Actionscript 3.0 :: SWF Preloader - Site Supposed To Start From A Black Background And The Image Fading In
Oct 4, 2010
I have assembled a preloader using the method from this site, everything seem to work except for one problem My site supposed to start from a black background and the image fading in. However once I placed the preloader the image dose not fade in but appears right away to the full strength after the preloader gone to 100% Looks like it jumps to a few frames after the first frame of the main swf file. Please take a look at [URL] If you reload again you will see how the image fade in.
View 1 Replies
Similar Posts:
Jan 14, 2010
i have a set of images which i've converted to mcs and have given them all different instance names. The first image motion tweens to the right of the screen via actionscript and then the next one will motion tween from the bottom of the screen to the top and then the image after that will go to the right of the screen and next one goes to to the top, and so on. I have this actionscript for the first image,
[Code]...
I need the next image to start motion tweeing up to the top of the screen right when the first image starts fading out. Then when the second images starts fading out the next image is already motion tweening to the right of the screen and so on. Once every image has run through its tween everything repeats. Is there any way of doing this?
View 3 Replies
Mar 5, 2002
I'm very close to achieving the desired effect, however, i have been stopped dead in my tracks. I Used Pom's Real/Fake Mask Drag tutorial, so I have that set, however, my problem is getting the ripples to mask...
I have the background, and then I have the other movieclip that is supposed to mask the background (ripple).However, it either does not mask, or it only masks the first frame of the "ripple" mc...
(oh, btw...the ripple MC is dragged by the mouse, so the ripples follow the mouse. I saw an effect like this, a looooong time ago, probly in the days of Flash 3, and i was curious how to go about it, so I have been trying for the last few weeks...)
View 4 Replies
Nov 2, 2010
Is it possible to convert an image (runtime) in Actionscript 3.0 from black/white to black/*color* ...Does someone know a solution? Matrix? Blending methods maybe? Pixel bender?
View 1 Replies
May 24, 2010
i embedded a swf into a page recently. I got it outsourced as i dont know my flash but the guy sent it to me like this.[code]however, the logo was then black in the background. which was really annoying, cause i'd asked for a transparent background and now i had a black one which didnt match the gradient of the header of the page.so i went back to the logo designer and i asked, he didnt know how to make the background transparent with this new code i've used. So, i asked him to make a new one with the gradient in the background. he did, and there are still black bits to the side of the logo..so i thought best to come to a knowledgeable place and ask - how do i set the background for this embedded swf as transparent?URL...
View 3 Replies
Jan 3, 2010
I've imported a flv video file into my movie but it always has a black border no matter what changes we make to the export dimensions of file from Adobe Premier.
I really need the flv to be seamless on a white background.
View 3 Replies
Dec 13, 2010
I am working on a flash website built with as3. It works fine when i test it locally. but when I upload it and test it from a remote server, 5 black dots in a row cycle a few times before the preloader starts. this also will happen when I simulate download locally. does anyone know what these 5 black dots are
View 2 Replies
Aug 11, 2009
I am trying to make a flash movie in flash cs4. All goes well but whenever I return to the scene and then double click on a movie clip or double click on a movie clip in the library I can get to the desired clip but the workspace all turns black and I cannot see the edge of my document /artboard.Sorry if this a silly overlook on my part but I'm stuck and cannot get the proper view back.
View 5 Replies
Apr 30, 2010
What I am trying to achieve might be trivial, however I am loading a PNG mask which does not have a transparent background, but rather a black background, with the shape defined on top in white (the actual mask which needs to be applied). Apparently Flex expects me to provide a mask with a transparent background for it to work, or am I missing something?
If that's the case, could I transform the bitmapData which I am loading so that it treats black color as transparent?
View 1 Replies
Feb 6, 2012
I'm creating a fullscreen projector that has an FLV file on the stage. I successfully got the FLV to appear non full screen by using the answers for the following question:
Non-fullscreen FLVPlayback
However, the background still goes black just before the FLV comes to the stage.
It runs fine when the projector is not set to fullscreen - background is there along with my close button.
View 1 Replies
Jan 9, 2009
i have and opening sequence to an HTML site, that has two sides to it. basically you have two boxes that are buttons when you click on one of the boxs they load a flash sequence that goes into one or the other side of the site, but i need one side to have a black background and the other to have a white bg. I have looked into flash sending a variable to the HTML but have no real clue as to the correct syntax.[code]
View 1 Replies
Apr 28, 2009
I am loading in text from an XML file, and it loads in fine but I am getting a black box behind each of my letters in my text field. I tried to cancel it out by write the background = false; but it is not working. Does anyone know why this is happening? I have loaded in hundreds of .txt files and this has never happened, but this is my first time loading in XML txt, so I am not sure what to do?
View 3 Replies
Jul 19, 2010
I have a flash intro and when ever I preview it,the intro background turns to black instead of staying the way it should be.Can somebody please help me out here,I need this flash intro for a website.Please explain this to me in simple terms because im pretty NEW to adobe.
Note I've tried everything to make the flash background stay the way it was but nothing I do works.
View 6 Replies
Jul 15, 2011
I need a few minor changes done to my site such as changing the text on the About page and also changing it so that when you view a picture in any of the galleriess the background is completely black, right now it just fades out the text and thumbnails and is not entirely black.
I have never used Flash before but am pretty good with Photoshop, Illustrator and a little bit of Dreamweaver. Would these changes be difficult for someone who has never used Flash but can pick things up fairly quickly? I have all the files for my website, any suggestions where I should look first to make the changes I require.
View 4 Replies
Oct 7, 2009
I want to create a background that is made up of circles of different opacity levels. I would like the circles to continue to fade in and out while you are viewing animation. I was wondering what the best way to go about this is, using actionscript 3.
View 0 Replies
Jul 28, 2007
I have a quick question about fading a bg color using actionscript. I am creating a splash page at 800x600 in flash, which is being opened into a new window that fills the browser of the users screen. I already have the actionscript to open into a full browser window.
However, when the user clicks on a button in the 800x600 splash, the bg color in the full browser window will need to change from blue to white. What would be the best way to do this, is there a piece of actionscript that can be attached to a button to do this? Or does a large flash document size need to be created with the 800x600 centered in the middle?
View 1 Replies
Jan 19, 2012
So I've actually managed to set up a pre-loader and as of for now, they way I make my loading bar progress is by streching its x-axis. But how can I change that to make it fade in (animating its opacity from 0 to 100 %) instead of stretch?
Here's the actions for the preloader:
import flash.events.ProgressEvent;
import flash.events.Event;
stop();
[code]....
View 2 Replies
Nov 26, 2010
Im trying to make a 10 minute countdown with white numbers and black background. just need minutes, seconds and milliseconds. sending a fla file or in telling me the easiest way to do this. I dont need a start button or anything else, just the countdown and when time is over just the numbers as 00:00:000
View 8 Replies
Mar 16, 2012
I am producing a fullscreen projector (.exe) file and have some large videos that cause the background to go black when they come on the stage. When I test the movie (not in fullscreen), it works just fine.
[Code]....
View 1 Replies
Dec 7, 2010
I am displaying a series of Flash animations in a WebView. The screen goes black each time I load a new animation—this is visually distracting and I would like it to leave the screen white. I have tried changing the WebView background color, embedding the Flash animation in HTML and specifying the background color, and making the WebView "Invisible" until the page has finished loading but nothing seems to have the desired effect. The Flash animation does not display the black background when run on a PC.
View 1 Replies
Jun 26, 2009
I load this clip:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var myGalleryXML = new XML();
myGalleryXML.ignoreWhite = true;
myGalleryXML.load("gallery.xml");
[Code] .....
In the last frame of my time line I add:
removeMovieClip("container_mc" );
The movie disappears but the placement turns black.
I added:
this._alpha = 0;
But the other clips of the main movie doesn't load.
View 1 Replies
Apr 11, 2011
I'm currently working on this site, which was made on a linear timeline and just rewinds and fast fowards to the frame with each page on [URL]
This was done with limited Actionscript, but now I need to redo it almost entirely in AS
I figure I need to keep everything on one frame (separate vertical frames, but no animation horizontally) and create movieclips for each page's content and tell it to fade in the content of whatever page is clicked on the nav, and fade out the rest. I will also need to do the same, but with the background images in fullscreen. I also have a problem with the bottom nav. It adjusts to window height on resize, but I can't get it to adjust automatically.
So how do I
1. Tell the movieclips to fade in and out when a button is clicked
2. Get the background images to fit full screen, and also fade in/out for each page
3. Get a movieclip to adjust to screen size without using onResize
View 0 Replies
Jul 28, 2011
i downloaded a preloader from flashkit. works great on one of my movies, but on another one, it dont stops on the preloader frame. i dont understand cause it should go to the next scene when 100% is loaded but it just shows a black page.i dont understand cause the preloader scene is identical and it just sends you to scene 1 when fully loaded..
View 3 Replies
Oct 14, 2009
I am trying to load a colour image and then it is changed to black and white image. Here I am using a mask. But it is not getting worked. The code that i am using for this purpose is attached following: import
[Code]...
View 7 Replies
Apr 14, 2010
I have been sent this website. When you click on an option from the menu, the menu and the background fade out to bring in a new background. The problem I am having is that I am trying to stop the menu fading out and just have the background change.The flash file for the part of the website I am working on can be found here:
http:[url].................
View 1 Replies
Jul 28, 2010
I've read through several tutorials but I must be doing something wrong on this. I'm using Adobe Flash Pro CS4. I am trying to create a short clip that fades text in over a bacground video. When I create a motion tween on the text track, I'm generating an error and the background video is no longer visible in the preview. Instead, I see the text over the stage background color. It is as if the background video track has switched to wireframe. Here are the steps I've followed:
1. Created Flash File (ActionScript 3.0).
2. Imported Video into the State background layer - it appears as a black image in the it previews fine at that point
3. Created new layer for text and placed text - it previews fine at this point, text is overlaying video
4. I right click on the text block and choose convert to symbol.
5. Next with the play head on the first frame and the Text layer selected I choose Create Motion Tween. This is when AFP throws this error:TypeError: Error #1009: Cannot access a property or method of a null object reference. at fl.video::UIManager/http://www.adobe.com/2007/flash/flvplayback/internal::hookUpCustomComp onents() at [code]...
View 1 Replies
Jan 17, 2009
Here I've a sound track included in timeline from first frame (not in actionscript).
And after intro, I've a video button where I added a video with sound which starts to play by clicking
Now the problem is both background music & video sound mixing & creates a noise kinda combination.
I need a solution like fading out the background music if i click the video button & fading in when clicking some other button or navigating to other pages?[code]...
View 0 Replies
Sep 20, 2010
I have a flash file with a background music sound object, and I have a video player at a particular section on the timeline. When the playback head goes to the section with the video player, I would like the background music to fade, but of course, I need the volume to be up for the video. The code I have works find to fade the audio, but the problem is that the video's sound also turns off.
This is the code at the beginning of the timeline:
_global.volumeVar = 40; //Stores the current volume.
bgSound = new Sound(this); //This block works finebgSound.attachSound("music");bgSound.start(0,99);
bgSound.setVolume(0);
[Code] .....
Further down the time line, in the video player section, there this code, which works to fade the sound, but seems to turn off the video, too:
nInterval = setInterval(fadeOutSound, _global.volumeVar);
View 5 Replies
May 29, 2002
What I want to do is fade one image out while fading another image in. The script that I am using fades one image to alpha 0 then fades the next one in to alpha 100.The script that I am using is this.On first frame of main timeline
back._visible=false;
function goPage(whichWay){
slides.alphaChange=-5;[code]....
This script works fine but I want to modify it.
View 12 Replies
Jul 22, 2009
I have a wordpress based site that stores information about an image in a database field called "background" in a table called "wp_postmeta".The 'loader' gets an url such as "/thisImage/background.swf"The "background.swf" should somehow display "background.jpg" instead but since I've changed the field name in the database (from background to temp_background) it doesn't work.I pass variables to the "loader" swf and they are correct based on the new field name but it still isn't working.I need to know if there is anything in the .fla's (and therefore the .swfs) that is pointing to somewhere in the database hard-coded. Basically I need someone to look at them and tell me how they are working.
View 2 Replies
