Flash :: Slow On Terminal Server Through T1s?
Nov 3, 2008
2k3 terminal server XP thin clients accross T1 links.My users need to access this sitopening page has a huge revolving flash header. When users openthis site, it brings their session to a halt. Since the header isrevolving, it never relases access back to the users. Since thisweb site is a big part of their daily activities I can't turn offFlash. Is there a way to throttle flash or is there a way to atleast stop moving pictures so the users can get control of their
View 1 Replies
Similar Posts:
May 30, 2009
recently i am working on my portfolio which I am doing in flash cs4, as3. It runs fine on local machine but when i upload it into the server, it runs very slow. in face there is a section where pictures are loaded when a thumbnail is clicked. There are 15 pictures and it doesnot opens at all.
following is the link to the site that I have done so far[URL].. please click on the "projects" to look at the problem I am mentioning. the section"3d modeling is the part where there are 15 pictures and doesnot load at all. same problem with "3d animation" "video editing" works fine. it may be because it has just one video to load.
View 1 Replies
Jan 28, 2012
when i write sudo apt-get install gpp >>> terminal says gpp package not found. How can i install it? And also flash player. I downloaded tar.gz format of flash player but i can not install :D
View 2 Replies
May 7, 2010
I recently upgraded from FMS 2 - FMIS 3.5.Over our internal network videos stream like a dream!However, accessing them from outside our own network means that they take about 20 seconds to load, or sometimes just get a message saying the server isn't found.This wasn't a problem with the FMS2 and there have been no changes to firewall settings or anything like that since the old server was up and running without problems.I have the new server set to use exaclty the same ports, but wonder if there are some other settings which could be causing this?Networking isn't really my area of expertise, and I have no idea where to start looking to improve things.
View 2 Replies
Feb 22, 2010
How do i launched Terminal from air 2 passing arguments and command as well?
View 2 Replies
May 24, 2009
We have installed Flash Media Server on a Linux machine.It has 2GB of RAM,Fedora 9 with kernel 2.6.27.5-41.fc9.i686, the install required a few packages (compat-expat1 was one) to be installed before we saw the sample page. The sample page takes a few minutes to load and opening the page to connect to the admin console is about the same.
This is currently on our internal network while we try and see how it works. Are there any specifc TCP related kernel tuning parameters (eg in sysctl.conf) which need to be put in place over and above the out-of-box configuration. Any troubleshooting hints which might identify the problem. The install seemed ok nothing in /var/log/messages and checking to see what is running (ps aux | grep fms) I see
./fmsmaster -silent/opt/adobe/fms/Apache2.2/bin/httpd -f ./conf/httpd.conf -d /opt/adobe/fms/Apache2.2 -k start/opt/adobe/fms/fmsedge -edgeports :80,1935 -coreports localhost:19350 -conf /opt/adobe/fms/conf/Server.xml -adaptor _defaultRoot_ -name[code]....
but when we clear our browser cache and go to a page it is taking forever.It is taking about 5 minutes to open up the initial page, but when it is open the videos all seem to come through fine.The server previously had apache on it but I removed that copy and went with the version included with FMS.
View 3 Replies
Mar 22, 2011
Though I've so far had good luck testing FMS with EC2, cloudfront has been awful. Whether I get an actual connection to a stream is hit or miss. Sometimes it connects. Sometimes it connects with no audio. Sometimes is says it's connected, but then shows me the play button (not playing). Delay is anywhere from 10 - 60 secs. Here are a couple of [URLs].
View 3 Replies
Apr 6, 2010
I have a flex app which allows user to create some content. this content will then be sent via xml back to the server:
private function saveBackXMLToServer():void {
var params:Object = {};
params["xml_file"] = XML_content();
http_Service.send(params);
}
My problem is, that the transport of the data this way is very slow... It takes about 20 sec for 10'000 lines of XML... How can this be done better?
I'm trying to follow all of your hints, but they don't seem to be simple to change. My code is done in a way that I can't get access to every Object, and save it. So what I do is to load the swf file with one xml, and return the whole xml after I run it. My guess is, that the time isn't spent on transporting those lines to the web server (this task gets done quickly normally), I thing that there happens something on the send function of the HTTPService that every object must get changed, before sending...
UPDATE2: I just realized that it is not a matter of the flex app it is a matter of the rails app. It receives a 700 KB String. I guess it is not done for handling such a object. How to transport it then? I tryed to work with the file upload but couldn't get it done... Error 2037 was occuring! I'll go on trying.
View 5 Replies
Mar 10, 2009
I would like to make a text command "terminal" similar to one found in that game: [URL]. I'm guessing that i need to play around with IndexOf() function?? Unfortunately I don't feel that comfortable with scripting yet.
View 5 Replies
Aug 6, 2009
We have installed FMS on our godaddy server to work with and used live video streaming services. We are having problems with the video quality being choppy, slow and pauses continuously during live broadcast and motion. We can't figure what is wrong; video needs to be flawless and in high quality. The godaddy server is running:
Red Hat Fedora Core 7
Intel Core 2 Duo - 2.13 GHzRAM
2 GB RAM
250 GB Total Disk Space
I am facing below mentioned problem regarding video broadcasting with adobe flash media interactive server (Developers version). I am using DVRCAST for recording video from a webcam and broadcasting the same live. Please find video settings below.
width:320
height:240
fps:15
quality:90
bandwidth:150
buffer time:0.01
Our problem is that videos are not playing smoothly in application. The motion is getting paused and interrupted in time of broadcast live. I downloaded and checked the recorded flv files from server and found the recorded file also has same problem. So this problem is appearing in time of streaming the video from client computer to fms server. This problem is not appearing when I am testing the application in my localhost.
My code for live streaming mentioned below:
private function publishCamera():void {
cam = Camera.getCamera();
cam.setMode(cameraSettings.width,cameraSettings.height,cameraSettings .fps);
cam.setQuality(cameraSettings.bandwidth,0);
cam.setQuality(cameraSettings.bandwidth,cameraSettings.quality);
[Code] .....
View 5 Replies
Feb 21, 2012
When concurrent users increases my a/v conent delivery to the client is very slow. or even drop. Feel breaks in the session. but when check my server rsourses, almost free. One more observation, when i liesten to the recorded stream everything seems to be fine like there is nothing oing bad in live session.
Is there somthing which is missing for concurrent users for FMS config file.
View 2 Replies
Jun 6, 2010
I have tried to make a kind of terminal application that does the following things (in the corresponding order):
1. Dynamically makes two text boxes on the stage (output and input)
2. Types the welcome message to the user in a typewriter-like effect
3. A text field for input then moves to the end of the text field for output
4. A cursor starts to blink in the input text field
I get 2 errors of the same code: 1120. It is because of my blinkRect function. (It adds and removes the rectangle from the stage, creating a cursor effect.) It uses the commands addChild(blink) and removeChild(blink) after the rectangle has been added to the stage. But, from the looks of the flash error, it seems as if the ActionScript engine parses this code before making the rectangle. I don't understand this, as I have not programmed it this way.Here's my code (and there's nothing on the stage, so just pasting it into a frame should exactly replicate my problem):
Code:
// IMPORT CLASSES
import fl.transitions.Tween;
import fl.transitions.easing.*;[code]...
View 2 Replies
Aug 1, 2011
Does anybody know of an existing Flex component that does VT500 terminal emulation? We are gradually replacing terminal-based user interfaces with an AIR-based GUI.We would like to have a terminal emulator embedded in that new AIR GUI, in order to give our users an integrated user experience when navigating between our old and new software.Emulation of other VT-series terminals than the VT500 could also be usefull.Btw, I'm not interested in writing it myself (nor having it written for me) because it would only be a nice-to-have in our software architecture.
View 1 Replies
Feb 19, 2012
I am trying to create a rails controller in ubuntu terminal with "rails generate controller test_it"
But I keep getting a screwy error.
[Code]...
View 1 Replies
Oct 20, 2008
Some stuff is as fast as before, like scrubbing and playing and applying a tween.But other, simple stuff, like selecting frames, adding frames - regular or key - takes 2-5 seconds each. Really anything with the timeline is slow. This happens especially with long movies (1.5 minutes - 2500 frames). Which shouldn't matter. I had movies 5 minutes long working fine.
View 21 Replies
Feb 12, 2009
I have Flash CS3 installed (windows) I have two images, I shape tween from one to the other.
The .fla file is 15MB in size, and the .swf is 800kb,
My problem is that, even though I've set the animation to run at 30fps, I barley manage more than 1.4fps a second, it should take 5seconds to complete, yet its taking 140seconds.
I have a 2GHZ dual core PC, with 2GB RAM,
I want it to be a smooth transition.
View 2 Replies
Oct 29, 2009
I did a flash application that has a login form in flash, and authenticates in php. That was 3 months ago, and the sending requests and response is very fast -- that is, when i click submit button, within 3 - 5 seconds it will have a response from php.
Recently, I did another login in flash, using similar code as I previously have done. Now, the sending request and respond is very long, each time the server may take up to 10 seconds to respond. Why is it taking so long yet the previous one is fast?
Same host, same php files, similar swf (not much changes in swf).
View 1 Replies
Jun 9, 2011
I found this, but got no idea how to slow it down:
var myTextLoader:URLLoader = new URLLoader();
myTextLoader.addEventListener (Event.COMPLETE,onLoaded);
function onLoaded (e:Event):void {
tekstbx.text = e.target.data;
tekstbx.addEventListener (Event.ENTER_FRAME,efh);
View 2 Replies
Nov 21, 2011
I have a Wordpress website located here: http:[url]....I'm trying to figure out why the page loads slow - I'm almost sure it has to do with Flash and size of images, plus rotating banner. I don't know how to edit or fix the problem though. So the question is: What is causing my website to load slow, and what EXACT steps can I take to fix the problem.I've already tried adjusting some of the browser ActiveX filters and other temp fixes, but that is not the proper solution. If this is a flash or image loading issue, can you tell me the EXACT step in how to edit these issues?
View 1 Replies
Oct 27, 2007
I'm running web browser over RDP (Terminal Server). However, the flash animation is slow over RDP. Is there anything can be done or perhaps anything to tell flash player to drop frames during animation?
View 0 Replies
Feb 10, 2009
I am testing a swf on my MAC Intel 2.6ghz duo-core with Firefox and am averaging 20 - 25 FPS. When i test the same swf on Firefox via VMware running Windows XP it is averaging 10 - 15 FPS. Does anyone know if it's VMWare that's causing the slowdown or is it Firefox on Windows that could be the problem?
View 2 Replies
Sep 11, 2010
I've been working on a game for a while now, just to realize now that flash is too damn slow to handle it. Wtf...
It relies heavily on particle emitters. I have an array of about 20 objects at any point in time on screen. And another with around 5-600. I'm using BitmapData.hitTest on each of the 20 against each of the 5-600 every frame. If it's only a few hundred it's fine, but upwards it just slows down. A lot. There has to be a way to optimize this. I don't understand how flash can handle something like away3D or all of the great 2d physics engines out there just fine, but not this..
View 14 Replies
Jan 28, 2010
is there a way to speed up flash movies playing when put up on the web. I created a web banner and uploaded it, when I open the website on the browser the flash movie pauses for a few minutes and does not play straight away. Is there any actionscript that will ensure the flash movie will play instantly when on the web? Is it the file size that is causeing the swf to run slower? Is it anything to do with the publish settings in the fla file?
View 4 Replies
May 12, 2009
I'm using Vista 64 on a more then adequate laptop, I initially used Flash CS4 and it was great for the past week but a few days ago it started geting really slow, whenever I copy, change frame, select something, basicaly any change action I have to wait about 5 seconds or more for a reaction. I'm using it for simple animation, no symbols, just 3 layers. I have a deadline coming up for my final production and if I can't fix this fast I'm screwed. I've tried every solution I can find, including trying Flash CS3 and Flash 8, nothing seems to fix the slow speed
View 8 Replies
Mar 3, 2010
Flash is just unusable, because of extremely slow performance. Selecting a tool or typing in actionscript takes forever. I've also noticed that sometimes (yes only sometimes), flash.exe takes alot of CPU usage, even when doing simple things like mentioned above.
At the same machine, 2 days ago, before upgrading from Vista Ultimate x64 to Windows 7 Ultimate x64, everything was working perfect.
View 1 Replies
Aug 11, 2010
I use Flash mainly for Slideshow Pro content and before CS5 I have used CS3 and CS4. I have never noticed issues with speed before, but since upgrading to CS5, my work has slowed to a crawl.
I am on a 64 bit machine Windows 7 machine very fast machine with 12 GB of memory, and while I realise that Flash is not a 64 bit program and can therefore not use all of that, I am wondering why it is so much slower than was CS4.
View 4 Replies
Sep 1, 2010
I use the facebook class [URL] in my project. When I compile my project (Air 2.0) with the facebook class it takes longer than one minute to compile.What would I do to make compiling faster? Compiling in Flash Builder seems much faster than in Flash CS5.
View 6 Replies
Apr 3, 2011
I´ve done an iPhone app with flash, just a simple rss feeder but it is extremely slow, is it suppose to be so or can I do it faster?
View 1 Replies
Apr 4, 2011
I animate flourish using adobe flash then export it as swf to use it again in another flash movie
when i import it i use these steps:
1- I make a symbol(movie clip)
2- I import the swf to the stage
3-then I back to Scene1 to control its size and position in my movie
BUT when I finish all these steps and play my movie the flurish too slow and not soft as original its cracks!
View 5 Replies
Jun 9, 2011
My version of Flash CS5 has recently become very slow to start up, taking well over a minute sometimes.It appears to stall for the longest time during a loading process called "Loading Accelerators" (yes, very ironic).Mac Pro running Mac OSX 10.6.7 (Snow Leopard) and 14Gb RAM.
View 4 Replies
