My video continues to play when I click another button, I have tried using soundMix, but that cuts off all the sound to my other videos. Iam new and have been trying to serach for this problem for over 2+ weeks.
View 1 RepliesI am making my second video, so I'm not too knowledgeable. Anyway, I imported audio into my video and it plays back fine. So I play the video, and pause it to try and synchronize the audio. The video stops, but the audio keeps playing, and it will not stop until the whole thing has played. If I try to start from the beginning again and play the audio to sort of override it, it just overlaps with the original audio, and the resulting noise gives me a headache. I don't know if somehow I can stop the audio a
portion of the way through
Into my main SWF, I'm loading an external SWF with anUlLoader component. This external SWF plays an FLV using thatrespective component. Everything works fine, except that when Iclose the external SWF from within my main SWF, the FLV audiocontinues to play.
View 3 Replieswhen i play the movie and click on any ball it shows the subpage one by one continuously rather than to stop as per the number of their page order.
View 4 RepliesI'm trying to fade in a button over a looping video clip however, it fades in and disappears after a few seconds. I tried adding stop() to the button but it stops the whole movie instead of just the button.
View 1 RepliesI'm trying to fade in a button over a looping video clip however, it fades in and disappears after a few seconds. I tried adding stop() to the button but it stops the whole movie instead of just the button.
View 9 RepliesI have a mp3 player in a stand alone swf that I load into level 30 (or something). It works just fine, plays music and stop when I click the button. However, it continues to play after I have left my site and are browsing other pages, and at that point you have no way of turning it off. This is if course a big problem and I have taken the music.swf down for the time being.
Code:
stop();
// Preloader variables
var t = 0;
var l = 0;
var p = 0;
// Stop the stop button from morphing
//this.control.gotoAndStop(1);
[Code] .....
So, what is happening here? Why does it continue to play when I leave my site.
Below is the function I use to remove the swf which holds an FLVPlayback component and the button that runs the function. The function stops the video then removes the swf. The swf disappears and the sound stops but if I look at the task manager I notice the video is still loading usually at about 1 meg every 5 seconds. I know I'm supposed to be able to use the closeVideoPlayer method which should stop the netstream but I don't how to make it work
function goHome(e:MouseEvent):void myMovie.stop(); this.parent.parent.removeChild(this.parent);// myMovie.closeVideoPlayer(0); meCombo.removeEventListener(Event.CHANGE,
[code].....
I have noticed a very frustrating error in flash lately. I will be watching a video in full screen mode...on any site...then all of the sudden, the video freezes and the sound continues. This does not fix automatically. I have to minimize the video from full screen to default size and then the video unfreezes and I can then go back to full screen mode.However, eventually I have to repeat this because the video freezes again.
This happens in Firefox 3.5.6 and Chrome 4.0.249.43. I am near certain I can get this to happen in any browser but I don't use other browsers to play videos so I have not tested my theory. All I know is that the problem is very consistent.
I am using Flash Player 10 ActiveX version 10.0.32.18 in XP Pro SP3.
i have a audio track in a movieclip that i am loading into a target and i am doing an unloadMovie to remove it from the stage, but the audio clip continues to play until it hits the end/loop point... so my question is, how to i make it stop as soon as it unloads?
View 3 RepliesI'm working on a Flash file here and am having a bit of trouble getting it to do what I'd like. Basically, the file has 3 sections:1) The main content and a Play button (I've got this made and working)2) The video itself that plays when you click the play button (I've also go this taken care of)3) After the video plays, I need to to go to another frame or scene that is different from the first.Is there a way to do this? I've been Googling for a while now but I keep coming up empty.
View 3 RepliesI am trying to use a getTimer method that takes me to another frame (frame is "memory") after a certain amount of time after the movieclip has been loaded. The frame that I want it to go was given the name already. The timer itself does count when tested, but it just continues counting.
[Code]....
how to have a movie play, then have the program go to the next frame? For example, start the .swf, have it play a movie or 2, then go to the main menu.
I know how to import video, I just have no clue how to code it to play the video, then go to the next frame. I'm sure there's a tutorial for it somewhere, but I haven't had much luck finding it.
How can I play a play a different video when exiting a frame?
View 1 Repliesmain.swf has a button that when clicked activated loadMovieNum 1.swf on top of main. I need a button on 1.swf to unloadMovie back to main (works) but when the main.swf is loaded I need it to go to a specific frame. I tried this on the button in swf 1 and the first part works but how can I get the videoindex.swf 0 to play a frame?
on (release) {loadMovie("videoindex.swf",0);}
on (release) {
gotoAndPlay("spaces");
}
I have a 15 second video that's not embedded (it's sourced from an url). How can I get it to play the next frame when then video is finished?
View 2 Replieswhat i want to do is embed a video into a flash time lime, then once it is one the time line use frame labels to play different sections of the video.everything i have tried up to now just plays the video from the beginning.
i have used a stop at the beginning on a blank key frame but i dont want it to play the video from the beginning i need it start playing from about half way in.the first half of the video is being used on a different section.
I have a video in a frame that corresponds with the label "eight". i have a button on the timeline with the following code. i've tried it both gotoAndStop and gotoAndPlay and it doesn't work.
on (press) {
gotoAndStop(eight);
}
I need to play preview video first, before starts play any other video. I am using jw player
View 1 RepliesI have my flash on multiple scenes, and would like to play an animation when clicking on the navigation button before switching to a different scene.
I'm halfway to accomplishing this.
Here is what i used
Code:
_root.gotoAndPlay("changepage1");
_root.onEnterFrame=function(){
if(this._currentframe=="changepage2"){
[Code]....
The above code is on a blank keyframe. Changepage1 is the start of the animation and Changepage2 is the end of the animation.
Upon clicking the navigation button it plays the above scenes.
However it doesn't change scenes to scene "Home2".
i have a movieclip on stage. it has 3 frames but is stopped with "stop():" so it only shows the first frame on mousedown i want it to play frame 2 for a duration of 1 frame then frame 3.
View 3 RepliesI hope I can ask this correctly. I'll paraphrase.
press_mc.onRelease = function(){
mover2_mc.play()};
This is a snippet of some code I'm working on. Currently I have a mc that you press that plays another mc. That mc that reacts has 5 frames, each frame with stop(); on each frame. I do a normal play code because it lets me play through and cycle back to frame 1 after frame 5 (so if I click the mc it eventually cycles back to the first frame and starts the process over again). If I do a nextframe it stops at frame 5, so that's why I use play.
press_mc click on it and it tells mover2_mc to advance a frame and recycles back to frame one to redo the process.Can I tell press_mc to play and skip a frame or to have it play a list of frames that I tell? I can't do a _currentframe +2 because it'll halt at frame 5.
how to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
I'd like my Flash site to be bi-lingual. What I have currently is a Flash movie with an empty Movie Clip which then allows users to go from movie to movie. The movies are all small movieClips that are loaded into the empty movieclip on demand. There is some video and text in each of the 30 movieClips.
Here is sample of code that i'm using to call up next MovieClip.
[Code]...
My solution for the bilingual version is to create a separate frame with the French version + video and then when user presses the French button they are directed to that frame. This way I could easily create the French text within the one movie. however i don't know the Actionscript code to call up a movieClip to play from frame 10, and not frame 1.
I am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 RepliesI am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 RepliesThe stop button plays as expected. The play/pause button plays as expected. The issue is when you press pause which will cause the play button to appear, then press stop. the video automatically plays and it shouldn't. I have bolded the control button script for convenience.
[Code]...
the player uses a VideoDisplay and i set the source like videoDisplay.source = "sourceStringURL"
and the vid doesn't play until it's fully loaded
Why does my swf's skin referenced by a simple component FLA work locally but NOT live? There's no AS3 in the component FLA. It's just a one-layer component referenced to the the FLV. When I test locally, IN FLASH CS4 ONLY, and click on "Animalia - Verse From the Zoo" the FLV and skin load and the video (source FLV - "Sequence01.flv") plays. But the same thing live only loads the swf for the FLV file area but NO SKIN. Try it yourself, please:Has anyone had this problem and knows the solution? All files are in the SAME FOLDER on the web server. I've tried every URL and path combination I can think of on the website. I've tried referencing the whole URL.
Yet whatever path combination I try, either nothing happens, or I just get the FLV box but no skin. Which is what's happening now. Publish settings are set to Flash Player 10 for all files. And I've tried the component SWF WITH and WITHOUT the fl.video package (import fl.video.*. No difference. Why does the skin load and play locally but not live? It's all AS3. No AS2. And it does not seem to be a "publish settings" issue as far as I can see. The relevant code in my API is:
var AnimalFLVLoader:Loader = new Loader();
AnimalFLVLoader.contentLoaderInfo.addEventListener (MouseEvent.MOUSE_DOWN,fAnimaliaVOn);
Animalia2.addEventListener(MouseEvent.MOUSE_DOWN, fAnimaliaVOn);
[code].....
I have a project where I am bringing in one video with a cue point at the very end with the name of "End." I'm trying to have the next video play when the first video reaches that cue point. I keep getting this error: 1046: Type was not found or was not a compile-time constant: MetadataEvent. Here is the relevant code I believe:
[Code].....