book).
View 3 Replies
Feb 26, 2011
I'm trying to test of a point is inside of a Quadrilateral, as defined by four points.I found some script on another site in another language and tried converting it, but I doesn't seem to work. It might be that I don't understand what their "sign()" method does. I thought it was Math.sin().
[URL]
Code:
import flash.events.MouseEvent;
import flash.display.Shape;
import flash.geom.Point;
[code]....
View 3 Replies
Aug 4, 2010
What im going to be doing is replacing the bottom info with just a link-strip, unfortunatly I didn't want to have to sift through ten dynamic text fields re-animating every one with tweens to the way I wanted them so I set them all to a parent variable defined as "mt", such variables being as follows:HomePortfolioDocumentationDev BlogCase StudiesSupport For
View 4 Replies
Aug 7, 2008
I have completely hit a wall. Here's what I'm after. I have two sets of radio buttons, each of which controls what loaded swf appears on stage. Then, depending on which button is clicked in group one and which button is clicked in group two, a third swf appears. I can access the value of each radio button, and I'm passing it into a variable (I think - the trace command works) but when I drop it all together into an if/else statement, no data is passed.
Here's the code:
//printArea is a movie clip on stage, which has dynamic mc's attached via code
var thisFront;
//function for what happens when fronts radio buttons clicked
frontListener = new Object();
frontListener.click = function(evt) {
[Code] .....
View 3 Replies
Feb 9, 2010
I am using flex builder 3.2, Action Script 3 and develop for Flash Player 10 and am quite new to it. when I call a method of a self defined class, I get the 1061 error (not defined). But the class and the method exist and are public, so what the hell am I doing wrong? Flash Builder is even offering me this method in the auto-completion, so at least the builder knows it... I have already tried cleaning the project (as this is the common source of strange errors when working with java/eclipse),
edit: solved... The problem was that a package had the same name as the variable I used for the class. Very strange error message, thumbs down for this .
View 0 Replies
Aug 20, 2009
If I have a function and I want to call a variable from another function (only 1variable), how do I do it? I know in the olden days you could set the variable to local or global, but that does not seem to work anymore. There is only 1 variable I need access to, but all the tutorials I have come across talk about making classes for multiple variables.
e.g. function2();
{
variable_b = variable_a;
}
[Code].....
View 3 Replies
May 8, 2010
Why does this not work???
Code:
function myFunction(val0,val1,val2){
trace(this["val"+0);
trace(this["val"+1);
trace(this["val"+2);
}
myFunction("hello","test","hi")
All i get is undefined. If i just put "trace(val0)" i will get "Hello" -- so i cannot work out how to get the value of the dynamic variable inside hte function?
View 4 Replies
Mar 16, 2012
I got this variable:[code]is there a possibility that the compiler gets confused because my variable has the same name like the functions's parameter (type = type)? i'm not certain about this topic. Normally I'd write my function's parameter like this (if such a case occurs):[code]just to make sure the names do not exactly match.
View 3 Replies
Nov 16, 2005
I can't figure this out.
Code:
function createTextBoxes() {
for (var n=0; n<caption_obj.textXML.length; n++){[code].....
The XML portion is working fine. What I'd like to be able to do is access the created text fields outside of the function. For example:
captions1.alphaTo(0,1,"linear",1);
This works fine when it's inside of the function, but outside of it, it won't. Basically I need to time the captions to things that are happening in an animation. The animations are also tween driven, so it would be something like obj_mc.tween("_x", 200,2,"linear", 5,fadeOutCaption1); with fadeOutCaption1 being a function that fades out the first caption and brings in the second. If there is a better/more effecient way of doing this let me know.I also can't seem to apply any styles to the text field. Do I need to create an array or object with ["captions"+n] and then pull from that?
View 2 Replies
Feb 5, 2009
haven't wrote here for a while!This is what I'm trying to do:
var level:Number = 1;
var goat:* = "thisIsLevel" + (level + 1);
var camel:Function = goat;
[code].....
View 3 Replies
May 26, 2009
I have an animation that has roll overs controlled by AS (see code below). It works the way I have the code, but it's really messy code. And I hate that I'm have the functions rewritten for each event.How can I simplify this code?
//On the main timeline
var gearsEnabled:Boolean = true;
var gears2Enabled:Boolean = true;
[code]....
View 4 Replies