ActionScript 3 :: Flex4 - How To Embed Lot Of Images

Oct 11, 2010

I would like to know what is the more practical way to embed many images using actionscript. Firstly, I don't want to download an image every time from the server, and then I would like to change the number of images and/or their names. What do you propose for these requirements? I have been alerted for the Embed tag but it seems a little inconvenient in its use as you have to declare a new class for each asset and instantiate the class separately.

View 2 Replies


Similar Posts:


Flex - Embed Pure Bitmap Assets With Flex4 (worked With Flex3)

Apr 19, 2010

In Flex3, I could compile pure as3 code and use "embed" tags to load in images. This was done by Flex making a BitmapAsset class.I can still do this in Flex4.

However, there was a trick to fakeout flex3 and use my own mx.core.BitmapAsset class to remove some of the extraneous stuff Flex's BitmapAsset brings in with it. This is described here: [URL]..Unfortunately, I cannot get these tricks to work with Flex4 and get smaller file sizes. I end up with the error "VerifyError: Error #1014: Class mx.core::BitmapAsset could not be found."[URL]..Following this advice, I add -static-link-runtime-shared-libraries=true, and my swf loads without an error... but this means I am loading in the pieces of the flex framework I wanted to omit (and the file size says so too).

Is there a better way to fake out flex4 when it comes to using Embed?

View 2 Replies

Flash :: Flex4: Loading Flex4 Swf Using Swfloader Shows Only The Loading Bar

Dec 23, 2009

I try to load an swf in my flex 4 project using the following line of code: <mx:SWFLoader id="game_swf" source="demo.swf" complete="init()" /> the demo.swf file is another project i created using flex 4. the problem is that when i run the application i see only the loading bar of the demo.swf flash file and nothing else. if i try to load a different swf file (for a example a game i downloaded), it loads just fine.

View 1 Replies

Embed Swf File With Images?

Apr 28, 2010

I am trying to embed a swf file, that came with images in folders, on a website. I don't have the original flash file. It works when I upload the file: [URL]

When I embed this code in our website, I get error message about the images.

<object width="448" height="480">
<embed src="http://www.canadianart.ca/microsites/flashfiles/mullin/mullin_combo_lowres.swf" width="448" height="480" allowFullScreen="true">

[Code].....

Is there a way to do something without the original flash file?

View 2 Replies

How To Embed Swf File With Images

Nov 23, 2010

I am trying to embed a swf file, that came with images in folders, on a website. I don't have the original flash file.It works when I upload the file: [URL]When I embed this code in our website, I get error message about the images.

<object width="448" height="480">
<embed src="http://www.canadianart.ca/microsites/flashfiles/mullin/mullin_combo_lowres.swf" width="448" height="480" allowFullScreen="true">

[code]....

The error messages are:

ERROR: download of "mullin_combo_lowresdata/graphics/btn_home.png" failed
ERROR: download of "mullin_combo)lowresdata/graphics/btn_openfs.png" failed ...

Is there a way to do something without the original flash file?

View 6 Replies

ActionScript 3.0 :: Use Embed-tag For Images?

Jan 13, 2012

I would like to know if I have to dispose an image in AS3/Flex when using the EMBED-tag[code]...

When I addChild this class and remove it via removeChild, do I have to dispose this or is this unnecessary? I just ask because it uses the Bitmap-class and under normal circumstances you have to dispose it for the garbage collector.

Or is there another way to embed images without the Bitmap class? I just ask because I'm new to Flex and have problems embedding my stuff into my game.

View 2 Replies

Actionscript 3 :: Embed - How To Use Tag For Images

Jan 14, 2012

I would like to know if I have to dispose an image in AS3/Flex when using the EMBED-tag:

[Embed(source="../../../../../assets/interface/pause/cancel_btn_off.png")]
public static const CancelOffBtn:Class;
private var cancelOffBtn:Bitmap = new Library.CancelOffBtn();
addChild(cancelOffBtn);

When I addChild this class and remove it via removeChild, do I have to dispose this or is this unnecessary? I just ask because it uses the Bitmap-class and under normal circumstances you have to dispose it for the garbage collector. Or is there another way to embed images without the Bitmap class? I just ask because I'm new to Flex and have problems embedding my stuff into my game.

View 1 Replies

ActionScript 2.0 :: Embed Images Into One Swf?

Apr 22, 2009

Since I want a loading progress for several images together I want to embed images into one swf.

How do I embed images so that they are included in the swf?

View 2 Replies

ActionScript 3.0 :: Embed Images Into HtmlText

Jul 8, 2011

I'm searching high and low for a solution how to embed small 16x16 Icon Images into htmlText! Has anybody an idea where I could find something on the net about that item ??? Found this, but can't get it to work at all.

[Code]...

View 1 Replies

Actionscript 3 :: Embed About 90 Images In The Flash

Aug 6, 2010

I have about 90 images which I need to embed into action script (version 3). The only way I could figure out is typing the following code 90 times for each image.

[Embed(source="images/door0091.bmp")]
private var Door1:Class;
var door1:Bitmap = new Door1();

It's really painful to write it so many times. I would like to know if there is any way to do it programatically?

I cannot use the loader method as the images need to be present along with the swf file. I want the swf to be independent once it is compiled.

View 3 Replies

Actionscript 3 :: Way To Include Images Than Embed?

Nov 4, 2011

I am putting together a Flash game (using Flixel) and I have a lot of sprites whose images (.png format, mostly) I need to include in my game. I'm used to using code like:[Embed(source = "../../lib/ship-0001.png")]private var _ship0001Sprite:Class;in order to include an image file. Is there a way I can do this other than embed? I'd like to use a for loop if possible, grabbing every needed file by number. This way instead if having several lines for each ship type (to grab its sprite, icon, store view, etc), I can just change a variable (eg NUM_SHIP_TYPES) and add the files by number for the new ship.?

View 3 Replies

ActionScript 3.0 :: Embed Images To Different Vars?

Oct 19, 2009

I have those images: img1.png, img2.png..., imgn.png.and I want to embed them without writing n lines of embed.so I want something like:

Code:
for(i:Number=1;i<n;i++)
{

[code]......

View 1 Replies

ActionScript 3.0 :: Flex Embed-tag For Images - How To Use

Jan 13, 2012

I would like to know if I have to dispose an image in AS3/Flex when using the EMBED-tag:

[Code]...

When I addChild this class and remove it via removeChild, do I have to dispose this or is this unnecessary? I just ask because it uses the Bitmap-class and under normal circumstances you have to dispose it for the garbage collector. Or is there another way to embed images without the Bitmap class? I just ask because I'm new to Flex and have problems embedding my stuff into my game.

View 2 Replies

Actionscript 3 :: Embed Images Of Type 'bmp' In To The Flash?

Aug 9, 2010

I have an image of type '.bmp' (NOT jpeg or png). I am trying to embed it using the following code.

[Embed(source="images/door0091.bmp")]
private var door0091_class:Class;
private var door91:Bitmap = new door0091_class();

On compiling, the code throws following error.

'door0091.bmp' does not have a recognized extension, and a mimeType was not provided Unable to transcode door0091.bmp.

To overcome that I tried to give a 'mimeType' which is giving a type coercion error during runtime:

[Embed(source="images/door0091.bmp", mimeType = 'application/octet-stream')]
private var door0091_class:Class;
private var door91:Bitmap = new door0091_class();

TypeError: Error #1034: Type Coercion failed: cannot convert DoorImages_door0091_class@3891e041 to flash.display.Bitmap.

I've searched in the google, but I am not able to find the correct answer.
I don't want to convert the image type(bmp) to jpeg or png.

View 1 Replies

ActionScript 2.0 :: Embed Xml And Images To Flash File?

Dec 30, 2011

I have this flashbanner that is using an external xml file which lists the images used in the movie. Is it possible to embed this xml and images to the flash document. Because i've no possibility to use any external files wit this one...just the flash file.

XML:

<icons>
<icon image="icon1.png" content="Valio Polar 15%.
Pysyvsti halvempi hinta 4.11.2011 lhtien" />
<icon image="icon2.png" content="Valio Polar 15%.

[Code]....

View 1 Replies

Flex :: Display Embed Images In Flash / Builder?

Jun 7, 2010

I'm using image embedding in Flex 4 (the same goes with Flex 3). [code]...

When i run the application i see the icon but in Flash(Flex) Builder i can't see the images while working in Design mode. Is there any way to enable image visualization in Flash Builder design mode ? or a better way to include resources.

View 2 Replies

Css :: Flex 3 Embed Throws "Invalid Embed Directive In Stylesheet' Error On Linux

Mar 9, 2010

We have a flex application which compiles fine on windows box using mxmlc ant task but when we try to run the same build scripts on linux, it throws the 'Invalid Embed directive in stylesheet' error indicating it is not able to resolve the path to the image files.

Can someone pls. educate me on if there is a difference in the way the image files are looked up, in a CSS file, on windows vs linux.

Flex sdk version is 3.3. The same sdk is used on both windows and linux. Not sure if this has been fixed by any future 3.x sdks.

View 2 Replies

Actionscript 3 :: Embed Dynamic Audio File(s) / Use Variables In Embed?

Feb 10, 2012

Making a piano/keyboard application and trying to figure out the best way to set this up .I plan on having a directory of sounds for each 'instrument' in my assets folder (piano1/C4.mp3,piano1/D4.mpg,...)Is there a way to import/embed all of these as an array? Also is there a way I can pass a variable to this class to indicate which folder I want to import these from? Something that would be ideal

var type = "piano2"; //passed from class being called by
foreach(notes as note){
[Embed(source = 'assets/sounds/'+type +'/'+note+'.mp3')] private const C3:Class;
public var c3:Sfx = new Sfx(C3);
}

Or would it be a better idea to have a class for each of these "types" that pulls all notes?

View 2 Replies

ActionScript 2.0 :: Embed The Fonts Using The Embed... Button In The Flash IDE ?

Jan 30, 2007

I am using the following line before my class declaration .

[Embed(source="C:WINDOWSFontsVERDANA.TTF", fontName="VERDANA", mimeType="application/x-font-truetype", flashType = true)]

But there is no change in the appearance of the Text whatsoever.. I need the text to be crisp and clear.Just like the way it looks when we embed the fonts using the Embed... Button in the Flash IDE.

View 1 Replies

Flex4 :: Migrating CSS From Flex 3

Sep 10, 2010

Is there a guide or document that deals specifically with migrating CSS and style attributes from Flex 3 to Flex 4? I have an application that I'm keeping on the 2006 namespace, but I'm having trouble with a couple concepts, like the halo only styles, the CSS namespacing conventions, and styling child controls.

View 1 Replies

Flex4 :: Get Second Item From DropDownList

Jul 4, 2011

Does any one know how it's possible to get in Flex 4 a value of the second item from Drop Down list, assuming I have 3 items listed there?[code]

View 1 Replies

Flex4.5 Accordion With Checkbox?

Aug 4, 2011

I have the following code for accordion in Flex 4 with couple of checkboxes inside, since the checkboxes are plenty i made it inside a list so that it can scroll. but when I try to run this code the checkbox only shows as label and no checkbox beside it. what is wrong with my code.

[Code]...

View 1 Replies

Actionscript :: Flex4 And Facebook-api : Cannot Login

Jan 25, 2010

I wrote a simple application for facebook and it seems that i fail to login. I created a test application on facebook and i test my application by going to [URL] i have the following function that is being executed after ApplicationComplete event of my main application.

[Code]...

View 1 Replies

Flex4 :: Transition Not Playing First Time

Jul 7, 2010

The first time I change from state A to B it doesn't play the transition. After the first transition, the same state change does play the transition.

Before I let state B load, it parses an xml file and maps it to objects. When this is done, the state changes. Maybe it has to do with the parsing of the xml. But I can confirm that parsing is done, before it changes the state.[code]...

View 6 Replies

Xml :: Flex4 Finding The Name Of The Selected Item?

Feb 10, 2011

I have an XML object in Flex4 that is populating a tree (amongst other things).

I need to be able to find the name of the selected item when it is clicked in the tree.

For example:

<Object id="">
<Image></Image>
<Cycle></Cycle>

[Code]....

The tags are all predefnied by me so I will know what they are, but I need to be able to know if the item a user has selected is "Object" and do something, or if they select "Action" do something else.

What is the syntax to get the names of these in flex4 and compare them?

View 1 Replies

Css :: Make External Theme And Use It - With Flex4?

Mar 18, 2011

I made a SWC project (my new Theme), with these elements :

src/views/MyViewSkin.mxml
src/DefaultTheme.css

I made a SWF project (Flex app), with these elements :

src/views/MyView.as
theme/DefaultTheme.swc // theme building result

In the SWF project, I added this information in mxmlc compiler : -theme theme/DefaultTheme.swc. My problem is : how to build SWC projet (theme) with HostComponent[xx] is external ?

[Code]....

View 1 Replies

AS3 :: Preserve Tabs When Saving XML In FLex4/Air App?

Mar 31, 2011

I'm loading an xml file in AS3/Flex for an AIR app. When I save it, the indenting looks pretty, however all the tabs from the original file, are now spaces. Can I save to that the tabs remain?

open file code:

var file:File = event.target as File;
var fileStream:FileStream = new FileStream();
fileStream.open( file, FileMode.READ );

[code]....

View 1 Replies

Flex4 - Get It Working On FF And Chrome On Windows?

Apr 18, 2011

I am working on a modular application. The problem is that scrolling doesn't work with datagrid and AdvancedDataGrid even in a non-modular application on FF and Chrome on Windows, works fine on IE. On mac, it works fine with FF 4.0 and chrome. how to get it working on FF and chrome on windows?

View 1 Replies

Passing Network Credentials Through Flex4

May 4, 2011

i am new to flex4.i want to pass network credentials (username and password) through flex.i was not able to get appropriate results using [code]

View 1 Replies

Flex4 :: Creating A Scrollbar For Panel

Jul 18, 2011

I am new to flex development.[code]what happens here is that, the part of the panel goes out of the browser view and I need to include scrollbars so that I can scroll to the right end and bottom end of the panel itself.

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved